
At a glance
This drivers and interfaces ic is a good fit for makers, students and electronics hobbyists. Main specs: manufacturer Generic; case/package TO 92 3; mounting type Through Hole. Check that your power source supplies 30 before connecting it.
Key Highlights
- Manufacturer: Generic
- Case/Package: TO 92 3
- Mounting Type: Through Hole
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Manufacturer | Generic |
|---|---|
| Case/Package | TO 92 3 |
| Mounting Type | Through Hole |
| Sensor Type | Temperature Sensor |
| Output Type | Analog Voltage |
| Max. Supply Voltage (V) | 30 |
| Min Supply Voltage | 4 |
| Operating Temperature (°C) | -55 to 150 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Overview
The LM35 TO-92-3 Board Mount Temperature Sensors is listed in our drivers and interfaces ic range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Manufacturer: Generic
- Case/Package: TO 92 3
- Mounting Type: Through Hole
- Sensor Type: Temperature Sensor
- Output Type: Analog Voltage (match this to your power supply; too high a voltage can damage the part)
- Max. Supply Voltage (V): 30 (match this to your power supply; too high a voltage can damage the part)
- Min Supply Voltage: 4 (match this to your power supply; too high a voltage can damage the part)
- Operating Temperature (°C): -55 to 150
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
LM35 is an integrated analog temperature sensor whose electrical output is proportional to Degree Centigrade. LM35 Sensor does not require any external calibration or trimming to provide typical accuracies. The LM35’s low output impedance, linear output, and precise inherent calibration make interfacing to readout or control circuitry especially easy.
As such no extra components required to interface LM35 to ADC as the output of LM35 is linear with 10mv/degree scale. It can be directly interfaced to any 10 or 12 bit ADC. But if you are using an 8-bit ADC like ADC0808 or ADC0804 an amplifier section will be needed if you require to measure 1°C change.
LM35 can also be directly connected to Arduino. The output of LM35 temperature can also be given to comparator circuit and can be used for over temperature indication or by using a simple relay can be used as a temperature controller.
The LM35 device is rated to operate over a −55°C to 150°C temperature range, while the LM35C device is rated for a −40°C to 110°C range (−10° with improved accuracy). The LM35-series devices are available packaged in hermetic TO transistor packages, while the LM35C, LM35CA, and LM35D devices are available in the plastic TO-92 transistor package. The LM35D device is available in an 8-lead surface-mount small-outline package and a plastic TO-220 package. For more technical details, please refer the datasheet provided in the attachments.Features:
- Calibrated directly in Degree Celsius (Centigrade)
- Linear at 10.0 mV/°C scale factor
- 0.5°C accuracy guarantee-able (at a25°C)
- Suitable for remote applications
- Low cost due to wafer-level trimming
- Operates from 4 to 30 volts
- Less than 60 mA current drain
- Low self-heating, 0.08°C in still air
- Non-linearity only 0.25°C typical
- Low impedance output, 0.1Ωfor 1 mA load
Package Includes:
1 x LM35 TO-92-3 Board Mount Temperature Sensor IC.Quick specs
- Manufacturer
- Generic
- Case/Package
- TO 92 3
- Mounting Type
- Through Hole
- Sensor Type
- Temperature Sensor
- Output Type
- Analog Voltage
- Max. Supply Voltage (V)
- 30

















