
1 / 3 · Click to enlarge
At a glance
Made by Adafruit, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: clocks 480MHz; esd protection 6KV; shipping weight 0.005 kg.
Key Highlights
- Small and easy to carry or mount
- Clocks: 480MHz
- ESD Protection: 6KV
- Shipping Weight: 0.005 kg
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Port | 4 USB 2.0 |
|---|---|
| Clocks | 480MHz |
| ESD Protection | 6KV |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 15 × 8 × 1 cm |
Overview
The Adafruit CH334F Mini 4-Port USB Hub Breakout, made by Adafruit, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Port: 4 USB 2.0 (confirm your cable or board uses the same connector)
- Clocks: 480MHz (make sure the rest of your system works at this frequency)
- ESD Protection: 6KV
- Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 15 × 8 × 1 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- 4-port USB HUB, providing 4 USB 2.0 downstream ports, backward compatible with USB 1.1 protocol specification
- Support high performance MTT mode, providing independent TT for each port to achieve full bandwidth concurrent transmission, with 4 times the total bandwidth of STT
- Support port status LED indicators
- Provides crystal oscillator with built-in capacitor, supports external 12MHz input, and built-in PLL provides 480MHz clock for USB PHY
- Built-in 1.5KΩ pull-up resistor on the upstream port, built-in pull-down resistor on the downstream port required for USB Host, streamlined periphery
- USB pins have 6KV enhanced ESD performance, Class 3A
Package Includes:
1 x Adafruit CH334F Mini 4-Port USB Hub BreakoutQuick specs
- Port
- 4 USB 2.0
- Clocks
- 480MHz
- ESD Protection
- 6KV
- Shipping Weight
- 0.005 kg
- Shipping Dimensions
- 15 × 8 × 1 cm



















