
1 / 4 · Click to enlarge
At a glance
Made by Adafruit, this breakout board is a good fit for makers, students and electronics hobbyists. Main specs: item type Breakout Board; model no. / name RS232; supply voltage 3V to 5.5V. Check that your power source supplies 3V to 5.5V before connecting it.
Key Highlights
- Item Type: Breakout Board
- Model No. / Name: RS232
- Supply Voltage: 3V to 5.5V
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Breakout Board |
|---|---|
| Model No. / Name | RS232 |
| Supply Voltage | 3V to 5.5V |
| Data Rate | Up to 250 kbit/s |
| Power Consumption | 300 μA |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 4 × 4 × 2 cm |
Overview
The Adafruit RS232 Full Breakout with DE9-M, made by Adafruit, is listed in our breakout board range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Breakout Board
- Model No. / Name: RS232
- Supply Voltage: 3V to 5.5V (match this to your power supply; too high a voltage can damage the part)
- Data Rate: Up to 250 kbit/s
- Power Consumption: 300 μA
- Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 4 × 4 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Operates With 3-V to 5-V VCC Supply
- Single-Chip and Single-Supply Interface for IBM™ PC/AT™ Serial Port
- RS-232 Bus-Pin ESD Protection of ±15 kV Using Human-Body Model (HBM)
- Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU V.28 Standards
- Three Drivers and Five Receivers
- Operates Up To 250 kbit/s
- Low Active Current: 300 μA Typical
- Low Standby Current: 1 μA Typical
- Accepts 5-V Logic Input With 3.3-V Supply
- Serial-Mouse Driveability
Package Includes:
1 x Adafruit RS232 Full Breakout BoardQuick specs
- Item Type
- Breakout Board
- Model No. / Name
- RS232
- Supply Voltage
- 3V to 5.5V
- Data Rate
- Up to 250 kbit/s
- Power Consumption
- 300 μA
- Shipping Weight
- 0.015 kg



















