Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this light sensor modules is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Light Sensor; operating voltage (vdc) 3.3 V to 5 V DC; interface I2C Interface. Check that your power source supplies 3.3 V to 5 V DC before connecting it.

Key Highlights

  • Model No. / Name: Light Sensor
  • Operating Voltage (VDC): 3.3 V to 5 V DC
  • Interface: I2C Interface

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameLight Sensor
Operating Voltage (VDC)3.3 V to 5 V DC
InterfaceI2C Interface
Resolution16-bit
Connector TypeSTEMMA QT
Length (mm)25.3
Width (mm)17.7
Weight (g)1.9
Shipping Weight0.011 kg
Shipping Dimensions4 × 3 × 2 cm

Overview

The Adafruit LTR-303 Light Sensor - STEMMA QT / Qwiic, made by Adafruit, is listed in our light sensor modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Light Sensor
  • Operating Voltage (VDC): 3.3 V to 5 V DC (match this to your power supply; too high a voltage can damage the part)
  • Interface: I2C Interface (confirm your cable or board uses the same connector)
  • Resolution: 16-bit
  • Connector Type: STEMMA QT (confirm your cable or board uses the same connector)
  • Length (mm): 25.3 (measure your mounting space before ordering)
  • Width (mm): 17.7 (measure your mounting space before ordering)
  • Weight (g): 1.9 (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Adafruit LTR-303 Light Sensor is a low-cost, easy-to-use I2C sensor for reliable light measurements. It detects Infrared and Visible+IR light, providing 16-bit readings with a range of 0 to 65K+ lux. With configurable gain and integration settings, it’s perfect for applications like adjusting display brightness or guiding robots toward light. It also includes IRQ capabilities for low-power operation. The sensor comes on a STEMMA QT PCB with voltage regulation, making it compatible with both 3.3V and 5V devices like Raspberry Pi and Arduino. The pins are broken out for easy breadboarding.


Features:

  1. I2C interface with up to Fast Mode @ 400kbit/s with address 0x29 (cannot be changed)
  2. Ultra-small ChipLED package
  3. Built-in temperature compensation circuit
  4. Low active power consumption with standby mode
  5. Operating temperature range from -30 C to +70 C
  6. RoHS and Halogen free compliant
  7. Light Sensor close to human eye spectral response
  8. Immunity to IR / UV Light Source
  9. Automatically rejects 50 / 60 Hz lighting flicker
  10. 6 dynamic ranges from 0.01 lux to 64k lux
  11. 16-bit effective resolution
  12. Interrupt output capability

Package Includes:

1 x Adafruit LTR-303 Light Sensor

Quick specs

Model No. / Name
Light Sensor
Operating Voltage (VDC)
3.3 V to 5 V DC
Interface
I2C Interface
Resolution
16-bit
Connector Type
STEMMA QT
Length (mm)
25.3
See all specifications