
1 / 3 · Click to enlarge
AI Summary
A 4.3 inch 320x240 TFT touchscreen HMI module built around the RP2040, with Wi-Fi, Bluetooth 5.0 and C/C++ plus LVGL support. It gives you a display and microcontroller on one board for control panels and IoT interfaces.
Key Highlights
- 4.3 inch TFT LCD touchscreen at 320x240 resolution
- RP2040 dual-core ARM Cortex-M0+ at 133 MHz
- 264kB SRAM and 2MB flash onboard
- Dual-band 2.4GHz/5GHz Wi-Fi with Bluetooth 5.0
- C/C++ and LVGL support with SDK and documentation
- I2C, UART and USB interfaces plus low-power sleep modes
Ideal For
- Makers building touch-based control panels
- Embedded developers working with LVGL interfaces
- IoT hobbyists adding a display to Wi-Fi or Bluetooth projects
- Students learning RP2040 and C/C++ development
- Engineers prototyping benchtop instruments and dashboards
Buying Tip
Confirm your project can supply a stable 5V-2A input, since the module's power requirement is higher than a standard low-current USB port may deliver reliably.
Elecvora expert review
Our verdict
A tidy all-in-one HMI module that saves wiring time by putting an RP2040 and a 4.3 inch touchscreen on one board. It is a sensible pick for interface-driven projects where Wi-Fi and Bluetooth are part of the plan.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Display, touch and RP2040 on a single board
- Dual-band Wi-Fi and Bluetooth 5.0 built in
- C/C++ and LVGL support with SDK documentation
- Useful I2C, UART and USB interfaces
- Low-power sleep modes for always-on builds
Cons
- 320x240 resolution limits fine detail on a 4.3 inch panel
- Requires a 5V-2A supply, not just any USB port
- Brightness range suits indoor use rather than direct sunlight
Best for
Makers and developers building touch interfaces with connectivity
Not ideal for
Projects needing a high-density or outdoor-bright display
Specifications
| Model No. / Name | TFT LCD Display |
|---|---|
| Display Size (Inch) | 4.3 |
| Display Resolution (pixel) | 320 × 240 |
| Brightness (NIT) | 250~350 cd/m² |
| Power Input | 5V-2A |
| Shipping Weight | 0.5 kg |
| Shipping Dimensions | 16 × 9 × 3 cm |
What's in the box
- 1x Crow Panel Pico Display 4.3 inch
- 1x USB cable
- 1x 4-pin DuPont cable
Frequently Asked Questions
What microcontroller does this module use?
What is the display resolution and size?
What power input does it need?
Does it support wireless connectivity?
What development options are supported?
What comes in the package?
Overview
The ELECROW Crow Panel Pico Display combines a 4.3 inch TFT LCD touchscreen with an RP2040 microcontroller on a single HMI module. The panel runs at 320x240 resolution with brightness in the 250 to 350 cd/m² range, so it stays readable in normal indoor lighting. Because the display and the controller are already integrated, you can move straight to interface design instead of sourcing a screen, a board and the wiring between them.
Key Features
- Integrated RP2040: dual-core ARM Cortex-M0+ at 133 MHz with 264kB SRAM and 2MB flash.
- Touch display: 4.3 inch TFT LCD at 320x240 with capacitive multi-touch.
- Wireless: dual-band Wi-Fi on 2.4GHz and 5GHz plus Bluetooth 5.0 for connected projects.
- Development support: C/C++ and LVGL compatibility, with an SDK and documentation included.
- Interfaces: I2C, UART and USB for sensors, modules and programming.
- Power management: low-power sleep modes help reduce consumption in always-on builds.
Specifications Explained
The 320x240 resolution suits text-heavy dashboards, button grids, status readouts and simple graphs. At 4.3 inches the pixel density is modest, so large fonts and clear icons work better than dense layouts. Brightness of 250 to 350 cd/m² is comfortable for indoor panels, kiosks and benchtop instruments.
The RP2040 provides two Cortex-M0+ cores at 133 MHz with 264kB SRAM and 2MB flash, enough headroom for a graphical interface plus sensor handling. Power input is 5V-2A, so use a supply that can deliver that current reliably. The module measures roughly 16 x 9 x 3 cm in its shipping form and weighs about 0.5 kg as a package.
Compatibility and Requirements
The board supports C/C++ development and LVGL for building interfaces, and the supplied SDK and documentation cover getting started. I2C, UART and USB cover common peripherals and programming connections. A 5V-2A power source is required; the package includes a USB cable and a 4-pin DuPont cable for hooking up external hardware.
Typical Uses
- Control panels for home automation and equipment
- Sensor dashboards and data readouts
- Small IoT terminals using Wi-Fi or Bluetooth
- Bench instruments and test fixtures
- Learning projects around LVGL and embedded UI design
What's in the Box
- 1x Crow Panel Pico Display 4.3 inch
- 1x USB cable
- 1x 4-pin DuPont cable
Quick specs
- Model No. / Name
- TFT LCD Display
- Display Size (Inch)
- 4.3
- Display Resolution (pixel)
- 320 × 240
- Brightness (NIT)
- 250~350 cd/m²
- Power Input
- 5V-2A
- Shipping Weight
- 0.5 kg



















