Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this light sensor modules is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Proximity Sensor, Lux Sensor; operating voltage (v) 3.3 to 5; sensor range Proximity: 0mm to 200mm, Light: 0.0125lux to 6553lux. Check that your power source supplies 3.3 to 5 before connecting it.

Key Highlights

  • Model No. / Name: Proximity Sensor, Lux Sensor
  • Operating Voltage (V): 3.3 to 5
  • Sensor range: Proximity: 0mm to 200mm, Light: 0.0125lux to 6553lux

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameProximity Sensor, Lux Sensor
Operating Voltage (V)3.3 to 5
Sensor rangeProximity: 0mm to 200mm, Light: 0.0125lux to 6553lux
Communication ModeI2C
Length (mm)25.3
Width (mm)17.8
Weight (g)1.7
Shipping Weight0.005 kg
Shipping Dimensions3 × 2 × 1 cm

Overview

The Adafruit VCNL4040 Proximity and Lux Sensor - STEMMA QT/Qwiic, made by Adafruit, is listed in our light sensor modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Proximity Sensor, Lux Sensor (lumens measure total light output; higher is brighter)
  • Operating Voltage (V): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
  • Sensor range: Proximity: 0mm to 200mm, Light: 0.0125lux to 6553lux (quoted range is usually line-of-sight; walls and interference shorten it)
  • Communication Mode: I2C
  • Length (mm): 25.3 (measure your mounting space before ordering)
  • Width (mm): 17.8 (measure your mounting space before ordering)
  • Weight (g): 1.7 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Adafruit VCNL4040 Proximity and Lux Sensor features a proximity sensor that works from 0mm to 200mm and a light sensor ranging from 0.0125lux to 6553lux. This sensor is placed on a breakout board with support circuitry that allows the board to be used with 5V (Arduino/ Metro328) or 3.3V (Feather/Raspberry Pi) logic levels. The VCNL4040 proximity and lux sensor use an I2C interface to seamlessly connect it up with two wires (plus power and ground). This sensor includes the SparkFun qwiic compatible STEMMA QT connectors for the I2C bus.
The VCNL4040 proximity and lux sensor are capable of adjusting the integration time to set the sensitivity of measurements depending on the lighting conditions. This sensor collects measurements for a short period of time and with an integration time of 80ms, each measurement bit of light represents a larger amount of light. If the integration time is increased, then the sensitivity and resolution within the measurement range also increase.
The VCNL4040 proximity and lux sensor are also capable of changing the current and duty cycle of the IR LED that powers the proximity detection to adjust how sensitive proximity measurements are.

Package Includes:

 1 x Adafruit VCNL4040 Proximity and Lux Sensor - STEMMA QT/Qwiic

Quick specs

Model No. / Name
Proximity Sensor, Lux Sensor
Operating Voltage (V)
3.3 to 5
Sensor range
Proximity: 0mm to 200mm, Light: 0.0125lux to 6553lux
Communication Mode
I2C
Length (mm)
25.3
Width (mm)
17.8
See all specifications