Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: item type CAN Bus FeatherWing; operating temperature (°c) -40°C to 125°C; pitch terminal block (mm) 3.5mm.

Key Highlights

  • Item Type: CAN Bus FeatherWing
  • Operating Temperature (°C): -40°C to 125°C
  • Pitch Terminal Block (mm): 3.5mm

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeCAN Bus FeatherWing
Operating Temperature (°C)-40°C to 125°C
Pitch Terminal Block (mm)3.5mm
Shipping Weight0.01 kg
Shipping Dimensions13 × 7 × 2 cm

Overview

The Adafruit CAN Bus FeatherWing - MCP2515 , made by Adafruit, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: CAN Bus FeatherWing
  • Operating Temperature (°C): -40°C to 125°C
  • Pitch Terminal Block (mm): 3.5mm
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 13 × 7 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Adafruit CAN Bus FeatherWing is the perfect solution for connecting your Feather board to a CAN Bus network. Originally designed for automotive and industrial applications, CAN Bus has now found its way into robotics and sensor networks where extended range and addressing capabilities are required. Unlike I2C, CAN Bus operates on a 2-wire differential interface, making it suitable for long-distance communication in noisy environments.

With a transmission rate of approximately 1Mbps, the bus frequency is set and synchronized among all connected devices. Each node on the network has a unique address, allowing it to selectively listen to messages intended for it. Adding new nodes to the network is simple, requiring only a connection to the shared data lines. Thanks to clever data encoding, message collisions are detected, and retransmissions occur to ensure reliable communication.

The Adafruit CAN Bus FeatherWing features the MCP2515 controller, a widely supported and popular chipset with Arduino and Circuit Python drivers. It only requires an SPI port and two pins for chip-select and IRQ. Adafruit CAN Bus FeatherWing - MCP2515  FeatherWing enables seamless transmission and reception of messages in both standard and extended formats, with a maximum data rate of 1 Mbps. Upgrade your Feather board with the Adafruit CAN Bus FeatherWing and unlock the potential for high-speed, reliable communication in your projects.


Features:

  1. MCP2515 Controller: Popular and well-supported chipset, compatible with Arduino and CircuitPython.
  2. 5V Charge-Pump: Generates 5V from a 3.3V Feather board to power the transceiver.
  3. 3.5mm Terminal Block: Provides easy access to High and Low data lines and ground.
  4. 120 Ohm Termination Resistor: Can be removed if not needed.
  5. Optional DE-9 Connector: For easy connection to a car’s CAN network (requires additional soldering).
  6. Pre-connected Pins: CS and INT pins for easy connections to Feather boards.

Package Include:

1 x Adafruit CAN Bus FeatherWing - MCP2515

Quick specs

Item Type
CAN Bus FeatherWing
Operating Temperature (°C)
-40°C to 125°C
Pitch Terminal Block (mm)
3.5mm
Shipping Weight
0.01 kg
Shipping Dimensions
13 × 7 × 2 cm
See all specifications