
1 / 4 · Click to enlarge
AI Summary
A compact STEMMA QT board that measures barometric pressure (300–1100 hPa) and temperature with ±0.3 hPa and ±1°C accuracy. It connects solder-free over I2C or SPI and works with 3V or 5V microcontrollers.
Key Highlights
- Measures pressure 300–1100 hPa and temperature -40°C to +85°C
- ±0.3 hPa pressure accuracy and ±1°C temperature accuracy
- 24-bit ADC with calibration coefficients for precise readings
- STEMMA QT connectors for solderless I2C daisy-chaining
- On-board 3.3V regulator and logic level shifting
- Supports both I2C and SPI interfaces
Ideal For
- Drone and RC hobbyists needing altitude data
- Makers building weather stations or data loggers
- Electronics learners exploring I2C/SPI sensors
- STEMMA QT ecosystem users
- DIY altimeter and environmental monitoring projects
Buying Tip
Confirm your project can use I2C or SPI and that you have a STEMMA QT cable or plan to solder the included header for breadboard use.
Elecvora expert review
Our verdict
A well-integrated sensor board that simplifies adding pressure and temperature sensing to 3V or 5V projects. The STEMMA QT connectors and on-board regulation make it beginner-friendly, while the 24-bit ADC and good accuracy suit more demanding applications.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Solder-free STEMMA QT connections
- Works with 3V and 5V logic
- Good pressure accuracy of ±0.3 hPa
- Supports both I2C and SPI
Cons
- Requires a host microcontroller and cables
- Header pin needs soldering for breadboard use
- Limited to the specified pressure and temperature ranges
Best for
Makers and engineers needing reliable pressure and temperature sensing with easy connections
Not ideal for
Projects requiring pressure measurement outside 300–1100 hPa or temperature beyond -40°C to +85°C
Specifications
| Item Type | Pressure Sensor, Temperature Sensor |
|---|---|
| Model No. / Name | SPA06 003 |
| No. of Pins | 6 |
| Pressure Range (MPa) | 300 – 1100 hPa |
| Industrial temperature range | -40°C to +85°C |
| Accuracy | ±0.3 hPa(pressure), ±1°C(Temperature Accuracy) |
| Interface | I2C / SPI |
| ADC Resolution | 24-bit |
| Operating Voltage | 1.7 – 3.6V |
| Form factor | STEMMA QT |
| Length (mm) | 25.3 |
| Width (mm) | 17.7 |
| Weight (g) | 1.7 |
| Shipping Weight | 0.008 kg |
| Shipping Dimensions | 10 × 8 × 3 cm |
What's in the box
- 1 x Adafruit SPA06-003 Temperature + Pressure Sensor – STEMMA QT
- 1 x Header pin
Frequently Asked Questions
What is the pressure range of this sensor?
Can I use this sensor with a 5V microcontroller?
Does it support SPI as well as I2C?
What is included in the package?
Do I need to solder anything to use the STEMMA QT connector?
What is the temperature accuracy?
Overview
The Adafruit SPA06-003 Temperature + Pressure Sensor – STEMMA QT is a compact digital sensor board built around the SPA06-003 sensing element. It provides barometric pressure and temperature measurements for DIY electronics, drones, environmental monitoring and weather-related projects. The board is designed for easy integration: a 3.3V regulator and logic level shifting allow safe use with 3V and 5V microcontrollers, while STEMMA QT connectors enable solder-free I2C connections and simple chaining with other compatible sensors.
Key Features
- Dual measurement of barometric pressure and temperature
- Pressure range of 300 to 1100 hPa with ±0.3 hPa accuracy
- Temperature accuracy of ±1°C across -40°C to +85°C
- 24-bit ADC with calibration coefficients for stable readings
- I2C and SPI communication support
- STEMMA QT form factor for quick, solderless connections
- 6-pin layout and header pin included
Specifications Explained
The 300–1100 hPa pressure range covers typical atmospheric conditions from sea level to high altitudes, making the sensor suitable for altitude estimation and weather monitoring. The ±0.3 hPa pressure accuracy means small pressure changes can be detected, which is useful for relative altitude measurements. The ±1°C temperature accuracy is adequate for general environmental sensing. A 24-bit ADC provides high-resolution digitisation of the sensor signals, and the included calibration coefficients help maintain accuracy. The operating voltage of 1.7–3.6V is regulated on-board, so the board can be powered from a 5V supply while the sensor itself runs at a safe voltage. The STEMMA QT connectors accept compatible cables for solder-free I2C wiring.
Compatibility and Requirements
The board is compatible with microcontrollers that support I2C or SPI and operate at 3V or 5V logic, thanks to the on-board level shifting and 3.3V regulator. STEMMA QT connectors allow direct plug-and-play use with STEMMA QT hosts or cables; for breadboard use, the included header pin can be soldered. No additional components are required beyond a host microcontroller and suitable cables or headers. The sensor communicates over I2C or SPI, so the host must have an available bus.
Typical Uses
- Altitude sensing for drones and RC models
- Weather stations and environmental data logging
- DIY altimeters and pressure monitors
- Educational electronics projects
- Adding pressure and temperature sensing to STEMMA QT chains
What's in the Box
- 1 x Adafruit SPA06-003 Temperature + Pressure Sensor – STEMMA QT
- 1 x Header pin

Quick specs
- Item Type
- Pressure Sensor, Temperature Sensor
- Model No. / Name
- SPA06 003
- No. of Pins
- 6
- Pressure Range (MPa)
- 300 – 1100 hPa
- Industrial temperature range
- -40°C to +85°C
- Accuracy
- ±0.3 hPa(pressure), ±1°C(Temperature Accuracy)


















