Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: dimensions (l x w x h) mm 30.5mm x 15.2mm x 11.1mm; weight (g) 2.2g; shipping weight 0.002 kg.

Key Highlights

  • Dimensions (L x W x H) mm: 30.5mm x 15.2mm x 11.1mm
  • Weight (g): 2.2g
  • Shipping Weight: 0.002 kg

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Dimensions (L x W x H) mm30.5mm x 15.2mm x 11.1mm
Weight (g)2.2g
Shipping Weight0.002 kg
Shipping Dimensions15 × 8 × 2 cm

Overview

The Adafruit USB Type C Vertical Breakout - Downstream Connection, made by Adafruit, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Dimensions (L x W x H) mm: 30.5mm x 15.2mm x 11.1mm (measure your mounting space before ordering)
  • Weight (g): 2.2g (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.002 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 15 × 8 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Throw out all those Mini and Micro B USB cables you have in a plastic bin; the next generation of USB connectors is here with USB C! You will start to see these connectors pop up on all sorts of devices as the industry moves from micro B or lightening to the new standard. Well, at least until the next standard comes out. This is the vertical version. We also carry a classic 'horizontal' USB-C breakout here. USB C features a symmetric/reversible connector, more data pins, and higher current output capability. But, for most developers, the pin usage you know and love from older USB will work just fine. This breakout gives you all the basics you need and a resistor configuration that mimics classic USB 2.0 for a downstream connection The two 5.1K resistors on the CC pins indicate to the upstream port to provide 5V and up to 1.5A (whether the upstream can supply that much current depends on what you're connecting to. For most usages, you can connect VBUS to your 5V input, GND to ground, and D+ and D- as you expect. You can monitor the CC and SBU pins to determine cable polarity or send side-band data. Or leave them disconnected. Since this connector is vertical, we give you two identical breakout strips so it will stand flat on a breadboard, plus four mounting holes in case you want to attach this to an enclosure.

Features:

  1. Power and Data Lines
  2. Easy Integration
  3. Breakout Pads
  4. USB Type-C Connector
  5. Downstream Connection

Package Includes:

1 x Adafruit USB Type C Vertical Breakout - Downstream Connection

Quick specs

Dimensions (L x W x H) mm
30.5mm x 15.2mm x 11.1mm
Weight (g)
2.2g
Shipping Weight
0.002 kg
Shipping Dimensions
15 × 8 × 2 cm
See all specifications