
1 / 2 · Click to enlarge
At a glance
This amplifier and comparator ic is a good fit for makers, students and electronics hobbyists. Main specs: case/package LGA-7; mounting type SMD/SMT; sensor type Absolute Pressure Sensor. Check that your power source supplies 3.6 before connecting it.
Key Highlights
- Case/Package: LGA-7
- Mounting Type: SMD/SMT
- Sensor Type: Absolute Pressure Sensor
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Case/Package | LGA-7 |
|---|---|
| Mounting Type | SMD/SMT |
| Sensor Type | Absolute Pressure Sensor |
| Resolution | 16 bit |
| Interface Type | I2C |
| Output Type | Digital |
| Max. Supply Voltage (V) | 3.6 |
| Min Supply Voltage | 1.62 |
| Max. Operating Current (A) | 1 |
| Operating Temperature (°C) | -40 to 85 |
| Dimensions (L x W x H) mm | 3,73 x 3.73 x 1.22 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Overview
The BMP180 LGA-7 Digital Pressure Sensor IC is listed in our amplifier and comparator ic range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Case/Package: LGA-7
- Mounting Type: SMD/SMT
- Sensor Type: Absolute Pressure Sensor
- Resolution: 16 bit
- Interface Type: I2C (confirm your cable or board uses the same connector)
- Output Type: Digital
- Max. Supply Voltage (V): 3.6 (match this to your power supply; too high a voltage can damage the part)
- Min Supply Voltage: 1.62 (match this to your power supply; too high a voltage can damage the part)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The BMP180 Digital Pressure Sensor IC is the new digital barometric pressure sensor with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices. It follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces. The ultra-low power consumption down to 3 µA makes the BMP180 the leader in power saving for your mobile devices. BMP180 is also distinguished by its very stable behaviour (performance) with regard to the independence of the supply voltage.
Technology and specification Through its high relative accuracy of ±0.12 hPa (±1m) the BMP180 has become the most reliable sensor for precise applications, like indoor-navigation. The small size of 3.6 x 3.8 mm2 and the height of only 0.93 mm makes it very suitable for the implementation in small mobile devices. The high absolute accuracy and a noise level down to 0.02 hPa (altitude of 17 cm) open new perspectives for applications in the sports devices.
The BMP180 is a sensor based on piezo-resistive MEMS technology for EMC robustness and high-quality standards. The dies of the BMP180 are protected by a stable and thin LGA package with a metal lid. The IC has seven optimized pins. The BMP180 can communicate directly with a microcontroller in the device through I2C or SPI as a variant. BMP180 target applications Indoor navigation GPS-enhancement for dead-reckoning, slope.
Typical applications:
- Enhancement of GPS navigation (dead-reckoning, slope detection, etc.)
- In- and outdoor navigation
- Leisure and sports
- Weather forecast
- Vertical velocity indication (rise/sink speed)
Package Includes:
1 x BMP180 Digital Pressure Sensor IC
Note: Image may vary from actual product in terms of Manufacturer/Brand name according to the availability.
Quick specs
- Case/Package
- LGA-7
- Mounting Type
- SMD/SMT
- Sensor Type
- Absolute Pressure Sensor
- Resolution
- 16 bit
- Interface Type
- I2C
- Output Type
- Digital

















