
1 / 4 · Click to enlarge
At a glance
Made by DFRobot, this imu, accelerometer, magnetometer and gyroscope is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.015 kg.
Key Highlights
- Shipping Weight: 0.015 kg
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Shipping Weight | 0.015 kg |
|---|---|
| Shipping Dimensions | 8 × 08 × 3 cm |
Overview
The DFRobot Fermion: BMI323+BMM350+BMP581 10DOF IMU Sensor (I2C, Breakout), made by DFRobot, is listed in our imu, accelerometer, magnetometer and gyroscope range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 8 × 08 × 3 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The DFRobot Fermion: BMI323+BMM350+BMP581 10DOF IMU Sensor (I2C, Breakout) delivers accurate motion, orientation, heading, and altitude measurement in a compact embedded module. It integrates the Bosch BMI323 6-axis IMU, BMM350 3-axis magnetometer, and BMP581 high-precision barometric pressure sensor, providing reliable data through a native I²C interface. Built-in hardware motion algorithms enable functions such as step counting, tap, tilt, free-fall, and activity recognition without increasing host processor workload. Multiple operating modes help optimize power consumption, while the compact PCB simplifies embedded integration. The module supports Arduino, Raspberry Pi, and ESP32 with available development libraries, making project development faster. It is suitable for drones, robotics, wearable electronics, electronic compass systems, indoor navigation, altitude monitoring, and miniature device attitude sensing requiring stable and precise environmental and motion data.
Features:
- Bosch BMI323 6-axis IMU, BMM350 magnetometer, and BMP581 barometric sensor
- High-accuracy motion, heading, and altitude measurement
- Built-in hardware motion algorithms for intelligent sensing
- Integrated 2 KB FIFO buffer for efficient data transfer
- Supports Sleep, Low Power, Normal, and High Performance modes
- Native I²C interface with soldered or plug-in connection options
- Compatible with Arduino, Raspberry Pi, and ESP32
- Compact 24 × 19 mm PCB for embedded integration
Useful Link: Fermion: BMI323 BMM350 BMP581 10 DOF IMU Sensor wiki
Specifications:
- Product Type: 10DOF IMU Sensor
- Sensor Combination: Bosch BMI323 + Bosch BMM350 + Bosch BMP581
- Motion Sensors: 3-axis Accelerometer + 3-axis Gyroscope
- Magnetometer: 3-axis BMM350
- Barometric Sensor: BMP581
- Operating Voltage: 3.3 V
- Operating Current: 1.12 mA
- Low Power Current: 0.37 mA
- Communication Interface: I²C
- Connector Type: SH1.0-5P Connector / 2.54 mm Pin Header Holes
- BMI323 I²C Address: 0x69 (Default), 0x68
- BMM350 I²C Address: 0x15 (Default), 0x14
- BMP581 I²C Address: 0x47 (Default), 0x46
- Programmable Interrupt Pins: 4
- Accelerometer Range: ±2g, ±4g, ±8g, ±16g
- Accelerometer Resolution: 16-bit
- Accelerometer ODR: 12.5 Hz – 6400 Hz (High Performance/Normal), 0.78125 Hz – 400 Hz (Low Power)
- Gyroscope Range: ±125, ±250, ±500, ±1000, ±2000 °/s
- Gyroscope Resolution: 16-bit
- Gyroscope ODR: 12.5 Hz – 6400 Hz (High Performance/Normal), 0.78125 Hz – 400 Hz (Low Power)
- Magnetometer Range: ±2000 µT
- Magnetometer Resolution: Approx. 0.1 µT
- Magnetometer Maximum Sampling Rate: 400 Hz
- Pressure Measurement Range: 30 kPa – 125 kPa
- Pressure Resolution: Approx. 0.0156 Pa
- Pressure Relative Accuracy: Typical ±6 Pa
- Temperature Measurement Range: -40°C to +85°C
- Temperature Accuracy: ±0.5 K
- Pressure ODR: 0.125 Hz – 240 Hz
- PCB Size: 24 × 19 mm
- Mounting Hole Spacing: 19 mm
- Mounting Hole Diameter: 2 mm
- Mounting Type: Through-Hole Mount
- Weight: 4g
Applications:
- Drone heading and altitude control
- Indoor inertial navigation
- Robot localization
- Electronic compass
- Altitude monitoring
- Wearable devices
- Motion controllers
- Miniature device attitude monitoring
Package Includes:
1 x Fermion: BMI323+BMM350+BMP581 High Precision 10 DOF IMU Sensor
1 x SH1.0-5P Sensor Cable
1 x 2.54 mm Black Single Row Pin Header – 10-Pin



















