Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact adapter that carries the HSTX output of a Feather RP2350 over a 22-pin FPC link to a DVI signal for HDMI displays. It lets RP2350 projects drive a monitor with a small, tidy board instead of custom high-speed wiring.

Key Highlights

  • Routes Feather RP2350 HSTX output to a DVI signal for HDMI displays
  • Uses a 22-pin FPC connection to the host board
  • Compact 25.9 x 24.9 mm board weighing only 4.3 g
  • Keeps high-speed video wiring short and organised
  • Simple breakout format for fast project integration
  • Light 5 g shipping weight for low-cost delivery

Ideal For

  • Makers building display projects on the Feather RP2350
  • Embedded developers prototyping video output
  • Educators teaching high-speed serial and display basics
  • Retro-computing enthusiasts using RP2350 boards
  • Compact builds where board size and weight matter

Buying Tip

Confirm you already have a Feather RP2350 and a matching 22-pin FPC cable, since this listing is the adapter board only.

Elecvora expert review

Our verdict

This is a focused, well-sized adapter for anyone who wants video out of a Feather RP2350 without designing high-speed routing themselves. It is a niche part, but for the right build it removes a lot of fiddly work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Purpose-built for the Feather RP2350 HSTX output
  • Very small and light at 25.9 x 24.9 mm and 4.3 g
  • Uses a tidy 22-pin FPC link instead of loose wiring
  • Simple breakout format that is quick to integrate

Cons

  • Requires a separate Feather RP2350 host board
  • Needs a compatible 22-pin FPC cable, which is not confirmed in the box
  • Only suits displays that accept a DVI signal

Best for

RP2350 makers who want a compact, reliable video output link

Not ideal for

Builds that need a full HDMI feature set or a self-contained display solution

Specifications

Item TypeBreakout Board
Model No. / NameRP2350
Input Interface22-pin FPC from Feather RP2350
Length (mm)25.9
Width (mm)24.9
Weight (g)4.3
Shipping Weight0.005 kg
Shipping Dimensions5 × 5 × 2 cm

Frequently Asked Questions

What does this adapter actually do?
It takes the HSTX output from a Feather RP2350 over a 22-pin FPC link and presents it as a DVI signal for HDMI displays.
Do I need a separate Feather RP2350?
Yes. This listing is the adapter board only, so the Feather RP2350 host board is required to use it.
Is an FPC cable included?
Package contents are not confirmed for this listing, so check with the seller or the packaging before ordering.
What kind of display can I use?
The adapter is intended for HDMI displays that accept a DVI signal, since that is the signal it presents.
How big is the board?
It measures 25.9 mm by 24.9 mm and weighs 4.3 grams, so it adds very little bulk to a build.
How should I handle the FPC connection?
Keep the cable clean, avoid sharp bends and make sure the connector is fully seated so the high-speed link stays reliable.

Overview

The Adafruit RP2350 22-pin FPC HSTX to DVI Adapter is a purpose-built breakout for projects that need video output from a Feather RP2350. It takes the high-speed HSTX signal from the host board through a 22-pin flexible printed circuit connection and presents it as a DVI signal that HDMI displays can commonly accept. Instead of hand-routing delicate high-speed traces, builders get a ready-made board that keeps the link short and the assembly neat.

At 25.9 mm long and 24.9 mm wide, and weighing just 4.3 grams, the adapter adds almost nothing to the size or weight of a build. It is aimed at makers, embedded developers and educators working with the RP2350 platform who want a display in the project without a custom PCB.

Key Features

  • Converts Feather RP2350 HSTX output over a 22-pin FPC link into a DVI signal for HDMI displays
  • Compact breakout footprint of 25.9 x 24.9 mm
  • Very light at 4.3 g, so it suits small and portable builds
  • Keeps high-speed video routing on a dedicated board rather than loose wiring
  • Simple integration with RP2350-based development projects

Specifications Explained

Input interface: the board accepts a 22-pin FPC connection from a Feather RP2350. This is the physical and electrical link to the microcontroller, so the matching FPC cable is essential to the build.

Signal path: the adapter carries the HSTX output and presents it as DVI. Many HDMI displays accept a DVI signal, which is why the board is described as an adapter for HDMI displays.

Size and weight: the 25.9 x 24.9 mm dimensions and 4.3 g weight mean the adapter can sit close to the host board without crowding a compact enclosure.

Compatibility and Requirements

The adapter is designed for the Feather RP2350 and its 22-pin FPC HSTX output. A compatible 22-pin FPC cable is required to connect the two boards, and a display that accepts a DVI signal is needed at the other end. The adapter does not include the Feather RP2350 host board or the display.

Typical Uses

  • Adding a monitor output to an RP2350 graphics or demo project
  • Compact retro-computing and terminal-style builds
  • Embedded dashboards and status displays
  • Teaching projects that explore high-speed video output
  • Prototyping where a tidy, short video link matters

What's in the Box

Package contents are not confirmed for this listing. Check the product packaging or ask the seller before ordering if you need to know exactly what is included.

Quick specs

Item Type
Breakout Board
Model No. / Name
RP2350
Input Interface
22-pin FPC from Feather RP2350
Length (mm)
25.9
Width (mm)
24.9
Weight (g)
4.3
See all specifications