
1 / 3 · Click to enlarge
AI Summary
A pack of four EasyMech 686ZZ shielded miniature ball bearings with a 6mm bore, 13mm outer diameter and 5mm width. The deep-groove shielded design handles combined radial and axial loads in compact, high-speed assemblies.
Key Highlights
- 6mm inner diameter fits shafts sized for the 686ZZ bearing
- 13mm outer diameter and 5mm width suit compact housings
- Metal shields guard the rolling elements from environmental debris
- Deep-groove geometry supports radial and axial loads together
- Each bearing weighs about 3 grams, keeping assemblies light
- Pack of four matching units for one build or spares
Ideal For
- Makers building compact robotics and small mechanical assemblies
- Repair technicians replacing worn 6x13x5mm bearings
- Design engineers prototyping gearboxes and drives
- Hobbyists maintaining printers, textile equipment or small machines
- Workshops keeping a spare set of miniature bearings on hand
Buying Tip
Measure your shaft and housing first: this bearing needs a 6mm shaft and a 13mm bore, and the 5mm width must fit your retaining setup.
Elecvora expert review
Our verdict
A tidy four-pack of shielded miniature bearings for anyone working at the 6x13x5mm size. The deep-groove shielded design is a sensible fit for compact, high-speed assemblies where debris is a concern.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Four matching bearings in one pack
- Shielded construction limits debris ingress
- Deep-groove geometry handles combined radial and axial loads
- Very light at about 3 grams each
- Standard 6x13x5mm dimensions are easy to specify
Cons
- Shields are not a full seal for wet or heavily contaminated environments
- Only the bearings are included, with no mounting hardware
- Load capacity figures are not stated in the product data
Best for
Compact mechanical assemblies and repairs that need a 6x13x5mm shielded bearing
Not ideal for
Wet or heavily contaminated environments that call for a fully sealed bearing
Specifications
| Model No. / Name | 686ZZ |
|---|---|
| Inner Diameter (mm) | 6 |
| Outer Diameter (mm) | 13 |
| Thickness (mm) | 5 |
| Weight (g) | 3 (each) |
| Width (mm) | 5 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 3 × 3 × 3 cm |
What's in the box
- 4 x EasyMech 686ZZ shielded miniature ball bearings, 6 x 13 x 5mm
Frequently Asked Questions
What size shaft does this bearing fit?
How many bearings are included?
What does the ZZ in the model name mean?
Can it handle both radial and axial loads?
Is this bearing sealed against water?
How much does each bearing weigh?
Overview
The EasyMech 686ZZ is a miniature deep-groove ball bearing with a 6mm bore, a 13mm outer diameter and a 5mm width. It arrives as a pack of four, so you can complete a small assembly, replace several worn bearings at once, or keep spares on the bench. Each unit weighs around 3 grams, which makes the set a light addition to compact mechanisms.
The ZZ suffix refers to the shielded construction: metal shields sit over the rolling elements and help keep dust and debris out of the raceway. That protection matters in busy mechanical environments where contamination could otherwise shorten bearing life and reduce running speed.
Key Features
- Deep-groove geometry: designed to support combined radial and axial loads while maintaining running accuracy at high rotational speeds.
- Shielded on both sides: the shields cover the working parts of the bearing to limit exposure to environmental debris.
- Compact envelope: 6mm bore, 13mm outer diameter and 5mm width fit small housings and tight layouts.
- Lightweight: approximately 3 grams per bearing keeps the overall assembly mass low.
- Four-piece pack: matching bearings for multi-bearing shafts, repairs or spares.
Specifications Explained
6mm inner diameter is the bore that slides onto a 6mm shaft. Check your shaft diameter before ordering, since this is the dimension that decides fit.
13mm outer diameter is the size that seats into the housing or bore. Your mounting hole should be machined to accept a 13mm outer ring.
5mm width is the thickness of the bearing along the shaft axis. Confirm that your housing and retaining arrangement have room for this width.
Shielded design means the bearing is protected on its faces rather than left open. This is helpful where dust or debris is present, but the shields are not a substitute for a fully sealed bearing in wet or heavily contaminated conditions.
Compatibility and Requirements
This bearing is defined by its 6mm bore, 13mm outer diameter and 5mm width, so it fits shafts and housings machined to those dimensions. It is a deep-groove ball bearing intended for combined radial and axial loads in compact, high-speed applications. No additional mounting hardware, seals or adapters are included beyond the four bearings themselves.
Typical Uses
Common applications for this size and type include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, along with small robotics and other compact mechanical assemblies. The shielded construction is useful where the bearing will be exposed to everyday dust and debris.
What's in the Box
- 4 x EasyMech 686ZZ shielded miniature ball bearings, 6 x 13 x 5mm
Quick specs
- Model No. / Name
- 686ZZ
- Inner Diameter (mm)
- 6
- Outer Diameter (mm)
- 13
- Thickness (mm)
- 5
- Weight (g)
- 3 (each)
- Width (mm)
- 5


















