Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this adafruit module is a good fit for makers, students and electronics hobbyists. Main specs: item type Accelerometer; model no. / name Accelerometer Sensor; operating voltage (vdc) 3.3 to 5. Check that your power source supplies 3.3 to 5 before connecting it.

Key Highlights

  • Item Type: Accelerometer
  • Model No. / Name: Accelerometer Sensor
  • Operating Voltage (VDC): 3.3 to 5

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeAccelerometer
Model No. / NameAccelerometer Sensor
Operating Voltage (VDC)3.3 to 5
Scale±2g , ±4g , ±8g , or ±16g
Data Transfer Rate1Hz - 5Khz
Communication ProtocolI2C, SPI
Sensing AxisThree axis sensing, 10-bit precision
Shipping Weight0.006 kg
Shipping Dimensions14 × 8 × 1 cm

Overview

The Adafruit LIS3DH Triple-Axis Accelerometer ±2/4/8/16g, made by Adafruit, is listed in our adafruit module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Accelerometer (space for firmware, files or media)
  • Model No. / Name: Accelerometer Sensor (space for firmware, files or media)
  • Operating Voltage (VDC): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
  • Scale: ±2g , ±4g , ±8g , or ±16g
  • Data Transfer Rate: 1Hz - 5Khz (make sure the rest of your system works at this frequency)
  • Communication Protocol: I2C, SPI
  • Sensing Axis: Three axis sensing, 10-bit precision
  • Shipping Weight: 0.006 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Adafruit LIS3DH breakout is a feature filled, low power, accelerometer that is configurable to several ranges of sensitivity. This accelerometer chipset is commonly found in a lot of commercial products so Adafruit has thrown together a convenient breakout board to test and experiment with it! The LIS3DH sensor has multiple data rate options ranging from 1Hz to 5Khz and has ±2g , ±4g , ±8g , or ±16g selectable scaling. The sensor communicates using I2C (2 address available) or SPI and is both 5V and 3.3V logic compatible. It can be mounted using the two 2.5mm mounting holes and includes a small chunk of breakaway header if you are using this with a breadboard or perfboard.
In addition to all of this, there are also 3 extra 10 bit precision analog to digital pins available that can be read over I2C. Please Note: As of December 2020 we are now carrying the updated version of this sensor. Adafruit has updated this to be STEMMA QT and Qwiic compatible – that means there’s now an easy way to plug-and-play this sensor without any soldering!

Features:

  1. Three axis sensing, 10-bit precision
  2. ±2g/±4g/±8g/±16g selectable scaling
  3. As low as 2uA current draw
  4. Multiple data rate options 1 Hz to 5Khz
  5. Interrupt output
  6. Dimensions: 20.6 x 20.3 x 2.6mm / 0.8 x 0.8 x 0.1″
  7. additional ADC inputs
  8. Tap, Double-tap, orientation & freefall detection

Package Includes:

1 x Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g)

Quick specs

Item Type
Accelerometer
Model No. / Name
Accelerometer Sensor
Operating Voltage (VDC)
3.3 to 5
Scale
±2g , ±4g , ±8g , or ±16g
Data Transfer Rate
1Hz - 5Khz
Communication Protocol
I2C, SPI
See all specifications