Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Gas Sensor; model no. / name SFA40; operating voltage (v) 3.3 – 5.5 V. Check that your power source supplies 3.3 – 5.5 V before connecting it.

Key Highlights

  • Item Type: Gas Sensor
  • Model No. / Name: SFA40
  • Operating Voltage (V): 3.3 – 5.5 V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeGas Sensor
Model No. / NameSFA40
Operating Voltage (V)3.3 – 5.5 V
Current consumption0.08
Detection GasFormaldehyde (HCHO)
Measurement Range0–1000 ppb
Accuracy±20 ppb
InterfaceI2C (Gravity)
Operating humidity0–100% RH (non-condensing)
Length (mm)32
Width (mm)22
Weight (g)04
Shipping Weight0.02 kg
Shipping Dimensions6 × 6 × 3 cm

Overview

The DFRobot Gravity: SFA40 HCHO Sensor (0–1000 ppb Wide Range, High Accuracy ±20 ppb), made by DFRobot, is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Gas Sensor
  • Model No. / Name: SFA40
  • Operating Voltage (V): 3.3 – 5.5 V (match this to your power supply; too high a voltage can damage the part)
  • Current consumption: 0.08 (your supply must deliver at least this much current)
  • Detection Gas: Formaldehyde (HCHO)
  • Measurement Range: 0–1000 ppb (quoted range is usually line-of-sight; walls and interference shorten it)
  • Accuracy: ±20 ppb
  • Interface: I2C (Gravity) (confirm your cable or board uses the same connector)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The DFRobot Gravity: SFA40 HCHO Sensor is a high-precision electrochemical module designed for accurate formaldehyde (HCHO) monitoring in indoor environments. Built around the industry-trusted Sensirion SFA40 chip, this sensor delivers reliable measurements across a 0–1000 ppb range with a low detection threshold of 20 ppb and an accuracy of ±20 ppb.

Unlike conventional gas sensors that react to common household smells, this module features an anti-interference electrochemical design that minimizes false alarms from alcohol or perfumes. An integrated SHT4x temperature and humidity sensor automatically compensates for environmental changes, ensuring stable readings in real-world conditions.

With its Gravity I2C plug-and-play interface, the sensor integrates easily with Arduino and other microcontroller platforms. It is ideal for smart home air quality systems, automated ventilation, air purifiers, and portable health monitoring devices where dependable formaldehyde detection is essential.

Advanced Electrochemical Principle for Specific HCHO Detection


Features:

  1. High-accuracy formaldehyde detection with ±20 ppb error
  2. Wide measurement range from 0 to 1000 ppb
  3. Ultra-low detection threshold of 20 ppb
  4. Electrochemical sensing for specific HCHO detection
  5. Extremely low ethanol cross-sensitivity (<0.3%)
  6. Integrated temperature & humidity compensation (SHT4x)
  7. Real-time output of HCHO, temperature, and humidity
  8. Gravity I2C interface for easy Arduino integration

Package Includes:

1 x DFRobot Gravity: SFA40 HCHO Sensor

1 x Gravity 4pin sensor cable

Quick specs

Item Type
Gas Sensor
Model No. / Name
SFA40
Operating Voltage (V)
3.3 – 5.5 V
Current consumption
0.08
Detection Gas
Formaldehyde (HCHO)
Measurement Range
0–1000 ppb
See all specifications