
1 / 4 · Click to enlarge
AI Summary
A compact 9DOF IMU breakout combining the Bosch BMI323 accelerometer/gyroscope with the BMM350 magnetometer for precise motion and orientation sensing over I2C. Built-in hardware algorithms and a 2048-byte FIFO reduce host workload while enabling step counting, tap detection, and activity classification.
Key Highlights
- Bosch BMI323 6-axis IMU plus BMM350 3-axis magnetometer
- Hardware motion algorithms for steps, taps, tilt, and free-fall
- 2048-byte FIFO buffer for stable high-speed data capture
- Selectable sleep, low-power, normal, and high-performance modes
- I2C interface with SH1.0-5P connector and 2.54mm pin headers
- On-chip temperature compensation and low-noise architecture
Ideal For
- Embedded developers building motion-sensing prototypes
- Robotics hobbyists needing 9DOF orientation data
- Wearable device makers requiring low-power operation
- Students learning I2C sensor integration
- Makers adding activity or tap detection to projects
Buying Tip
Confirm your host board uses 3.3 V logic and that you have the correct SH1.0-5P cable or plan to solder the included pin header before ordering.
Elecvora expert review
Our verdict
This breakout packs a capable 9DOF sensor set with useful hardware algorithms and a FIFO buffer into a very small board. It is a solid choice for embedded developers who want reliable motion data without writing complex processing code.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Combines accelerometer, gyroscope, and magnetometer in one module
- Hardware motion algorithms offload work from the host controller
- Low power consumption suits battery-powered designs
- Flexible I2C addressing and multiple interrupt pins
Cons
- Requires 3.3 V logic, which may need level shifting on 5 V boards
- Package contents are not specified, so accessories may be missing
- Magnetometer performance can be affected by nearby magnetic interference
Best for
Embedded developers and makers building compact motion-sensing devices
Not ideal for
Users needing a ready-to-use enclosure or 5 V direct compatibility
Specifications
| Shipping Weight | 0.015 kg |
|---|---|
| Shipping Dimensions | 8 × 08 × 3.0 cm |
Frequently Asked Questions
What is the operating voltage of this sensor?
Which platforms are compatible?
What are the default I2C addresses?
Does it include a cable or header?
Can it run motion detection without host processing?
How much current does it draw?
Overview
The DFRobot Fermion BMI323 + BMM350 9DOF IMU Sensor is a compact breakout board designed for accurate nine-axis motion tracking. It combines the Bosch BMI323 six-axis IMU, which contains a 3-axis accelerometer and a 3-axis gyroscope, with the Bosch BMM350 3-axis magnetometer. Together they provide the acceleration, angular rate, and magnetic field data needed for orientation and motion sensing in embedded projects.
The module communicates over I2C and works with popular platforms including Arduino, Raspberry Pi, and ESP32. Both an SH1.0-5P connector and a 2.54mm pin header are provided, giving you flexible options for wiring the board into a prototype or a finished build.
Key Features
- Complete 9DOF sensing: 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer on one board.
- Hardware motion algorithms: step counting, tap detection, tilt sensing, free-fall recognition, and activity classification run on the sensor itself, reducing host controller workload.
- 2048-byte FIFO buffer: helps maintain stable data output during high-speed sampling.
- Low-noise architecture with on-chip temperature compensation: supports consistent readings across changing conditions.
- Configurable power modes: Sleep, Low Power, Normal, and High Performance settings let you balance consumption and data rate.
- Programmable interrupt pins: three interrupt pins are available for event-driven designs.
Specifications Explained
The accelerometer offers selectable ranges of ±2g, ±4g, ±8g, and ±16g with 16-bit resolution, so you can choose sensitivity to suit everything from gentle tilt sensing to higher-impact motion. The gyroscope provides ranges from ±125 to ±2000 °/s, also at 16-bit resolution, covering slow rotation and fast spins alike. Output data rates for the accelerometer span 0.78125 Hz to 6400 Hz, giving you fine control over sample timing.
The BMM350 magnetometer adds the third axis needed for absolute heading reference. The board runs from a 3.3 V supply and draws 0.92 mA in normal operation or 0.37 mA in low-power mode, making it practical for battery-powered devices. Default I2C addresses are 0x69 for the BMI323 and 0x15 for the BMM350, with alternate addresses available for each.
Compatibility and Requirements
The sensor is intended for 3.3 V logic and communicates over I2C. It is compatible with Arduino, Raspberry Pi, and ESP32 platforms. You will need a host microcontroller or single-board computer with an available I2C bus and a 3.3 V power source. The SH1.0-5P connector and 2.54mm pin header allow connection by cable or direct soldering to a breakout or PCB.
Typical Uses
- Robotics and motion control systems
- Navigation and orientation sensing
- Wearable devices and activity monitoring
- Step counting and tap-based user interfaces
- Tilt sensing and free-fall detection
What's in the Box
Package contents are not specified in the available product data. Please check the product listing or contact the seller for details on included accessories.



















