
1 / 2 · Click to enlarge
At a glance
This stepper motor drivers is a good fit for makers, students and electronics hobbyists. Main specs: item type Motor Driver Module; length (mm) 25; weight (g) 0.002. Check that your power source supplies 2.7V–10.8V DC before connecting it.
Key Highlights
- Item Type: Motor Driver Module
- Length (mm): 25
- Weight (g): 0.002
Ideal For
- Robots and moving models
- Automation projects
- Replacement for a worn motor
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Motor Driver Module |
|---|---|
| Length (mm) | 25 |
| Weight (g) | 0.002 |
| Width (mm) | 18 |
| Operating Voltage (V) | 2.7V–10.8V DC |
| Peak Output Current | 2A |
| No. of Channels | 2 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 4 × 3 × 3 cm |
Overview
The DRV8833 2 Channel H-Bridge Motor Driver Module is listed in our stepper motor drivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Motor Driver Module
- Length (mm): 25 (measure your mounting space before ordering)
- Weight (g): 0.002 (important for drones, RC models and anything you carry)
- Width (mm): 18 (measure your mounting space before ordering)
- Operating Voltage (V): 2.7V–10.8V DC (match this to your power supply; too high a voltage can damage the part)
- Peak Output Current: 2A (your supply must deliver at least this much current)
- No. of Channels: 2
- Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The DRV8833 Dual H-Bridge Motor Driver Module is a compact and high-performance motor control board designed to drive two brushed DC motors or one bipolar stepper motor. Powered by the Texas Instruments DRV8833 motor driver IC, it operates from a 2.7V to 10.8V DC supply, making it ideal for battery-powered and low-voltage applications.
Featuring dual H-bridge outputs with 1.2A continuous current per channel (2A peak), the module delivers efficient bidirectional motor control while maintaining low power consumption. Integrated protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout ensure reliable operation even in demanding conditions.
Its compact design and simple control interface make it an excellent choice for Arduino, ESP32, Raspberry Pi, STM32, and other microcontroller-based projects including robotics, smart vehicles, automation systems, and educational electronics.
Features:
- Based on the genuine TI DRV8833 dual H-bridge motor driver IC.
- Controls 2 brushed DC motors or 1 bipolar stepper motor.
- Wide 2.7V–10.8V DC operating voltage range.
- Delivers 1.2A continuous and 2A peak output current per channel.
- Built-in overcurrent, thermal shutdown, and undervoltage protection.
- Low standby current for battery-operated applications.
- Compact PCB with mounting holes for easy installation.
- Compatible with Arduino, ESP32, Raspberry Pi, STM32, and other development boards.
Specifications:
- Product Type : Dual H-Bridge Motor Driver Module
- Driver IC : DRV8833
- Motor Channels : 2
- Supported Motor Type : 2 Brushed DC Motors or 1 Bipolar Stepper Motor
- Operating Voltage : 2.7V–10.8V DC
- Continuous Output Current : 1.2A per Channel
- Peak Output Current : 2A per Channel
- Control Inputs : AIN1, AIN2, BIN1, BIN2
- Output Pins : AOUT1, AOUT2, BOUT1, BOUT2
- Power Input : VM (Motor Supply), GND
- Protection Features : Overcurrent Protection, Thermal Shutdown, Undervoltage Lockout
- Mounting Type : Through-Hole PCB Mount
- Dimensions : 25.5 × 18 mm
- Weight : 3g
Package Includes:
1 x DRV8833 2 Channel H-Bridge Motor Driver Module
1 x Header Pin
Quick specs
- Item Type
- Motor Driver Module
- Length (mm)
- 25
- Weight (g)
- 0.002
- Width (mm)
- 18
- Operating Voltage (V)
- 2.7V–10.8V DC
- Peak Output Current
- 2A













