
1 / 2 · Click to enlarge
At a glance
Made by Adafruit, this adafruit module is a good fit for makers, students and electronics hobbyists. Main specs: item type Pressure Sensor; model no. / name Pressure Sensor Module; accuracy ±0.5 hPa.
Key Highlights
- Item Type: Pressure Sensor
- Model No. / Name: Pressure Sensor Module
- Accuracy: ±0.5 hPa
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Pressure Sensor |
|---|---|
| Model No. / Name | Pressure Sensor Module |
| Accuracy | ±0.5 hPa |
| Sampling Rate | Up to 200 Hz |
| Interface | I2C/MIPI I3CSM |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 14 × 8 × 2 cm |
Overview
The Adafruit LPS28 (LPS28DFW) Pressure Sensor, made by Adafruit, is listed in our adafruit module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Pressure Sensor
- Model No. / Name: Pressure Sensor Module
- Accuracy: ±0.5 hPa
- Sampling Rate: Up to 200 Hz (your supply must deliver at least this much current)
- Interface: I2C/MIPI I3CSM (confirm your cable or board uses the same connector)
- Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 14 × 8 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Adafruit LPS28 (LPS28DFW) Pressure Sensor is designed for high-pressure ranges, ideal for both altitude and deep-water sensing applications. Unlike other sensors that top out at 1260 hPa, this sensor can handle pressures as low as 4060 hPa, making it suitable for underwater devices or robots that require pressure data from extreme depths (up to -43,000 feet or 40 meters underwater). It provides 24-bit precision with an accuracy of ±0.5 hPa, ideal for precise altitude measurements. It supports up to 200 samples per second and comes with an I2C interface for easy integration.
Features:
- Accuracy: 0.5 hPa absolute pressure accuracy.
- Data Output: 24-bit pressure data.
- Sampling Rate: ODR from 1 Hz to 200 Hz.
- Interface: I2C or MIPI I3C interface for easy communication.
- Temperature Compensation: Embedded for accurate readings.
- FIFO Support: For efficient data collection and storage.
- Interrupt Functions: Data-ready, FIFO flags, and pressure thresholds.
- Easy Integration: Comes with STEMMA QT connectors for easy I2C integration with Feather, Raspberry Pi, or Arduino boards.
Package Include:
1 x Adafruit LPS28 (LPS28DFW) Pressure SensorQuick specs
- Item Type
- Pressure Sensor
- Model No. / Name
- Pressure Sensor Module
- Accuracy
- ±0.5 hPa
- Sampling Rate
- Up to 200 Hz
- Interface
- I2C/MIPI I3CSM
- Shipping Weight
- 0.01 kg


















