
1 / 6 · Click to enlarge
At a glance
Made by Adafruit, this adafruit module is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.005 kg.
Key Highlights
- Shipping Weight: 0.005 kg
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Shipping Weight | 0.005 kg |
|---|---|
| Shipping Dimensions | 10 × 10 × 2 cm |
Overview
The Adafruit TMAG5273 (A2) 3D Hall Effect Magnetometer - ±133mT / 266mT - STEMMA QT, made by Adafruit, is listed in our adafruit module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 10 × 10 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Adafruit TMAG5273 (A2) 3D Hall Effect Magnetometer is a compact, low-power sensor designed for precise magnetic field detection across three axes. It integrates independent X, Y, and Z Hall-effect sensors with a 12-bit ADC for accurate digital output via I2C communication. Featuring a built-in CORDIC engine, it enables real-time 360° angle calculations for both on-axis and off-axis measurements. This makes it ideal for rotary encoders, motion tracking, and contactless control systems. The board includes STEMMA QT connectors for easy plug-and-play integration without soldering. With support for gain and offset correction, temperature sensing, and configurable power modes, this sensor offers flexibility and reliability for industrial and embedded electronics applications requiring magnetic sensing and position detection.
Specifications:
- Sensor Type : 3D Hall Effect Magnetometer
- Axes : X, Y, Z
- Magnetic Range : ±133mT, ±266mT
- ADC Resolution : 12-bit
- Interface : I2C
- Max I2C Clock Speed : 1 MHz
- I2C Features : CRC support, special frame reads
- I2C Address : Factory-programmed & user-configurable (re-written on reset)
- Conversion Rate : 20 kSPS (single axis)
- Averaging : Configurable up to 32x
- Conversion Trigger : I2C or dedicated INT pin
- Angle Calculation : Integrated CORDIC engine
- Angle Measurement : 360° (on-axis & off-axis)
- Gain & Offset Correction : Supported (user-managed)
- Sensitivity Drift : 5% (typical)
- Power Modes : Configurable
- Active Current : 2.3 mA
- Wake/Sleep Mode Current : 1 µA
- Sleep Mode Current : 5 nA
- Temperature Sensor : Built-in
- Temperature Compensation : Integrated (multi magnet types)
- Interrupt Feature : Magnetic & temperature threshold interrupt
- Logic Level Support : 3.3V & 5V compatible
- Connectivity : STEMMA QT / Qwiic (JST-SH)
- Mounting : 4 × 2.5mm holes
- Dimensions : 25.5 × 17.7 × 4.6 mm
- Weight : 1.7 gm
Features:
- 3-axis Hall-effect magnetic sensing
- Wide range ±133mT / ±266mT
- Integrated 12-bit ADC
- Built-in angle calculation (CORDIC engine)
- I2C interface with STEMMA QT support
- Onboard temperature sensor
- Configurable power modes
- Plug-and-play, no soldering required
Package Includes:
1 x Adafruit TMAG5273 (A2) 3D Hall Effect Magnetometer - ±133mT / 266mT - STEMMA QT
1 x Header Pin


















