Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this wearable electronic is a good fit for everyday home and hobby use. Main specs: color Black; microcontroller ATmega16U4/ATmega32U4; flash memory 8-bit Microcontroller with 16/32K bytes of ISP Flash. Check that your power source supplies 3 ~ 6 before connecting it.

Key Highlights

  • Color: Black
  • Microcontroller: ATmega16U4/ATmega32U4
  • Flash Memory: 8-bit Microcontroller with 16/32K bytes of ISP Flash

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ColorBlack
MicrocontrollerATmega16U4/ATmega32U4
Operating Voltage (VDC)3 ~ 6
Flash Memory8-bit Microcontroller with 16/32K bytes of ISP Flash
Clock Speed8 MHz
USBMicro USB
InterfaceUART, I2C
No. of Timers/CountersTwo 16-bit Timer/Counter with Separate Prescaler
Pixels10 (neo)
Shipping Weight0.015 kg
Shipping Dimensions15 × 9.5 × 1 cm

Overview

The Adafruit Circuit Playground Classic, made by Adafruit, is listed in our wearable electronic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Color: Black
  • Microcontroller: ATmega16U4/ATmega32U4 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Operating Voltage (VDC): 3 ~ 6 (match this to your power supply; too high a voltage can damage the part)
  • Flash Memory: 8-bit Microcontroller with 16/32K bytes of ISP Flash (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Clock Speed: 8 MHz (make sure the rest of your system works at this frequency)
  • USB: Micro USB
  • Interface: UART, I2C (confirm your cable or board uses the same connector)
  • No. of Timers/Counters: Two 16-bit Timer/Counter with Separate Prescaler

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sewing required This is the Classic version of Circuit Playground, which comes with an ATmega32u4. It's designed to be used with Arduino IDE and code.org CS Discoveries only. It even comes with Firmata already programmed in, so you can use it immediately with code.org Discoveries without any preparation or updates. If you would like to use Make Code or Circuit Python, check out Circuit Playground Express, which can be used with Make Code, Circuit Python or Arduino. Circuit Playground features an ATmega32u4 processor, just like our popular Flora. The board's also round and has alligator-clip pads around it so you don't have to solder or sew to make it work. You can power it from USB, a AAA battery pack, or with a Lipoly battery (for advanced users). Just program your code into the board then take it on the go
  1. ATmega32u4 Processor, running at 3.3V and 8MHz
  2. Micro USB port for programming and debugging with Arduino IDE
  3. USB port can act like serial port, keyboard, mouse, joystick or MIDI
Circuit Playground has built-in USB support. Built in USB means you plug it in to program it and it just shows up.  All you really need is a Micro-B data/sync USB cable - not included! With the new 1.6.4+ Arduino IDE, it takes only a few seconds to add support. The Circuit Playground has USB HID support, so it can act like a mouse or keyboard and attach directly to computers.

 Features:

  1. Includes I2C, UART, 8 pins that can do analog inputs, multiple PWM output
  2. 7 pads can act as capacitive touch inputs and the 1 remaining is a true analog output
  3. Green "ON" LED so you know its powered
  4. Red "#13" LED for basic blinking
  5. Reset button
  6. ATSAMD21 ARM Cortex M0 Processor, running at 3.3 V and 48 MHz
  7. 2 MB of SPI Flash storage, used primarily with Circuit Python to store code and libraries
  8. Micro USB port for programming and debugging
  9. USB port can act like serial port, keyboard, mouse, joystick or MIDI

Package Includes:

1 x Adafruit Circuit Playground Classic

Quick specs

Color
Black
Microcontroller
ATmega16U4/ATmega32U4
Operating Voltage (VDC)
3 ~ 6
Flash Memory
8-bit Microcontroller with 16/32K bytes of ISP Flash
Clock Speed
8 MHz
USB
Micro USB
See all specifications