
1 / 4 · Click to enlarge
AI Summary
This PWM speed controller regulates brushed DC motors from 6V to 90V and up to 15A, with adjustable 0-100% speed via potentiometer or external 0-5V signal. Its wide voltage range and 1000W capacity make it a versatile solution for fans, pumps, and DIY projects.
Key Highlights
- Wide 6V-90V DC input for diverse motor applications
- 15A max current and 1000W power handling
- 0-100% PWM adjustment via potentiometer or 0-5V signal
- 16kHz PWM frequency for smooth, quiet motor operation
- Compact 60x63mm board with low 0.005A standby current
- Supports PLC control for automated systems
Ideal For
- Makers and hobbyists building custom motorized projects
- Engineers needing precise speed control for DC fans or pumps
- Automation enthusiasts integrating PLC-controlled systems
- DIY robotics builders using brushed DC motors
- Model makers requiring compact speed regulation
Buying Tip
Check that your motor's voltage and current draw fall within the 6-90V and 15A limits, and remember this controller is not for brushless motors.
Elecvora expert review
Our verdict
This PWM governor offers a practical solution for brushed DC motor speed control with a wide voltage range and decent current capacity. It is straightforward to use and supports external control, though users must be careful with polarity and current limits.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 6-90V range suits many motors
- Supports external 0-5V control for automation
- Compact and lightweight design
- Low standby current
- Simple potentiometer adjustment
Cons
- Not compatible with brushless motors
- Continuous current limited to 8A
- Requires removal of potentiometer for external control
Best for
Brushed DC motor speed control in DIY and automation projects
Not ideal for
Brushless motors or applications exceeding 15A peak current
Specifications
| Item Type | PWM Speed Regulator |
|---|---|
| Current Rating (A) | 15 |
| Voltage Rating (V) | 6 to 90 |
| Operating Voltage (VDC) | 6 ~ 90 |
| Max. Operating Current (A) | 8A |
| Max Current (A) | 15A |
| Additional Specs. | Controlled Power: 0.01-1000W |
| Static Current | 0.005A (Standby) |
| PWM Range (%) | 0%-100% |
| PWM frequency | 16KHZ |
| Length (mm) | 60 |
| Width (mm) | 63 |
| Weight (g) | 77 |
| Shipping Weight | 0.078 kg |
| Shipping Dimensions | 11 × 11 × 4 cm |
What's in the box
- 1 x DC Motor Speed Controller
- 1 x Potentiometer with connector
Frequently Asked Questions
Can I use this speed controller with a brushless motor?
What is the maximum continuous current this controller can handle?
How do I connect an external 0-5V control signal?
What is included in the package?
What should I do if the motor spins in the wrong direction?
Can I use this controller with a power supply voltage below 6V?
Overview
The Generic DC Motor Governor is a PWM-based speed control switch designed to regulate the speed of brushed DC motors. It accepts a wide input voltage range of 6V to 90V and can handle up to 15A of current, making it suitable for motors with power ratings up to 1000W. Speed adjustment is simple: turn the onboard potentiometer or connect an external 0-5V DC control signal for remote or automated control. The module is compact and lightweight, easily fitting into custom projects or control panels.
Key Features
- Wide voltage range: Operates from 6V to 90V DC, covering many common motor voltages.
- High current capacity: Supports up to 15A maximum current (8A continuous) for demanding applications.
- Flexible speed control: Adjust speed from 0% to 100% using the potentiometer or an external 0-5V signal.
- Stable PWM output: 16kHz frequency ensures smooth, low-noise motor operation.
- Low standby current: Draws only 0.005A when idle, conserving power.
- PLC compatible: Can be controlled by external 0-5V signals from PLCs or microcontrollers.
Specifications Explained
Voltage Rating (6-90V): This is the DC input range the regulator can accept. Ensure your motor's operating voltage falls within this range. Current Rating (15A max, 8A continuous): The regulator can handle brief surges up to 15A, but continuous operation should not exceed 8A to avoid overheating. PWM Frequency (16kHz): A higher PWM frequency like 16kHz reduces audible noise and provides smoother speed transitions compared to lower frequencies. Controlled Power (0.01-1000W): The module can manage motors with power ratings from 0.01W up to 1000W, giving you flexibility across small and large motors.
Compatibility and Requirements
This governor is designed for brushed DC motors only. It is not compatible with brushless motors. The motor can be connected with either polarity; if the direction is reversed, simply swap the motor wires. The power supply polarity must be correct—reversing positive and negative will damage the unit. For external control, a 0-5V DC signal is required, and the potentiometer must be removed as described in the setup guide.
Typical Uses
Use this speed controller for applications such as cooling fans, pumps, conveyor belts, and DIY motorized projects. It is also suitable for robotics, model making, and any system requiring adjustable brushed DC motor speed.
What's in the Box
Package includes: 1 x DC Motor Speed Controller and 1 x Potentiometer with connector.

Quick specs
- Item Type
- PWM Speed Regulator
- Current Rating (A)
- 15
- Voltage Rating (V)
- 6 to 90
- Operating Voltage (VDC)
- 6 ~ 90
- Max. Operating Current (A)
- 8A
- Max Current (A)
- 15A













