
1 / 4 · Click to enlarge
At a glance
Made by DFRobot, this imu, accelerometer, magnetometer and gyroscope is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.015 kg.
Key Highlights
- Shipping Weight: 0.015 kg
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Shipping Weight | 0.015 kg |
|---|---|
| Shipping Dimensions | 8 × 08 × 3.0 cm |
Overview
The DFRobot Gravity: BMI323 6DOF IMU Sensor (I2C / UART, Plug & Play), made by DFRobot, is listed in our imu, accelerometer, magnetometer and gyroscope range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 8 × 08 × 3.0 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The DFRobot Gravity: BMI323 6DOF IMU Sensor is a high-performance motion sensing module based on the Bosch BMI323 IMU, combining a 3-axis accelerometer and a 3-axis gyroscope for accurate motion and orientation detection. It supports advanced onboard motion algorithms including step counting, tap detection, tilt detection, free-fall detection, and activity recognition, reducing the need for complex host-side processing. With support for both I²C and UART communication, selectable I²C addresses, and Gravity plug-and-play connectivity, it enables quick integration with Arduino, Raspberry Pi, ESP32, and other embedded platforms. The integrated 2048-byte FIFO buffer ensures reliable high-speed data transfer, while multiple power modes help optimize energy consumption. Its GUI visualization software further simplifies sensor testing and development, making it ideal for rapid prototyping, robotics, wearables, and IoT motion sensing applications.


Features:
- Bosch BMI323 high-performance 6-axis IMU
- 3-axis accelerometer and 3-axis gyroscope
- Built-in step, tap, tilt, free-fall and activity detection
- Supports I²C and UART communication
- Integrated 2048-byte FIFO data buffer
- Four selectable I²C addresses
- Multiple operating modes for power optimisation
- Compatible with Arduino, ESP32 and Raspberry Pi
Useful Link: https://wiki.dfrobot.com/sen0692/
Specifications:
- Product Type: 6DOF IMU Sensor
- IMU Chip: Bosch BMI323
- Motion Sensors: 3-axis Accelerometer + 3-axis Gyroscope
- Operating Voltage: DC 3.3–5V
- Operating Current: 3.1mA
- Communication Interface: I²C / UART
- Connector Type: PH2.0-4P (Gravity) / 2.54mm Pin Header
- I²C Address: 0x4A (Default), 0x4B, 0x4C, 0x4D
- Programmable Interrupt Pins: 2
- Accelerometer Resolution: 16-bit
- Accelerometer Range: ±2g, ±4g, ±8g, ±16g
- Accelerometer Sensitivity: 16384, 8192, 4096, 2048 LSB/g
- Accelerometer Sensitivity Error: ±0.5%
- Zero-g Offset: ±50mg
- Accelerometer Output Data Rate: 12.5Hz–6400Hz (High Performance/Normal), 0.78125Hz–400Hz (Low Power)
- Gyroscope Resolution: 16-bit
- Gyroscope Range: ±125, ±250, ±500, ±1000, ±2000°/s
- Gyroscope Sensitivity: 16.384–131.072 LSB/(°/s)
- Gyroscope Sensitivity Error: ±3% (Without Self-Calibration), ±0.7% (After Self-Calibration)
- Zero-Rate Offset: ±1°/s
- Gyroscope Output Data Rate: 12.5Hz–6400Hz (High Performance/Normal), 0.78125Hz–400Hz (Low Power)
- FIFO Buffer: 2048 Bytes
- Motion Detection: Step Counting, Tap Detection, Tilt Detection, Free-Fall Detection, Activity Recognition
- Operating Modes: Sleep, Low Power, Normal, High Performance
- GUI Support: Yes
- PCB Size: 32 × 27mm
- Mounting Type: Through-Hole Mount
- Mounting Hole Spacing: 20mm
- Mounting Hole Diameter: 3.1mm
- Weight: 5g
Applications:
- Gesture-Controlled Devices
- Wearable Motion Detection
- Robotics Motion Feedback
- IoT Motion Wake-Up
- Motion Event Detection
- Embedded Motion Sensing
- Smart Interactive Projects
Package Includes:
1 x DFRobot Gravity: BMI323 6DOF IMU Sensor (I2C / UART, Plug & Play)



















