
1 / 4 · Click to enlarge
AI Summary
A compact USB serial UPDI programmer for modern ATtiny chips, with selectable 3V or 5V power and logic. USB Type C input, a CH340E converter and an included JST SH cable make breadboard programming quick.
Key Highlights
- USB serial UPDI programmer for ATtiny816, ATtiny817 and ATtiny1616 chips
- Selectable 3V or 5V power and logic to match your target board
- Onboard 3V regulator supplies up to 500mA for larger projects
- CH340E USB serial converter with cross-platform drivers
- USB Type C connector for data and power from any computer
- JST SH cable and 0.1 inch breakout holes for fast breadboard wiring
Ideal For
- Embedded developers working with modern ATtiny microcontrollers
- Makers building small ATtiny-based sensor and controller projects
- Students learning microcontroller programming in electronics courses
- Workshops and labs that need a reusable breadboard programmer
- Prototypers who want selectable 3V or 5V logic in one tool
Buying Tip
Confirm your target chip uses the UPDI interface and set the board to the same voltage as your circuit before connecting it.
Elecvora expert review
Our verdict
A tidy, well-considered programmer that removes the fiddly wiring normally needed to flash modern ATtiny chips. The voltage selection and generous regulator headroom make it more versatile than a bare USB serial adapter.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Selectable 3V or 5V power and logic
- Regulator rated up to 500mA
- CH340E converter with cross-platform drivers
- USB Type C and included JST SH cable
- Compact board with clear power and activity LEDs
Cons
- Limited to modern UPDI-capable ATtiny chips
- Extra JST SH cables are not included
- Requires CH340E drivers to be installed first
Best for
Makers and developers programming modern ATtiny microcontrollers
Not ideal for
Legacy AVR chips that do not use the UPDI interface
Specifications
| Item Type | Programmer |
|---|---|
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 5 × 2 cm |
What's in the box
- 1 x Adafruit High Voltage UPDI Friend USB Serial UPDI Programmer
Frequently Asked Questions
Which chips can this programmer flash?
Can I choose the operating voltage?
How much current can the 3V regulator supply?
What cable do I need to connect it to my computer?
What comes in the package?
Do I need special drivers?
Overview
The Adafruit High Voltage UPDI Friend is a small, purpose-built USB serial programmer for modern ATtiny microcontrollers. It gives you a straightforward way to connect a computer to chips such as the ATtiny816, ATtiny817 and ATtiny1616 without building a custom adapter. Everything needed for a basic connection is on the board: a USB Type C port, a CH340E USB serial converter and a JST SH connector for hooking up to a breadboard.
Because the board lets you choose between 3V and 5V power and logic, it can follow the voltage of the project you are working on rather than forcing a single level. That flexibility, plus a regulator rated for up to 500mA, makes it useful for both small prototypes and builds that draw a little more current.
Key Features
- Selectable voltage: run the board at 3V or 5V to match your target circuit.
- CH340E converter: a widely supported USB serial chip with cross-platform drivers.
- 1K loop-back resistor: fitted between the RX and TX pins to support reliable serial communication.
- USB Type C: one connector for both data and power.
- Status LEDs: a green power OK light and a red serial activity light.
- Flexible connections: 0.1 inch spaced breakout holes for custom wiring.
Specifications Explained
The 3V or 5V selection is the setting most buyers will use first. It sets both the supply and the logic level, so check what your ATtiny circuit expects before connecting. The 3V regulator can supply up to 500mA, which means the board can power a target that needs more than a trickle of current.
The CH340E handles the USB-to-serial conversion, and its cross-platform drivers make it easy to get running on a typical desktop or laptop. The 1K loop-back resistor between RX and TX is part of the board's serial arrangement and helps keep communication steady during programming. Physically, the board ships at just 0.01 kg and measures roughly 5 x 5 x 2 cm in its packaging, so it takes up almost no room on a bench or in a tool bag.
Compatibility and Requirements
The UPDI Friend is intended for modern ATtiny chips, including the ATtiny816, ATtiny817 and ATtiny1616. You will need a computer with a USB port and the appropriate CH340E drivers installed. Connection to a breadboard is made with the included JST SH cable; additional JST SH 3-pin cables with sockets or pin headers are available separately if you want spares or different ends.
Typical Uses
Use it to flash firmware onto ATtiny-based sensor nodes, small controllers and learning projects. It is equally handy for updating code during development, for classroom demonstrations and for keeping a dedicated programmer on the bench so you are not rewiring one every time.
What's in the Box
- 1 x Adafruit High Voltage UPDI Friend USB Serial UPDI Programmer
Quick specs
- Item Type
- Programmer
- Shipping Weight
- 0.01 kg
- Shipping Dimensions
- 5 × 5 × 2 cm



















