Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Emax Lightning 30A Brushless ESC packs an F396 MCU and 30A continuous rating into a 6g, 24.5x12.5mm board. It supports 2-4S LiPo, active braking, and firmware updates via signal wire for smooth, responsive control.

Key Highlights

  • F396 MCU for fast, smooth throttle response
  • 30A continuous, 40A burst current handling
  • Supports 2S to 4S LiPo batteries
  • Ultra-light 6g weight and compact 24.5x12.5x5mm size
  • Active braking and firmware upgradable via signal wire
  • BLHeli_S firmware with Oneshot and Multishot support

Ideal For

  • FPV drone pilots building lightweight 3-5 inch quads
  • RC plane hobbyists needing a compact 30A ESC
  • Multirotor enthusiasts upgrading to BLHeli_S
  • DIY drone builders seeking reliable, small ESCs
  • Racers looking for fast throttle response

Buying Tip

Check that your motor's maximum current draw stays below 30A continuous and that your battery is within the 2S-4S range for safe operation.

Elecvora expert review

Our verdict

The Emax Lightning 30A ESC offers impressive performance in a tiny package, with the F396 MCU and BLHeli_S firmware delivering smooth control. It's a solid choice for weight-conscious builds that need reliable 30A handling.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very small and lightweight (6g)
  • Smooth throttle response from F396 MCU and BLHeli_S
  • Supports active braking and firmware updates
  • High burst current for aggressive flying

Cons

  • No BEC, so separate power needed for receiver
  • Requires soldering for installation
  • Limited to 4S maximum

Best for

FPV drone racers and freestyle pilots building lightweight quads

Not ideal for

Beginners who prefer plug-and-play ESCs with built-in BEC

Specifications

Item TypeBrushless ESC
MCU TypeF396
Continuous Discharge Current (A)30
Burst Current (A)40
Compatible LiPO Batteries2S to 4S
ColorBlack
BEC (Y/N)NO
Dimensions (L x W x H) mm24.5 x 12.5 x 5.0
Weight (g)6
ApplicationBLDC Motors, Multirotors, Rc Planes etc.
GTIN799899084221
Shipping Weight0.01 kg
Shipping Dimensions5 × 4 × 2 cm

What's in the box

  • 1 x Emax Lightning 30A Brushless ESC (Original)

Frequently Asked Questions

What batteries can I use with this ESC?
It supports 2S to 4S LiPo batteries, with a maximum of 4.35V per cell if using high-voltage packs.
Does this ESC have a BEC?
No, it does not include a BEC, so you will need to power your receiver and other electronics separately.
Can I update the firmware?
Yes, the firmware is upgradable via the signal wire using standard BLHeli_S flashing tools.
What is included in the package?
The package includes one Emax Lightning 30A Brushless ESC (Original).
What motors is this ESC compatible with?
It works with brushless DC motors, commonly used in multirotors and RC planes, as long as the current draw stays within 30A continuous.
How do I cool the ESC?
Ensure proper airflow around the ESC during operation; it is designed to be lightweight and may require ventilation in enclosed builds.

Overview

The Emax Lightning 30A Brushless ESC is a compact, high-performance speed controller engineered for BLDC motors in multirotors, RC planes, and other electric models. At its core is the F396 MCU, a powerful driver chip that enables precise motor control and rapid throttle response. This ESC is part of the Lightning series, known for combining a small footprint with robust current handling.

Weighing just 6 grams and measuring 24.5 x 12.5 x 5.0 mm, it is easy to integrate into tight builds without adding unnecessary bulk. The ESC supports 2S to 4S LiPo batteries and delivers 30A continuous current with a 40A burst rating, making it suitable for a wide range of power setups.

Key Features

  • F396 MCU: High-performance microcontroller for smooth, responsive throttle control.
  • Active braking: Provides quicker motor deceleration and improved flight characteristics.
  • Firmware upgradable: Update firmware via the signal wire to keep pace with new features and improvements.
  • Compact and lightweight: 24.5 x 12.5 x 5.0 mm and 6 g, ideal for weight-sensitive builds.
  • High current burst: 40A burst handling for demanding maneuvers.
  • BLHeli_S firmware: Hardware-generated PWM for silky-smooth throttle response.
  • Oneshot and Multishot ready: Compatible with popular digital protocols for reduced latency.

Specifications Explained

Continuous and burst current: The 30A continuous rating indicates the ESC can handle sustained currents up to 30 amps, while the 40A burst rating covers brief spikes during aggressive throttle changes. This makes it suitable for moderate to high-power setups.

Battery compatibility: Support for 2S to 4S LiPo batteries means you can use it with a range of pack voltages, from 7.4V to 16.8V (4.2V per cell). Always ensure your battery's voltage stays within this range.

MCU and firmware: The F396 MCU is a capable processor that, combined with BLHeli_S firmware, delivers smooth throttle linearity. Firmware can be updated via the signal wire, allowing you to benefit from future enhancements.

Size and weight: At 6 grams and with a 24.5 x 12.5 x 5.0 mm footprint, this ESC is among the smallest in its class, helping to keep your build light and agile.

Compatibility and Requirements

This ESC is designed for brushless DC motors and is compatible with 2S to 4S LiPo batteries. It does not include a BEC (battery eliminator circuit), so you will need to power your receiver and other electronics separately. The ESC supports Oneshot and Multishot protocols and can be configured using standard BLHeli_S firmware tools. Ensure your motor's current draw does not exceed the ESC's continuous rating.

Typical Uses

Ideal for FPV drone racing and freestyle builds, RC airplanes, and other multirotor applications where weight and performance are critical. Its compact size makes it a good fit for 3-inch to 5-inch quads and small fixed-wing models.

What's in the Box

  • 1 x Emax Lightning 30A Brushless ESC (Original)

Quick specs

Item Type
Brushless ESC
MCU Type
F396
Continuous Discharge Current (A)
30
Burst Current (A)
40
Compatible LiPO Batteries
2S to 4S
Color
Black
See all specifications