
1 / 4 · Click to enlarge
At a glance
Made by DFRobot, this imu, accelerometer, magnetometer and gyroscope is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.01 kg.
Key Highlights
- Shipping Weight: 0.01 kg
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Shipping Weight | 0.01 kg |
|---|---|
| Shipping Dimensions | 8 × 8.0 × 3 cm |
Overview
The DFRobot Gravity: BMI323+BMM350+BMP581 10DOF IMU Sensor (I2C / UART, Plug & Play), made by DFRobot, is listed in our imu, accelerometer, magnetometer and gyroscope range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 8 × 8.0 × 3 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The DFRobot Gravity: BMI323+BMM350+BMP581 10DOF IMU Sensor is a high-performance motion sensing module designed for precise orientation, motion, and altitude measurement. Combining a 6-axis IMU, 3-axis magnetometer, and high-precision barometric pressure sensor, it delivers reliable acceleration, angular velocity, magnetic heading, pressure, and altitude data in a single compact board. Built-in hardware motion algorithms support step counting, tap, tilt, free-fall, and activity recognition without increasing the host controller workload. Standard I²C and UART interfaces ensure quick plug-and-play integration with Arduino, Raspberry Pi, and ESP32 development boards. Multiple power modes, configurable measurement ranges, and high-speed output rates make it suitable for robotics, drones, wearable devices, navigation systems, and motion tracking applications. The included GUI software enables real-time sensor visualization and easy evaluation without programming.
Features:
- Bosch BMI323 6-axis IMU, BMM350 magnetometer, and BMP581 barometric sensor
- Measures acceleration, angular velocity, magnetic heading, pressure, and altitude
- Built-in motion algorithms for step counting, tap, tilt, free-fall, and activity recognition
- Integrated 2KB FIFO buffer for stable high-speed data transmission
- Supports configurable accelerometer and gyroscope measurement ranges
- Standard I²C and UART interfaces for plug-and-play connectivity
- Compatible with Arduino, Raspberry Pi, and ESP32 development boards
- GUI software with real-time 3D attitude visualization and sensor data display
Useful Link: Gravity: 10 DOF IMU Sensor wiki
Specifications:
- Sensor Type: 10DOF IMU Sensor
- IMU Chip: Bosch BMI323
- Magnetometer: Bosch BMM350
- Barometric Sensor: Bosch BMP581
- Operating Voltage: DC 3.3–5V
- Operating Current: 3.59mA
- Communication Interface: I²C / UART
- Connector Type: PH2.0-4P (Gravity), 2.54mm Pin Header
- I²C Address: 0x4A (Default), 0x4B, 0x4C, 0x4D
- Programmable Interrupt Pins: 4
- Accelerometer Resolution: 16-bit
- Accelerometer Range: ±2g, ±4g, ±8g, ±16g
- Accelerometer ODR: 0.78125Hz to 6400Hz
- Gyroscope Resolution: 16-bit
- Gyroscope Range: ±125, ±250, ±500, ±1000, ±2000°/s
- Gyroscope ODR: 0.78125Hz to 6400Hz
- Magnetometer Range: ±2000µT
- Magnetometer Resolution: Approx. 0.1µT
- Magnetometer Maximum ODR: 400Hz
- Pressure Measurement Range: 30kPa to 125kPa
- Pressure Resolution: Approx. 0.0156Pa
- Pressure ODR: 0.125Hz to 240Hz
- Temperature Measurement Range: -40°C to +85°C
- PCB Size: 32 × 27mm
- Mounting Hole Spacing: 20mm
- Mounting Hole Diameter: 3mm
- Weight: 3g
Applications:
- Indoor inertial navigation
- Drone heading control
- Robot localization and mapping
- Electronic compass systems
- Wearable motion tracking
- Gesture recognition devices
- Motion controllers
- Micro-robot attitude monitoring
Package Includes:
1 x DFRobot Gravity: BMI323+BMM350+BMP581 10DOF IMU Sensor (I2C / UART, Plug & Play)
1 x Gravity 4P Sensor Cable
1 x 2.54 mm Black Single Row Pin Header – 10-Pin



















