Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this light sensor modules is a good fit for makers, students and electronics hobbyists. Main specs: item type light sensor; model no. / name LTR-329; compatibility M2.5 standoffs.

Key Highlights

  • Item Type: light sensor
  • Model No. / Name: LTR-329
  • Compatibility: M2.5 standoffs

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item Typelight sensor
Model No. / NameLTR-329
CompatibilityM2.5 standoffs
Connector TypeUSB Type A
Shipping Weight0.01 kg
Shipping Dimensions12 × 8 × 3 cm

Overview

The ADAFRUIT LTR-329 Ambient Light Sensor, made by Adafruit, is listed in our light sensor modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: light sensor
  • Model No. / Name: LTR-329
  • Compatibility: M2.5 standoffs
  • Connector Type: USB Type A (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 12 × 8 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The LTR-329ALS-01 is a low voltage I2C digital light sensor [ALS] in a low cost miniature chipled lead-free surface mount package. This sensor converts light intensity to a digital output signal capable of direct I2C interface. It provides a linear response over a wide dynamic range from 0.01 lux to 64k lux and is well suited to applications under high ambient brightness. There are altogether six gain settings (1X, 2X, 4X, 8X, 48X and 96X) available for user to configure. Adafruit LTR-329 Light Sensor CMOS design and factory-set one time trimming capability ensure minimal sensor-to-sensor variations for ease of manufacturability to the end customers.


Features:

  1. LTR-329ALS-01 ambient light sensor chip – measures visible and infrared light for accurate lux readings.
  2. Wide measurement range: roughly 0.01 lux to ~64 k lux, suitable for low-light to bright sunlight conditions.
  3. 16-bit digital output – provides high-resolution light measurements over I²C.
  4. Dual light channels – separate visible and IR photodiodes allow precise ambient light detection and better human-eye response matching.
  5. I²C interface (STEMMA QT / Qwiic compatible) – 3 V–5 V logic safe; easy, solder-free connection with standard JST-SH cables.
  6. Voltage range: 3.0 V to 5.0 V power and logic operation.
  7. Low current consumption – ideal for battery-powered or always-on applications.
  8. Configurable gain and integration time – adjust sensitivity and measurement speed.
  9. Small, breadboard-friendly breakout board with mounting holes for easy integration.
  10. Built-in pull-up resistors on the I²C lines and level shifting for plug-and-play us

Package Include:

1 x Adafruit LTR-329 Light Sensor

Quick specs

Item Type
light sensor
Model No. / Name
LTR-329
Compatibility
M2.5 standoffs
Connector Type
USB Type A
Shipping Weight
0.01 kg
Shipping Dimensions
12 × 8 × 3 cm
See all specifications