
1 / 4 · Click to enlarge
AI Summary
A pocket-sized 2-channel oscilloscope with 1MHz bandwidth, 1MSa/s sampling and a 2.8-inch colour screen for on-the-go signal checks. Its built-in 8MB storage and rechargeable battery make it easy to capture and review waveforms without a bench setup.
Key Highlights
- 2-channel input with 1MHz bandwidth and 1MSa/s sampling rate
- 2.8-inch 320x240 colour TFT display for clear waveform viewing
- 8MB built-in flash storage saves waveforms and images
- Rechargeable 550mAh battery with micro-USB charging
- Built-in square, sine, triangle and sawtooth waveform output
- Pocket-sized 100x57x12mm body weighs only 65g
Ideal For
- Field service technicians diagnosing power supplies and control circuits
- Electronics students and hobbyists learning signal measurement
- Makers debugging I2C, SPI and UART lines on embedded boards
- Audio enthusiasts checking amplifier and filter stages
- RC and drone hobbyists inspecting PWM and servo signals
Buying Tip
Remember that the DS212 does not include probes, so budget for a pair of 1MΩ oscilloscope probes to match its 1MΩ input resistance.
Elecvora expert review
Our verdict
The DS212 is a genuinely pocketable oscilloscope that covers low-frequency diagnostics well, with a clear colour screen and convenient USB storage. It is not a replacement for a full bench scope, but for quick field checks and learning it offers excellent portability.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very compact and lightweight at 65g
- Clear 2.8-inch colour TFT display
- Built-in 8MB storage and rechargeable battery
- Two-channel input with flexible triggering
Cons
- 1MHz bandwidth limits high-frequency work
- Probes are not included
- 8K memory may be tight for long captures
Best for
Field technicians and students needing a portable low-frequency oscilloscope
Not ideal for
Engineers working with high-speed digital or RF signals above 1MHz
Specifications
| Item Type | Oscilloscope |
|---|---|
| No. of Channels | 2 |
| Model No. / Name | DS212 |
| Bandwidth | 1MHz |
| Sampling Rate | 1MSa/s |
| Memory Capacity | 8K |
| Scanning Speed | 1uS/Div~2S/Div(1-2-5 Sequence Step) Horizontal |
| Vertical Sensitivity | 20mv/Div~10V/Div(1-2-5 Sequence Step) |
| Input Resistance | 1MΩ |
| Coupling Type | DC/AC |
| Trigger Modes | Ascend/Descend Edge Trigger Mode |
| Output Waveform | Square, Sine, Triangle, and Sawtooth |
| Storage Capacity | 8 MB Built U Disk |
| Interface | Micro USB |
| Batteries Required | 550 mAh |
| Screen Size (inch) | 2.8" |
| Screen resolution | 320 x 240 |
| Dimensions (L x W x H) mm | 100 x 57 x 12 |
| Weight (g) | 65 |
| Color | Black |
| Shipping Weight | 0.175 kg |
| Shipping Dimensions | 10 × 7 × 3 cm |
Frequently Asked Questions
What probes does the DS212 require?
Can I charge the DS212 while using it?
What file formats does it save?
Does it have a built-in signal generator?
What is the maximum input voltage?
Is the firmware open for modification?
Overview
The DS212 is a compact 2-channel digital storage oscilloscope built for quick signal inspection wherever you are. At just 100 x 57 x 12 mm and 65 g, it slips into a pocket or tool bag, yet offers the core features of a bench instrument: a 2.8-inch 320 x 240 colour TFT screen, 1MHz bandwidth, 1MSa/s sampling rate, 8K memory and a built-in 8MB USB flash disk for storing waveforms and screenshots. Two control gears make menu navigation and parameter adjustment straightforward, so you can focus on the signal rather than the interface.
Key Features
- Dual-channel input: Compare two signals at once with independent vertical sensitivity from 20mV/div to 10V/div.
- Flexible triggering: Ascend and descend edge trigger modes help stabilise repetitive waveforms.
- AC/DC coupling: Switch coupling to block DC offset or view the full signal including DC level.
- Built-in waveform generator: Output square, sine, triangle and sawtooth test signals for quick checks.
- Rechargeable power: A 550mAh lithium battery charges over micro-USB, supporting cordless use.
- Waveform storage: Save and recall data using the 8MB built-in flash disk.
Specifications Explained
Bandwidth and sampling: 1MHz bandwidth and 1MSa/s sampling are suited to low-frequency signals such as audio, power supply ripple and slow digital lines. Memory: 8K sample memory captures enough detail for basic waveform review. Horizontal scanning: 1µs/div to 2s/div in 1-2-5 steps lets you zoom from fast edges to slow trends. Vertical sensitivity: 20mV/div to 10V/div covers small sensor signals up to larger supply rails. Input resistance: 1MΩ matches standard probe impedance for minimal loading. Display: The 2.8-inch 320 x 240 colour screen provides a clear view of waveforms and menus in a small footprint.
Compatibility and Requirements
The DS212 uses a micro-USB interface for charging and data connection. It accepts standard 1MΩ probes (not included) and stores files in BMP, DAT, BUF and CSV formats on its built-in flash disk. No additional software is required for basic operation; files can be read when the device is connected to a computer via USB.
Typical Uses
- Outdoor maintenance of AC/DC switching power supplies and inverters
- Debugging RS232, RS485, I2C and CAN communication lines
- Analysing audio circuits, electronic toys and remote-control models
- Educational experiments and student electronics projects
- Observing relay contact jitter, battery charge curves and load transients
What's in the Box
Package contents are not specified by the manufacturer. Please check the listing or contact us for details before ordering.
Quick specs
- Item Type
- Oscilloscope
- No. of Channels
- 2
- Model No. / Name
- DS212
- Bandwidth
- 1MHz
- Sampling Rate
- 1MSa/s
- Memory Capacity
- 8K















