Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this boards compatible with arduino is a good fit for makers, students and electronics hobbyists. Main specs: item type Development Board; board type Gravity; chip type GP8302. Check that your power source supplies 18V-24V (24V recommended) before connecting it.

Key Highlights

  • Item Type: Development Board
  • Board Type: Gravity
  • Chip Type: GP8302

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeDevelopment Board
Board TypeGravity
Chip TypeGP8302
Model No. / NameI2C 4-20mA
Input signal12Bit, 0x000-0xFFF (0-25mA)
Input I2C Signal High Level2.7V-5V
Power Supply Voltage (V)18V-24V (24V recommended)
Accuracy0.5% before calibration, 0.2% after calibration
Power Consumption (W)<5mA
Start-up Time<2ms
Operating Temperature (°C)-40°C to 125°C
Load ResistanceMaximum 450Ω load capacity for 18V power supply, maximum 750Ω for 24V
Max. Operating Current (A)0-25mA
I2C Address0x58
Shipping Weight0.018 kg
Shipping Dimensions6 × 6 × 3 cm

Overview

The DFRobot Gravity: I2C 4-20mA DAC Module (Arduino Compatible), made by DFRobot, is listed in our boards compatible with arduino range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Development Board
  • Board Type: Gravity
  • Chip Type: GP8302
  • Model No. / Name: I2C 4-20mA
  • Input signal: 12Bit, 0x000-0xFFF (0-25mA)
  • Input I2C Signal High Level: 2.7V-5V
  • Power Supply Voltage (V): 18V-24V (24V recommended) (match this to your power supply; too high a voltage can damage the part)
  • Accuracy: 0.5% before calibration, 0.2% after calibration

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is DFRobot Gravity: I2C 4-20mA DAC Module (Arduino Compatible). This is an I2C DAC module that outputs 0-25mA current. It offers more accurate 4-20mA current output after calibration, which can be used with most 4-20mA devices on market such as motors, inverters, valves, pumps, etc., by Arduino programming.
Applications:
  1. Intelligent function signal generator.
  2. Automatic controller for lighting or fountain.
  3. The automatic and quick transformation of small equipment.
  4. Automatic debugger for electromechanical equipment.
  5. Transformation of small test equipment.

Features:

  1. I2C signal input, linearly converted to 0-25mA analog current output.
  2. With Gravity interface, support the Arduino library, and can be used for program automation control.
  3. Configuration can be saved when powered off, and the saved value remains after restarting.

Useful link:

To do Hardware and Software setup, please follow this tutorial.

Package Includes:

1 x Gravity: I2C 4-20mA DAC Module (Arduino Compatible)

1 x Gravity I2C/UART Sensor Connector

Quick specs

Item Type
Development Board
Board Type
Gravity
Chip Type
GP8302
Model No. / Name
I2C 4-20mA
Input signal
12Bit, 0x000-0xFFF (0-25mA)
Input I2C Signal High Level
2.7V-5V
See all specifications