Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This signal generator module & oscilloscopes is a good fit for makers, students and electronics hobbyists. Main specs: item type Oscilloscope; no. of channels 2; model no. / name DS213.

Key Highlights

  • Small and easy to carry or mount
  • Item Type: Oscilloscope
  • No. of Channels: 2
  • Model No. / Name: DS213

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeOscilloscope
No. of Channels2
Model No. / NameDS213
CPUARM Cortex M3
ADC / DACHWD9288-100
Vertical Resolution8 bits
Coupling TypeDC, AC
Sampling Rate100M Sa/s
Batteries Required1000mAh
Dimensions (L x W x H) mm99.5 x 58.5 x 13.5
Trigger TypeEdge trigger, Pulse width trigger
Trigger ModesAuto,Normal,Single,Slow
DisplayColor TFT LCD display (resolution 240×400)
Storage CapacityBuilt-in U disk storage capacity of 8MB, can store waveform data and waveform images
Additional Specs.Analog channel input sensitivity range: 10mV/Div-10V/Div(1-2-5 Step), Digital channel standard input impedance: 100KΩ, Digital channel maximum input voltage: 5V
Shipping Weight0.175 kg
Shipping Dimensions10 × 7 × 3 cm

Overview

The DS213 Mini Portable Digital Oscilloscope is listed in our signal generator module & oscilloscopes range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Oscilloscope
  • No. of Channels: 2
  • Model No. / Name: DS213
  • CPU: ARM Cortex M3 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • ADC / DAC: HWD9288-100
  • Vertical Resolution: 8 bits
  • Coupling Type: DC, AC
  • Sampling Rate: 100M Sa/s (your supply must deliver at least this much current)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

DS213 is a 5-track, 4-wave line digital storage oscilloscope for general-purpose electronic engineering task and it is based on ARM Cortex M3 core. DS213 uses FPGA to manage external ADC’s control and data cache mode. It provides 4 application partitions for loading and upgrading up to 4 different application firmware. It also has built-in 8MB USB flash drive for storing waveforms and upgrading system firmware. The oscilloscope code application layer is open source, and users can develop oscilloscope firmware according to their needs.


Features:

  1. Mini size, lightweight, portable and handheld;
  2. Charging with Micro USB port
  3. It can store waveforms, making waveform analysis clearer and more effective;
  4. Multiple trigger modes, support Ascend/Descend Edge Trigger, Positive/Negative Pulse Trigger, and Logic Trigger;
  5. Powerful ability to process waveforms, it can automatically measure parameters such us voltage, frequency and pulse width.
  6. Operation Channel: INV [CH_A], INV [CH_B], [CH_A]+[CH_B]、 [CH_A]-[CH_B]、[CH_C]&[CH_D]、[CH_C] | [CH_D]
  7. Vertical Sensitivity: 10mV-10V/div (1-2-5 STEP) (using X1 probe) 100mV-100V/div (1-2-5 STEP) (using X10 probe)
  8. Max Input Voltage: ±40Vpp (using X1 probe) ±400Vpp (using X10 probe)
  9. Trigger Types: Ascend/Descend Edge Trigger Mode, Positive/Negative Pulse Trigger, Logic Trigger
  10. Trigger Mode: Auto, Normal, Single, Slow
  11. Trigger Source: [CH_A] [CH_B] [CH_C] [CH_D]
  12. Signal Source: Square Wave: 10Hz to 8MHz, in total 20 shifts and 3 Vpp Signal Sources;
  13. Sine/Triangle/Sawtooth Wave: 10Hz to 20MHz, in total 11 shifts and 3 Vpp Signal Sources
  14. Storage: built in 8M USB disk
  15. File Types: BMP、BUF、CSV
  16. Auto Measurement Types: Signal sequence/cycle/duty ratio, peak voltage/virtual value/max value/min value/average
  17. Cursor Measurement: Time value, Amplitude value
  18. Display Modes: 4 wave lines: Line 1: [CH_A], HIDE Line 2: [CH_B], HIDE Line 3: [CH_C], REC_1, REC _2, REC _3, REC _4, HIDE Line 4: [CH_D], [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]&[CH_D], [CH_C] | [CH_D], HIDE

Package Includes:

1 x Mini Oscilloscope DS213

1 x X10 Probe Analyzer

1 x X1 Probe Analyzer

1 x Safety Instructions

1 x Hex Key

Quick specs

Item Type
Oscilloscope
No. of Channels
2
Model No. / Name
DS213
CPU
ARM Cortex M3
ADC / DAC
HWD9288-100
Vertical Resolution
8 bits
See all specifications