Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this bbc microbit and expansion boards is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage 3.3 to 5.5V; i/o pins 16; current (a) 20m. Check that your power source supplies 3.3 to 5.5V before connecting it.

Key Highlights

  • Operating Voltage: 3.3 to 5.5V
  • I/O pins: 16
  • Current (A): 20m

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Operating Voltage3.3 to 5.5V
I/O pins16
Current (A)20m
Interrupt pinsIA (GPIOA), IB (GPIOB)
Connector TypeGravity 4P I2C/UART
Length (mm)44
Width (mm)32
Weight (g)08
Shipping Weight0.02 kg
Shipping Dimensions6 × 5.5 × 3 cm

Overview

The DFRobot Gravity: MCP23017 I2C 16 Digital IO Expansion Module, made by DFRobot, is listed in our bbc microbit and expansion boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Operating Voltage: 3.3 to 5.5V (match this to your power supply; too high a voltage can damage the part)
  • I/O pins: 16
  • Current (A): 20m (your supply must deliver at least this much current)
  • Interrupt pins: IA (GPIOA), IB (GPIOB)
  • Connector Type: Gravity 4P I2C/UART (confirm your cable or board uses the same connector)
  • Length (mm): 44 (measure your mounting space before ordering)
  • Width (mm): 32 (measure your mounting space before ordering)
  • Weight (g): 08 (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Gravity: MCP23017 I2C 16 Digital IO Expansion Module by DFRobot is designed to significantly enhance your microcontroller’s I/O capabilities. Using the MCP23017 chip, it adds 16 additional digital I/O ports and supports up to 128 I/Os when daisy-chained. It features dual GPIO groups (GPIOA & GPIOB), interrupt signal pins (IA & IB), and is compatible with both 3.3V and 5V systems. Ideal for robotics, light cubes, and interactive media, it offers flexible I2C address selection, multiple I/O modes, and easy integration into Gravity systems. Perfect for makers looking to overcome pin limitations in compact, reliable designs.

Note: Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. Adds 16 digital I/O ports per module
  2. Expandable up to 128 I/O ports via I2C (8 addresses)
  3. Dual 8-bit GPIO groups: GPIOA & GPIOB
  4. Supports multiple I/O modes: input, output, pull-up, interrupt
  5. Compatible with 3.3V and 5V systems
  6. I2C address configurable via onboard DIP switch
  7. Built-in interrupt signals (IA & IB) for event detection
  8. Includes Gravity-compatible I2C/UART connector cable

Package Includes:

1 x DFRobot Gravity: MCP23017 I2C 16 Digital IO Expansion Module

1 x Cable

Quick specs

Operating Voltage
3.3 to 5.5V
I/O pins
16
Current (A)
20m
Interrupt pins
IA (GPIOA), IB (GPIOB)
Connector Type
Gravity 4P I2C/UART
Length (mm)
44
See all specifications