Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact aluminium rigid coupling with 6 mm and 10 mm bores and two M3 clamp screws for a firm, low-maintenance shaft connection. Its clamp-style mounting tightens onto the shafts without damaging them, making installation and removal straightforward.

Key Highlights

  • Machined aluminium body with two different bore sizes: 6 mm and 10 mm
  • Rigid design holds both shafts in fixed alignment for zero-backlash drive
  • Clamp-style fixing with two M3 screws tightens without damaging shaft surfaces
  • 30 mm overall length and only 35 g for low added mass
  • Corrosion-resistant material needs minimal maintenance
  • Simple structure makes fitting and removal quick and easy

Ideal For

  • RC and FPV builders joining a 6 mm motor shaft to a 10 mm driven shaft
  • Robotics hobbyists assembling compact drivetrains
  • Makers and prototypers who need a reusable clamp-style coupling
  • Workshop users maintaining small motor-driven equipment

Buying Tip

Measure both shafts with calipers before ordering, and confirm they will sit in line, since a rigid coupling does not compensate for misalignment.

Elecvora expert review

Our verdict

A neat, lightweight rigid coupling that makes joining a 6 mm and a 10 mm shaft simple, with clamp screws that protect the shaft surfaces. It is a sensible pick for compact builds where the shafts are already well aligned.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Two bore sizes cover mixed-diameter shaft joins
  • Clamp screws avoid marking the shafts
  • Light 35 g body with low rotating mass
  • Aluminium construction resists corrosion

Cons

  • Rigid design does not tolerate shaft misalignment
  • Only two M3 screws are supplied, so no spares are included
  • Requires careful alignment during installation

Best for

Compact RC, FPV and robotics builds with well-aligned 6 mm and 10 mm shafts

Not ideal for

Applications with offset or angled shafts that need a flexible coupling

Specifications

Item TypeRigid Coupling
MaterialAluminium
Bore Diameter [d1] (mm)6
Bore Diameter [d2] (mm)10
Additional Specs.Catch Shaft Type: Tighten
Screws2 x M3
Weight (g)35
Shipping Weight0.037 kg
Shipping Dimensions7 × 6 × 2 cm

What's in the box

  • 1 x EasyMech 6×10 Aluminium Rigid Coupling

Frequently Asked Questions

What shaft sizes does this coupling fit?
It has a 6 mm bore on one side and a 10 mm bore on the other, so it joins a 6 mm shaft to a 10 mm shaft.
Is this a flexible or rigid coupling?
It is a rigid coupling, so it holds both shafts in a fixed line and does not compensate for misalignment.
How is the coupling fixed to the shafts?
Two M3 screws tighten the clamping collar onto the shafts, which avoids pressing directly into the shaft surface.
What is included with the coupling?
The package contains one EasyMech 6×10 Aluminium Rigid Coupling.
Does it need any power supply?
No, it is a purely mechanical part and requires no electrical connection.
How should I care for it?
Keep it clean and dry, and check the M3 screws periodically to make sure they remain snug.

Overview

The EasyMech 6×10 Aluminium Rigid Coupling connects a 6 mm shaft to a 10 mm shaft in a straight, fixed line. The body is machined from aluminium, measures 30 mm in length and weighs just 35 g, so it suits small motor-driven assemblies where weight and space matter. Unlike a flexible coupling, a rigid coupling does not allow for misalignment between shafts, which makes it a good choice when the two shafts are already well supported and you want a firm, direct transfer of rotation.

Key Features

  • Two bore sizes: one 6 mm bore and one 10 mm bore, so shafts of different diameters can be joined.
  • Clamp-style fixing: two M3 screws tighten the collar onto each shaft without driving into the shaft surface.
  • Rigid construction: keeps both shafts aligned and removes torsional play from the connection.
  • Lightweight: 35 g in total, with a low moment of inertia for smooth rotation.
  • Aluminium body: resists corrosion and requires very little maintenance.

Specifications Explained

The two bore diameters are the most important figures to check before ordering. The 6 mm side accepts a 6 mm shaft, and the 10 mm side accepts a 10 mm shaft. Because the coupling is rigid, both shafts should sit in line with each other; any offset or angle between them will be transferred to the bearings and motor. The 30 mm length gives enough clamping area for the two M3 screws while keeping the part compact. The clamp design is worth noting: the screws tighten the collar around the shaft rather than pressing a point into it, which helps protect the shaft surface during fitting and removal. At 35 g, the coupling adds little rotating mass, which is useful in small drivetrains where every gram counts.

Compatibility and Requirements

This coupling is intended for a 6 mm shaft on one side and a 10 mm shaft on the other. It uses two M3 screws for clamping, and you will need a suitable driver to tighten them. Because it is a rigid coupling, the two shafts should be supported so that they remain in line. No other mounting hardware is listed beyond the coupling itself.

Typical Uses

It fits small motor-to-shaft connections in RC models, FPV builds, robotics projects and light mechanical assemblies where a 6 mm and a 10 mm shaft need to be joined. It is also useful in workshop and prototype work where a compact, reusable coupling is needed for testing different shaft combinations.

What's in the Box

1 x EasyMech 6×10 Aluminium Rigid Coupling.

Quick specs

Item Type
Rigid Coupling
Material
Aluminium
Bore Diameter [d1] (mm)
6
Bore Diameter [d2] (mm)
10
Additional Specs.
Catch Shaft Type: Tighten
Screws
2 x M3
See all specifications