Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.044 kg.

Key Highlights

  • Shipping Weight: 0.044 kg

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Shipping Weight0.044 kg
Shipping Dimensions14 × 7 × 3 cm

Overview

The DFRobot Gravity: Factory Calibrated Laser Quantitative Methane Sensor for Research (Lab-Grade CH4 Data + No Code Excel Export), made by DFRobot, is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Shipping Weight: 0.044 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 14 × 7 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The DFRobot Gravity Factory Calibrated Laser Quantitative Methane Sensor is a professional-grade CH₄ sensing solution designed for researchers, environmental engineers, laboratory professionals, and academic institutions requiring accurate and quantitative methane measurements. Unlike conventional MQ-series gas sensors that provide only approximate readings, this advanced sensor utilizes Tunable Diode Laser Absorption Spectroscopy (TDLAS) technology to deliver precise methane concentration data in %LEL (Lower Explosive Limit).

Factory calibrated for immediate deployment, the sensor eliminates the need for complex calibration procedures and provides reliable, publication-ready data with excellent repeatability and long-term stability. Its zero cross-gas interference capability ensures accurate methane measurements even in environments containing CO₂, ethanol, H₂S, or other gases commonly found in fermentation systems, wastewater treatment plants, biogas facilities, and environmental research projects.


Features:

  1. Advanced TDLAS laser technology for highly selective methane detection
  2. Factory calibrated for accurate quantitative CH₄ measurements
  3. Outputs methane concentration directly in %LEL for research-grade analysis
  4. No cross-gas interference from CO₂, ethanol, H₂S, and similar gases
  5. One-click data export to Excel and MATLAB-ready formats using SCI DAQ Module
  6. Plug-and-play compatibility with Arduino, Raspberry Pi, and laboratory DAQ systems
  7. Long operational lifespan exceeding 10 years with minimal drift

Specification:

  1. Item Type : Laser Methane Gas Sensor
  2. Detection Gas : Methane (CH₄)
  3. Sensing Technology : Tunable Diode Laser Absorption Spectroscopy (TDLAS)
  4. Detection Range : 3–100% LEL
  5. Resolution : 0.1% LEL
  6. Accuracy : ±2% LEL (@5–20% LEL, 25°C)
  7. Accuracy : ±3% LEL (@20–75% LEL, 25°C)
  8. Accuracy : ±5% LEL (@75–100% LEL, 25°C)
  9. Response Time : T90 < 15 Seconds
  10. Warm-Up Time : 15 Seconds
  11. Communication Interface : I2C, UART
  12. Operating Temperature : -13°C to +58°C
  13. Operating Humidity : 0–95% RH (Non-Condensing)
  14. Operating Pressure : 80–115 kPa
  15. Calibration : Factory Calibrated
  16. Data Logging Support : Excel & MATLAB Export via SCI DAQ Module
  17. Compatibility : Arduino, Raspberry Pi, DAQ Systems
  18. Sensor Lifespan : More Than 10 Years
  19. Cross-Gas Interference : None
  20. Output Data Format : Quantitative %LEL Methane Concentration
  21. Installation Type : Plug-and-Play
  22. Diamentions : 84 x 26 x 17 mm
  23. Weight : 29 g

Pacakge Includes:

1 x DFRobot Gravity: Factory Calibrated Laser Quantitative Methane Sensor for Research (Lab-Grade CH4 Data + No Code Excel Export)

1 x Gravity 4 pin sensor cable

Quick specs

Shipping Weight
0.044 kg
Shipping Dimensions
14 × 7 × 3 cm
See all specifications