
1 / 5 · Click to enlarge
AI Summary
A 111 mm mild steel shaft that links an EasyMech Universal Bearing Housing to a heavy-duty wheel for smooth, secure motor power transfer. It comes with a 12 mm circlip and an M8 hex nut with plain washer set.
Key Highlights
- 111 mm mild steel shaft for HD wheel assemblies
- 12 mm shaft diameter with circlip retention
- 90 g lightweight addition to robot chassis
- Works with EasyMech Universal Bearing Housing
- Includes M8 hex nut and plain washer set
- Hardened mild steel for load-bearing duty
Ideal For
- Robotics students building motor-driven wheel assemblies
- Makers maintaining EasyMech HD wheel setups
- Hobby robot builders needing a supported drive shaft
- Engineering labs prototyping mobile platforms
- Educators assembling classroom robot kits
Buying Tip
Check that your wheel hub and EasyMech Universal Bearing Housing both accept a 12 mm shaft before ordering, since the motor, housing and wheel are sold separately.
Elecvora expert review
Our verdict
A sensible, purpose-built shaft for anyone running the EasyMech HD wheel and universal bearing housing combination. It removes the guesswork of sourcing a matching shaft and fasteners separately.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Correct 12 mm diameter and 111 mm length for the intended assembly
- Hardened mild steel construction
- Supplied circlip, M8 nut and washer simplify installation
- Only 90 g added mass
Cons
- Requires the separate EasyMech Universal Bearing Housing
- Not a universal fit for other wheel hubs
- Motor and wheel are not included
Best for
Builders using the EasyMech HD wheel and universal bearing housing assembly
Not ideal for
Projects needing a shaft diameter other than 12 mm
Specifications
| Item Type | Shaft |
|---|---|
| Material | Mild Steel |
| Shaft Length (mm) | 111 |
| Weight (g) | 90 |
| Shipping Weight | 0.09 kg |
| Shipping Dimensions | 12 × 2 × 2 cm |
What's in the box
- 1 x EasyMech MS Shaft for HD Wheel
- 1 x MS Hex Nut M8 with plain washer set
- 1 x Circlip A Type, 12 mm shaft diameter
Frequently Asked Questions
What is this shaft used for?
What is the shaft diameter and length?
Does it include mounting hardware?
Are the motor, bearing housing and wheel included?
What material is it made from?
How should I care for the shaft?
Overview
The EasyMech MS Shaft for HD Wheel is a mechanical link for robot drive assemblies. It fits between a heavy-duty wheel and the EasyMech Universal Bearing Housing that connects to the motor, so motor rotation reaches the wheel through a supported shaft rather than an unsupported axle. The part is made from hardened mild steel and measures 111 mm in length with a 12 mm shaft diameter.
Because the bearing housing carries the load, the shaft is shielded from excess stress during normal running. That arrangement is the point of the design: power goes to the wheel securely, and the shaft and motor are protected from the forces a heavy wheel can generate.
Key Features
- Hardened mild steel construction for a durable, rigid drive link
- 111 mm length suited to HD wheel and bearing housing assemblies
- 12 mm shaft diameter matched to the supplied circlip
- Light 90 g weight that keeps chassis mass low
- Included fasteners: M8 hex nut and plain washer set plus an A-type circlip
Specifications Explained
Shaft length and diameter
At 111 mm, the shaft provides the span needed between the bearing housing and the wheel in this assembly. The 12 mm diameter is the reference dimension to check when confirming that the shaft suits your bearing housing and wheel hub.
Material and weight
Mild steel gives the shaft the stiffness required to transmit torque without flexing noticeably, and the hardened treatment supports repeated use. At 90 g, it will not meaningfully affect the balance or payload of a small robot.
Retention hardware
The A-type circlip seats on the 12 mm shaft to hold the assembly in position, while the M8 hex nut and plain washer set secure the mounting side. Using the supplied parts together keeps the joint consistent.
Compatibility and Requirements
This shaft is intended for use with the EasyMech Universal Bearing Housing and a heavy-duty wheel. The bearing housing connects to the motor and supports the shaft; the shaft then drives the wheel. Confirm your wheel hub and bearing housing accept a 12 mm shaft before assembly. The motor, bearing housing and wheel are not included.
Typical Uses
- Robot drive assemblies using an HD wheel and universal bearing housing
- Student and hobby robotics projects with motor-driven wheels
- Rebuilding or refreshing an existing EasyMech wheel assembly
- Prototyping mobile platforms where a supported shaft is preferred
What's in the Box
- 1 x EasyMech MS Shaft for HD Wheel
- 1 x MS Hex Nut M8 with plain washer set
- 1 x Circlip A Type, 12 mm shaft diameter
Quick specs
- Item Type
- Shaft
- Material
- Mild Steel
- Shaft Length (mm)
- 111
- Weight (g)
- 90
- Shipping Weight
- 0.09 kg
- Shipping Dimensions
- 12 × 2 × 2 cm






















