Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 12-36V, 15A brushless motor driver board for 3-phase sensorless motors, offering PWM or analog speed control and up to 500W drive power. Built-in overload, locked-rotor, and over-current protection make it a practical choice for custom motor projects.

Key Highlights

  • 12-36V DC input with 15A current rating
  • Up to 500W drive power depending on voltage
  • Analog 0-5V or PWM speed control
  • Forward and reverse direction control
  • Overload, locked-rotor, and over-current protection
  • Compact 63 x 42.5 mm bare board, 30 g

Ideal For

  • RC hobbyists building custom motor setups
  • DIY drone and robotics enthusiasts
  • Engineers prototyping sensorless brushless motor control
  • Makers needing compact PWM speed regulation
  • Automation projects requiring direction and speed control

Buying Tip

Before purchasing, confirm that your motor is a 3-phase sensorless brushless type and that its voltage and power ratings fall within the 12-36V and 500W limits of this board.

Elecvora expert review

Our verdict

This board offers a cost-effective way to drive 3-phase sensorless brushless motors with flexible speed and direction control, but it requires careful setup and tuning. It is best suited for experienced users who can manage heat and polarity protection externally.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 12-36V input range
  • Dual analog/PWM speed control
  • Built-in overload and locked-rotor protection
  • Compact and lightweight design

Cons

  • Bare board requires external heatsink for higher power
  • No reverse-polarity protection
  • May need tuning for specific motors

Best for

DIY electronics projects and custom motor builds

Not ideal for

Plug-and-play applications or beginners without soldering skills

Specifications

Item TypePWM Speed Regulator
Current Rating (A)15
Voltage Rating (V)12 to 36
Current Capacity (A)15
Power Capacity (W)500
Length (mm)63
Width (mm)42.5
Weight (g)30
Shipping Weight0.033 kg
Shipping Dimensions10 × 6 × 2 cm

Frequently Asked Questions

What type of motor is this controller compatible with?
It is designed for 3-phase brushless sensorless motors, but not all such motors work perfectly without adjustment. You may need to tune the board's resistance and capacitance for optimal performance.
What is the maximum power this board can handle?
The board can handle up to 500W of drive power, depending on the working voltage. Ensure your motor's power does not exceed this rating.
How do I control the speed?
You can use an analog voltage between 0.1V and 5V on the VR pin, or a PWM signal (1-20 kHz, 0-100% duty cycle) from a microcontroller.
Does it come with a heatsink?
No, the board is a bare board without a heatsink. For motors above 100W, you must add a heatsink to prevent overheating.
What happens if I connect the power backwards?
The board has no reverse-polarity protection, so connecting power backwards will permanently damage it. Always double-check polarity before powering up.
What is included in the package?
The package contents are not specified by the manufacturer. Please refer to the product listing for details on what is included.

Overview

This brushless motor controller is a bare-board PWM driver intended for 3-phase sensorless brushless motors. It operates from a DC supply between 12V and 36V and can deliver up to 15A, supporting a maximum drive power of 500W (depending on the working voltage). The board measures 63 mm by 42.5 mm and weighs just 30 g, so it fits easily into tight enclosures and weight-sensitive builds. Speed regulation is flexible: you can use an analog voltage from 0.1V to 5V on the VR pin or feed a PWM signal (1-20 kHz, 0-100% duty cycle) from a microcontroller. A separate control port lets you toggle rotation direction by applying a high or low level. The board includes overload, locked-rotor, and over-current protection, and it operates over a wide temperature range of -40 to +85°C.

Key Features

  • Wide voltage range: Works with 12V to 36V DC supplies, covering many common battery and bench power setups.
  • 15A current capacity: Suitable for motors that draw up to 15A continuously, with 500W maximum drive power.
  • Dual speed control: Accepts analog voltage (0.1-5V) or PWM (1-20 kHz) for precise speed adjustment.
  • Direction control: Dedicated Z/F pin lets you switch between forward and reverse rotation.
  • Protection circuitry: Overload, locked-rotor, and over-current protection help safeguard the board and motor.
  • Compact and lightweight: 63 x 42.5 mm board weighs only 30 g, ideal for space-constrained projects.

Specifications Explained

Voltage (12-36V): The board accepts a DC input in this range. Make sure your power supply or battery voltage stays within these limits; exceeding 36V may damage the board.

Current (15A): This is the maximum current the board is rated to handle. The actual current draw depends on the motor and load. For motors above 100W, a heatsink must be added to manage heat.

Power (500W): The maximum drive power is 500W, but this is related to the working voltage. Ensure your motor's power does not exceed this rating.

Speed control: The VR pin accepts an analog voltage from 0.1V to 5V for linear speed control. Alternatively, connect a PWM signal (1-20 kHz, 0-100% duty) to the VR pin with GND for microcontroller-based speed regulation.

Control port: The Z/F pin controls direction: connect to 5V or leave unconnected for forward; connect to 0V or GND for reverse. The 5V pin provides an internal 5V output, and the Signal pin outputs a 5V pulse signal for motor speed feedback.

Dimensions and weight: The board is 63 mm long, 42.5 mm wide, and weighs 30 g, making it easy to mount in compact spaces.

Compatibility and Requirements

This controller is designed for 3-phase brushless sensorless motors, but it may not work perfectly with every such motor out of the box. If you experience starting jitter, reversing, excessive no-load current, unstable speed, low efficiency, or failure to start under load, you can adjust the resistance and capacitance on the board to suit your motor. The board is a bare board without a housing or heatsink. For motors below 60W, no heatsink is required as long as there is normal ventilation and wall insulation. For motors above 100W, a heatsink must be added. The board has no reverse-polarity protection; connecting power backwards will permanently damage it. Use shielded wires if the distance between the board and motor exceeds 50 cm. The 5V output port should not be connected to external loads that exceed its capacity.

Typical Uses

This driver board is suitable for a wide range of projects involving 3-phase sensorless brushless motors, including RC models, DIY drones, robotics, automated machinery, and custom motor test rigs. It is particularly useful when you need variable speed control and direction switching in a compact package. Makers and engineers can integrate it into prototypes or small-scale production where a bare-board driver is acceptable.

What's in the Box

Package contents are not specified by the manufacturer. Please check the product listing for details on what is included.

wiring diagram

Quick specs

Item Type
PWM Speed Regulator
Current Rating (A)
15
Voltage Rating (V)
12 to 36
Current Capacity (A)
15
Power Capacity (W)
500
Length (mm)
63
See all specifications