
1 / 3 · Click to enlarge
AI Summary
EasyMech 628ZZ stainless steel shielded miniature bearings, 8x24x8mm, pack of 4. Deep groove design handles radial and axial loads at high speeds with debris protection.
Key Highlights
- Pack of four 628ZZ shielded miniature bearings
- 8 mm inner diameter, 24 mm outer diameter, 8 mm width
- Stainless steel construction for corrosion resistance
- Deep groove geometry supports radial and axial loads
- Metal shields protect against debris and retain lubricant
- Each bearing weighs approximately 17 g
Ideal For
- RC hobbyists maintaining cars, trucks, and drones
- Robotics builders needing compact, load-bearing joints
- Makers and DIY enthusiasts working on 3D printers or custom machinery
- Technicians repairing gearboxes, pumps, or small motors
- Anyone replacing 8x24x8 mm bearings in mechanical assemblies
Buying Tip
Check that your shaft is exactly 8 mm and your housing bore is 24 mm before ordering; these are precision bearings and tolerances matter.
Elecvora expert review
Our verdict
The EasyMech 628ZZ pack offers a practical solution for anyone needing reliable 8x24x8 mm shielded bearings. The stainless steel construction and deep groove design make them versatile for high-speed and load-bearing applications, and the four-pack ensures you have spares on hand.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Stainless steel for corrosion resistance
- Shielded design protects from debris
- High load capacity for their size
- Convenient pack of four
- Lightweight at 17 g each
Cons
- Not fully sealed for submerged use
- Load capacity depends on proper installation and lubrication
Best for
RC vehicles, robotics, and small machinery maintenance
Not ideal for
Applications requiring fully sealed bearings or extreme contamination
Specifications
| Model No. / Name | 628ZZ |
|---|---|
| Inner Diameter (mm) | 8 |
| Outer Diameter (mm) | 24 |
| Thickness (mm) | 8 |
| Weight (g) | 17 (each) |
| Width (mm) | 8 |
| Shipping Weight | 0.04 kg |
| Shipping Dimensions | 6 × 6 × 3 cm |
What's in the box
- 4 x 628ZZ Stainless Steel Shielded Miniature Bearings 8x24x8mm
Frequently Asked Questions
What does ZZ mean in 628ZZ?
Are these bearings pre-lubricated?
Can these bearings handle both radial and axial loads?
What is the maximum load capacity?
Are these bearings suitable for high-speed applications?
How many bearings are included?
Overview
The EasyMech 628ZZ is a set of four stainless steel shielded miniature ball bearings. Each bearing measures 8 mm inside, 24 mm outside, and 8 mm wide, a size that fits many small shafts, hubs, and rotating assemblies. The deep groove design allows the bearing to carry both radial and axial loads at high rotational speeds, while the metal shields block dust and debris and help keep lubricant in place. Weighing only about 17 g each, these bearings are light enough for portable and precision equipment yet strong enough for demanding applications.
Key Features
- Shielded protection: Metal shields on both sides guard the rolling elements from contaminants, extending service life in dirty or dusty environments.
- Deep groove geometry: Supports combined radial and axial loads and maintains high running accuracy at speed.
- Stainless steel: Offers improved corrosion resistance compared to standard steel bearings, suitable for humid or mildly corrosive conditions.
- High load capacity: Each bearing is designed to handle loads in the range of 250 kg to 500 kg, depending on operating conditions.
- Compact and lightweight: At 8x24x8 mm and 17 g, these bearings fit tight spaces without adding significant weight.
Specifications Explained
8 mm inner diameter: This is the bore size that fits onto an 8 mm shaft. It is a common size for small motors, axles, and RC components.
24 mm outer diameter: The outside diameter determines the housing or hub size the bearing presses into. A 24 mm outer diameter is typical for miniature pulleys, wheels, and gearbox outputs.
8 mm width: The width affects how much space the bearing takes along the shaft. At 8 mm, it provides a good balance between load capacity and compactness.
Shielded design: The metal shields (ZZ) are non-contact and help keep out dust and debris while allowing the bearing to run at high speeds. They are not fully sealed, so they are not intended for submerged or heavily contaminated environments.
Load capacity: The deep groove raceways enable the bearing to support both radial and axial loads. The stated load range of 250 kg to 500 kg reflects the bearing's ability to handle substantial force for its size, though actual capacity depends on speed, lubrication, and mounting.
Compatibility and Requirements
These bearings are compatible with any application that requires an 8 mm shaft and a 24 mm housing bore with an 8 mm width. No special tools are required for installation, but a proper bearing press or gentle tapping with a soft mallet is recommended to avoid damage. Lubrication is pre-applied; additional lubrication may be needed depending on operating conditions.
Typical Uses
The EasyMech 628ZZ bearings are well suited for RC cars, drones, robotics, gearboxes, pumps, compressors, clutches, and printing or textile machinery. They also work well in DIY projects, 3D printers, and other mechanical assemblies where smooth rotation and load support are needed.
What's in the Box
4 x 628ZZ stainless steel shielded miniature bearings (8x24x8 mm).
Quick specs
- Model No. / Name
- 628ZZ
- Inner Diameter (mm)
- 8
- Outer Diameter (mm)
- 24
- Thickness (mm)
- 8
- Weight (g)
- 17 (each)
- Width (mm)
- 8


















