
1 / 3 · Click to enlarge
AI Summary
The DFRobot Fermion BMP585 is a compact barometric pressure and temperature sensor with ±0.3 hPa accuracy and I2C, SPI, and I3C interfaces. Its gel-filled cavity and ultra-low noise make it reliable for drones, wearables, and IoT weather monitoring.
Key Highlights
- Bosch BMP585 MEMS sensor with ±0.3 hPa absolute accuracy
- Ultra-low noise below 0.1 Pa RMS for precise altitude data
- Supports I2C, SPI, and I3C communication interfaces
- Gel-filled cavity resists water, humidity, and chemicals
- Low power: 200 µA active, 2 µA sleep current
- Compact 1.8 cm × 1.5 cm Fermion PCB with 2.54 mm header
Ideal For
- Drone and RC pilots needing precise altitude data
- Wearable developers building environmental sensing
- IoT enthusiasts creating weather stations
- Makers requiring a compact, robust pressure sensor
- Engineers working on altimetry or navigation projects
Buying Tip
Check that your microcontroller supports I2C, SPI, or I3C and can supply 1.7–3.6 V; the sensor’s accuracy benefits from a stable power source and proper decoupling.
Elecvora expert review
Our verdict
The DFRobot Fermion BMP585 combines high accuracy, ultra-low noise, and robust protection in a tiny module, making it a strong choice for demanding pressure-sensing applications. Its multiple interfaces and low power draw add flexibility for both portable and fixed installations.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- ±0.3 hPa accuracy and <0.1 Pa RMS noise for precise measurements
- Gel-filled cavity protects against water, humidity, and chemicals
- Supports I2C, SPI, and I3C for versatile integration
- Very low sleep current (~2 µA) suits battery-powered devices
Cons
- Requires soldering the header for breadboard use
- No onboard voltage regulator, so supply must be within 1.7–3.6 V
- Documentation for advanced features must be sourced from the Bosch datasheet
Best for
Engineers and makers needing a compact, accurate, and durable pressure sensor for drones, wearables, or IoT weather stations.
Not ideal for
Users who need a pre-soldered, plug-and-play module or who require pressure ranges beyond 30–125 kPa.
Specifications
| Pressure Type | Absolute |
|---|---|
| Pressure Range | 30 kPa to 125 kPa |
| Sensor Type | MEMS digital barometric and temperature sensor |
| Output Type | I2C/SPI/I3C |
| Supply Voltage | 1.7 V-3.6 V |
| Accuracy | +/-0.3 hPa |
| Application | Altimeters and drones and wearables and IoT weather |
| Chip | Bosch BMP585 MEMS |
| Sleep Current (uA) | ~ 2 |
| Interface form | 2.54 mm Pin Header |
| Length | 1.8 cm |
| Width | 1.5 cm |
| Weight (Kg) | 0.005 kg |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 6 × 6 × 3 cm |
What's in the box
- 1 x DFRobot Fermion: BMP585 High-Precision Barometric Pressure and Temperature Sensor
- 1 x Header Pin
Frequently Asked Questions
What is the pressure range of this sensor?
Which communication interfaces does the module support?
What is the supply voltage requirement?
Is the sensor protected against moisture?
What is included in the package?
How much current does it draw?
Overview
The DFRobot Fermion: BMP585 is a high-precision barometric pressure and temperature sensor module designed for applications that demand accurate atmospheric data in a small footprint. It uses the Bosch BMP585 MEMS sensor, which provides absolute pressure measurements from 30 kPa to 125 kPa with an accuracy of ±0.3 hPa. The module also features ultra-low noise performance below 0.1 Pa RMS, enabling detection of very small pressure changes. A gel-filled protective cavity enhances resistance to water, humidity, and chemicals, making the sensor suitable for use in challenging environments. The Fermion form factor measures just 1.8 cm by 1.5 cm and includes a 2.54 mm pin header for easy connection to breadboards or custom PCBs.
Key Features
- High accuracy: ±0.3 hPa absolute pressure accuracy for reliable altitude and weather measurements.
- Ultra-low noise: Below 0.1 Pa RMS, allowing detection of minute pressure variations.
- Multiple interfaces: I2C, SPI, and I3C support for flexible integration with different microcontrollers.
- Robust protection: Gel-filled cavity resists water, humidity, and chemical exposure.
- Low power consumption: 200 µA active current and approximately 2 µA sleep current, ideal for battery-powered devices.
- Built-in FIFO and IIR filter: Reduces MCU workload and provides stable, high-resolution data.
Specifications Explained
Pressure range (30 kPa to 125 kPa): This range covers typical atmospheric pressures from sea level to high altitudes, making the sensor suitable for altimetry and environmental monitoring.
Accuracy (±0.3 hPa): A pressure difference of 0.3 hPa corresponds to roughly 2.5 meters of altitude change at sea level, so this accuracy supports precise altitude estimation.
Supply voltage (1.7 V to 3.6 V): The wide operating voltage range allows direct connection to common 3.3 V logic systems and low-power battery setups.
Interfaces (I2C, SPI, I3C): Multiple communication options give you flexibility in choosing the best interface for your project’s speed and pin availability.
Sleep current (~2 µA): Extremely low sleep current helps extend battery life in portable and wearable applications.
Compatibility and Requirements
The module is designed for microcontrollers and development boards that support I2C, SPI, or I3C communication and can operate at 1.7 V to 3.6 V. It comes with a 2.54 mm pin header that can be soldered for breadboard or PCB mounting. No additional libraries or drivers are specified, but you will need to consult the Bosch BMP585 datasheet for register-level details. The sensor requires a stable power supply within the stated voltage range.
Typical Uses
- Altitude measurement in drones and RC aircraft
- Wearable devices requiring environmental sensing
- IoT weather stations and environmental monitoring
- Altimeters and pressure-based navigation
- Industrial or outdoor applications where humidity and chemical resistance are beneficial
What's in the Box
- 1 x DFRobot Fermion: BMP585 High-Precision Barometric Pressure and Temperature Sensor
- 1 x Header Pin
Quick specs
- Pressure Type
- Absolute
- Pressure Range
- 30 kPa to 125 kPa
- Sensor Type
- MEMS digital barometric and temperature sensor
- Output Type
- I2C/SPI/I3C
- Supply Voltage
- 1.7 V-3.6 V
- Accuracy
- +/-0.3 hPa



















