
1 / 2 · Click to enlarge
At a glance
Made by Adafruit, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Adapter Board; operating voltage (v) 3.3; length (mm) 40.7. Check that your power source supplies 3.3 before connecting it.
Key Highlights
- Model No. / Name: Adapter Board
- Operating Voltage (V): 3.3
- Length (mm): 40.7
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | Adapter Board |
|---|---|
| Operating Voltage (V) | 3.3 |
| Length (mm) | 40.7 |
| Width (mm) | 29 |
| Weight (g) | 14.1 |
| Shipping Weight | 0.012 kg |
| Shipping Dimensions | 5 × 4 × 2 cm |
Overview
The Adafruit PC Joystick to Seesaw I2C Adapter - STEMMA QT / Qwiic, made by Adafruit, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Adapter Board
- Operating Voltage (V): 3.3 (match this to your power supply; too high a voltage can damage the part)
- Length (mm): 40.7 (measure your mounting space before ordering)
- Width (mm): 29 (measure your mounting space before ordering)
- Weight (g): 14.1 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.012 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 5 × 4 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Adafruit PC Joystick to seesaw I2C Adapter allows you to connect classic PC joysticks to modern microcontrollers or microcomputers via I2C. Featuring a 15-pin D-Sub socket, it makes it easy to integrate older joystick controllers without needing to modify any cables. Powered by an ATtiny816 chip, the board functions as an I2C peripheral, providing readouts for the joystick's X and Y axes as well as its buttons.
With two STEMMA QT ports, you can easily connect the board using 4-pin JST SH cables to any device that supports I2C. The adapter also includes a 5V power generator, ensuring proper voltage for the joystick. It ships fully assembled with optional header pins for breadboard use, and example code is available for both Arduino and CircuitPython/Python, making it an ideal solution for integrating retro joystick controllers into your projects.
Features:
- Classic Joystick Support: 15-pin D-Sub socket for connecting classic PC joysticks.
- I2C Interface: ATtiny816 chip acts as an I2C peripheral, making it easy to read joystick X & Y axes and buttons.
- STEMMA QT Ports: Two ports for easy plug-and-play connectivity with microcontrollers or microcomputers via I2C using 4-pin JST SH cables.
- 5V Power Generation: Onboard power generator to supply 5V to the joystick.
- Easy Integration: No need for analog inputs on your microcontroller; works with Arduino, CircuitPython, or Python.
- Fully Assembled: Ships fully assembled and tested, with optional header for breadboard use (easy to solder).
- Example Code: Available for Arduino and CircuitPython/Python for quick setup.
Package Includes:
1 x Adafruit PC Joystick to seesaw I2C Adapter
Quick specs
- Model No. / Name
- Adapter Board
- Operating Voltage (V)
- 3.3
- Length (mm)
- 40.7
- Width (mm)
- 29
- Weight (g)
- 14.1
- Shipping Weight
- 0.012 kg



















