
1 / 4 · Click to enlarge
At a glance
Made by Adafruit, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name WCH CH9102F; module type USB to Serial Converter; supply voltage 3.3V / 5V. Check that your power source supplies 3.3V / 5V before connecting it.
Key Highlights
- Model No. / Name: WCH CH9102F
- Module Type: USB to Serial Converter
- Supply Voltage: 3.3V / 5V
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | WCH CH9102F |
|---|---|
| Module Type | USB to Serial Converter |
| Transmission Speed | 3 Mbit/s |
| Supply Voltage | 3.3V / 5V |
| Connector Type | USB Type-C |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 14 × 8 × 1 cm |
Overview
The Adafruit WCH CH9102F Friend - USB to Serial Converter, made by Adafruit, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: WCH CH9102F
- Module Type: USB to Serial Converter
- Transmission Speed: 3 Mbit/s
- Supply Voltage: 3.3V / 5V (match this to your power supply; too high a voltage can damage the part)
- Connector Type: USB Type-C (confirm your cable or board uses the same connector)
- Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 14 × 8 × 1 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Board features the CH9102F USB-Serial chip that can upload code at 3Mbit/s for fast development time
- It also has auto-reset for Arduino/ATmega328 boards so no noodling with pins and reset button pressings.
- Works excellently with any Arduino, ESP8266, ESP32, or any other microcontroller that uses an 'FTDI port' for communications and upload
Package Includes:
1 x Adafruit WCH CH9102F Friend - USB to Serial ConverterQuick specs
- Model No. / Name
- WCH CH9102F
- Module Type
- USB to Serial Converter
- Transmission Speed
- 3 Mbit/s
- Supply Voltage
- 3.3V / 5V
- Connector Type
- USB Type-C
- Shipping Weight
- 0.005 kg



















