Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A plug-and-play adapter board that links Sensirion SEN6x series sensors to your microcontroller over a STEMMA QT / Qwiic I2C connection. Onboard 3.3V regulation and level shifting let it work with both 3.3V and 5V logic systems.

Key Highlights

  • Plug-and-play adapter for Sensirion SEN6x series sensors
  • JST GH-compatible 6-pin connector for quick, solder-free setup
  • Integrated 3.3V regulator and logic level shifter onboard
  • Works with both 3.3V and 5V logic systems
  • STEMMA QT / Qwiic port for fast I2C integration
  • Compact 25.6 x 17.8 mm board weighing about 2 g

Ideal For

  • Makers building indoor air quality monitors
  • Students and educators running environmental sensor labs
  • Developers prototyping I2C sensor nodes
  • Raspberry Pi and microcontroller hobbyists
  • Engineers adding particulate and humidity sensing to a product

Buying Tip

Check that your SEN66 sensor uses the 6-pin JST GH-compatible connector and that you have a STEMMA QT / Qwiic cable on hand, since neither the sensor nor the cable is included.

Elecvora expert review

Our verdict

This is a tidy, well-considered adapter that removes the fiddly part of using a Sensirion SEN6x sensor. It is not a sensor in itself, but for anyone who already owns a SEN66 it saves time and reduces wiring errors.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • No soldering needed for the sensor connection
  • Onboard 3.3V regulation and level shifting
  • Works with both 3.3V and 5V logic
  • STEMMA QT / Qwiic port speeds up I2C wiring
  • Very small and light

Cons

  • Sensor and STEMMA QT / Qwiic cable are not included
  • Adds a small amount of cost on top of the sensor itself
  • Limited to the SEN6x series connector standard

Best for

Makers and developers who want a quick, reliable I2C link to a Sensirion SEN6x sensor

Not ideal for

Buyers looking for a complete sensor module with cable included

Specifications

Item TypeBreakout Board
Model No. / NameSEN66
CompatibilitySEN6x Series
Operating Voltage (V)3– 5
Length (mm)25.6
Width (mm)17.8
Weight (g)2.0
Shipping Weight0.015 kg
Shipping Dimensions8 × 5 × 1 cm

What's in the box

  • 1 x Adafruit SEN6x Breakout for Sensirion SEN66 - STEMMA QT / Qwiic
  • 1 x Header pin

Frequently Asked Questions

Is the SEN66 sensor included?
No. The pack contains the breakout board and one header pin only. You will need to supply a compatible SEN6x series sensor separately.
Which sensors does this board work with?
It is designed for the Sensirion SEN6x series, including the SEN66, using the JST GH-compatible 6-pin connector.
Can I use it with a 5V microcontroller?
Yes. The board accepts 3–5V and includes a 3.3V regulator and logic level shifter, so it works with both 3.3V and 5V logic systems.
Do I need to solder anything?
Not for the sensor connection. The sensor plugs into the JST GH-compatible connector, and the host links through the STEMMA QT / Qwiic port. You only need to fit the supplied header pin if your mounting method requires it.
What software do I need?
Sensirion provides Arduino and Raspberry Pi libraries for the SEN6x series. Install the appropriate library and run an example to start reading data over I2C.
How should I store and handle the board?
Keep it in an antistatic bag or a dry container when not in use, and avoid flexing the board or pulling on cables to prevent damage to the connectors.

Overview

The Adafruit SEN6x Breakout is a small adapter board built to take the hassle out of wiring a Sensirion SEN66 or another sensor from the SEN6x series. Instead of building your own harness, you connect the sensor through its JST GH-compatible 6-pin connector and link the board to your host device with a STEMMA QT / Qwiic cable over I2C. The result is a tidy, repeatable connection that is easy to move between projects.

Because the board carries its own 3.3V regulator and logic level shifter, it can sit between the sensor and either a 3.3V or a 5V logic system. That flexibility makes it a practical choice for mixed hardware setups where boards from different generations share a bus.

Key Features

  • Plug-and-play adapter for Sensirion SEN6x series sensors
  • JST GH-compatible 6-pin connector for quick setup
  • Integrated 3.3V regulator and logic level shifter
  • Supports 3.3V and 5V logic for flexible compatibility
  • STEMMA QT / Qwiic port for rapid I2C integration
  • Works with Sensirion Arduino and Raspberry Pi libraries

Specifications Explained

Operating voltage

The board accepts 3–5V, and its onboard regulation and level shifting handle the conversion for you. In practice this means you can power and communicate with it from a 3.3V board or a 5V board without adding extra components.

Size and weight

At 25.6 mm long, 17.8 mm wide and roughly 2 g, the breakout adds almost nothing to the bulk of your build. It fits comfortably inside small enclosures and on crowded prototype plates.

Connectors

A JST GH-compatible 6-pin header takes the sensor cable, while the STEMMA QT / Qwiic port handles the link to your microcontroller or single-board computer. Both are keyed connectors, which reduces the chance of miswiring during assembly.

Compatibility and Requirements

The breakout is designed for the Sensirion SEN6x series, including the SEN66. It works with 3.3V and 5V logic systems. To read data you will need a host microcontroller or single-board computer with an I2C bus, a suitable STEMMA QT / Qwiic cable, and Sensirion's Arduino or Python library. A header pin is supplied in the pack for header-based mounting.

Typical Uses

  • Indoor air quality monitoring projects
  • Environmental data logging with a Raspberry Pi or microcontroller
  • Classroom and university sensor experiments
  • Prototyping ventilation or filtration control systems
  • Adding particulate and humidity sensing to a custom enclosure

What's in the Box

  • 1 x Adafruit SEN6x Breakout for Sensirion SEN66 - STEMMA QT / Qwiic
  • 1 x Header pin

Quick specs

Item Type
Breakout Board
Model No. / Name
SEN66
Compatibility
SEN6x Series
Operating Voltage (V)
3– 5
Length (mm)
25.6
Width (mm)
17.8
See all specifications