
1 / 4 · Click to enlarge
AI Summary
A compact USB-to-serial adapter with Micro USB, switchable 3.3V/5V levels, and RX/TX LEDs. Extra-long headers make it easy to plug into a breadboard for Arduino and XBee projects.
Key Highlights
- Genuine FTDI chip for reliable USB-to-serial communication
- Micro USB port for common, easy connectivity
- Selectable 3.3V or 5V power and signal levels
- Onboard red and green LEDs indicate RX/TX activity
- Extra-long headers included for breadboard use
- Compact 38.07 x 17.89 mm board weighs only 3.4 g
Ideal For
- Arduino and microcontroller hobbyists needing USB-to-serial
- XBee radio users configuring modules
- Embedded developers adding serial debugging
- Makers working with breadboard prototypes
- Educators teaching serial communication basics
Buying Tip
Remember to bring your own Micro USB cable, as one is not included with the board.
Elecvora expert review
Our verdict
The Adafruit FTDI Friend V3 is a well-designed USB-to-serial adapter that offers useful flexibility with selectable voltage levels and breadboard-friendly headers. It is a solid choice for anyone who needs a reliable bridge between a computer and serial devices.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Genuine FTDI chip ensures dependable communication
- Switchable 3.3V/5V levels suit many devices
- RX/TX LEDs provide clear activity feedback
- Extra-long headers simplify breadboard use
- Compact and lightweight design
Cons
- Micro USB cable not included
- Headers may require soldering for permanent use
- Not the fastest option for programming AVRs
Best for
Arduino and XBee users needing a flexible USB-to-serial adapter
Not ideal for
Those wanting a ready-to-use cable without any wiring or soldering
Specifications
| Operating Voltage (V) | 3.3 to 5 |
|---|---|
| Port | Micro-USB |
| Length (mm) | 38.07mm |
| Width (mm) | 17.89mm |
| Weight (g) | 3.4g |
| Shipping Weight | 0.004 kg |
| Shipping Dimensions | 14 × 8 × 2 cm |
What's in the box
- FTDI Friend V3 board
- Extra-long headers
Frequently Asked Questions
What is the FTDI Friend used for?
Does it work with both 3.3V and 5V systems?
Is a Micro USB cable included?
Can I use it to program Arduino boards?
What do the LEDs indicate?
How do I connect it to a breadboard?
Overview
The Adafruit FTDI Friend V3 is a tweaked-out USB-to-serial adapter built around a genuine FTDI chip. It connects to your computer through a Micro USB port and breaks out the signals you need to talk to microcontrollers, sensors, and other serial devices. Unlike a fixed cable, the Friend lets you adjust power and logic levels to suit your project, and its extra-long headers make it simple to plug into a breadboard without soldering.
Key Features
- Genuine FTDI chip for dependable USB-to-serial conversion.
- Micro USB port for widely available cables and easy connection.
- Selectable 3.3V or 5V power and signal levels to match your target board.
- RX and TX LEDs pulse when data is sent or received, giving instant visual feedback.
- Extra-long headers included so you can plug the board straight into a breadboard.
- Compact and light at 38.07 x 17.89 mm and just 3.4 g.
Specifications Explained
The operating voltage range of 3.3V to 5V means you can configure the Friend to power and communicate with both 3.3V and 5V logic systems. The Micro USB port is the common connector found on many modern devices, so you likely already have a suitable cable. Measuring 38.07 mm long and 17.89 mm wide, the board is small enough to sit unobtrusively on a breadboard, and at 3.4 g it adds negligible weight to your setup. The shipping weight of 0.004 kg and compact shipping dimensions of 14 x 8 x 2 cm reflect a package designed for low-cost, letter-friendly delivery.
Compatibility and Requirements
The FTDI Friend works with systems that use serial communication over USB. It supports both 3.3V and 5V signal levels, making it suitable for a broad range of microcontrollers and modules, including Arduino derivatives and XBee radios. You will need a Micro USB cable (not included) to connect the Friend to your computer, and a host computer with USB ports. The extra-long headers are included for breadboard integration; soldering may be required if you want to use them permanently.
Typical Uses
- Uploading sketches to Arduino-compatible boards that lack a built-in USB interface.
- Configuring and communicating with XBee modules.
- Adding serial debugging output to embedded projects.
- Programming AVR microcontrollers (slower than dedicated programmers but functional).
- General USB-to-serial bridging for sensors, GPS modules, and other serial devices.
What's in the Box
The package includes the FTDI Friend V3 board with extra-long headers. A Micro USB cable is not included, so you will need to supply your own.
Quick specs
- Operating Voltage (V)
- 3.3 to 5
- Port
- Micro-USB
- Length (mm)
- 38.07mm
- Width (mm)
- 17.89mm
- Weight (g)
- 3.4g
- Shipping Weight
- 0.004 kg



















