
1 / 5 · Click to enlarge
AI Summary
The EMAX XA2212 980KV is a 55g outrunner brushless motor for multirotors, delivering up to 880g thrust on 2S–3S LiPo with 9–10 inch props. Its 12N14P design and quality bearings support smooth, efficient endurance flights.
Key Highlights
- 980 KV rating tuned for endurance and long-range multirotor builds
- Up to 880 g maximum thrust per motor
- Runs on 2S to 3S LiPo batteries
- Supports 9 to 10 inch propellers
- 12N14P stator with 3 mm shaft
- Lightweight at 55 g with prop adapter included
Ideal For
- Long-range quadcopter builders
- Endurance multirotor pilots
- Tricopter and hexacopter hobbyists
- RC model makers needing a 980 KV outrunner
- Drone builders using 2S–3S LiPo and 9–10 inch props
Buying Tip
Check that your frame's motor mount and ESC can handle the current draw of a 980 KV motor swinging 9–10 inch props before ordering.
Elecvora expert review
Our verdict
The EMAX XA2212 980KV is a dependable, lightweight outrunner for endurance-oriented multirotors. Its 880 g thrust ceiling and 2S–3S flexibility make it a practical choice for builders who value smooth, efficient flight over extreme performance.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Efficient 980 KV windings suit 9–10 inch props
- Light 55 g motor weight
- Includes prop adapter
- 12N14P design for smooth torque
- Works with common 2S and 3S LiPo packs
Cons
- Limited to 2S–3S LiPo, so not for high-voltage builds
- Requires separate ESC, battery and propellers
- Maximum thrust of 880 g may be modest for heavy frames
Best for
Endurance-focused multirotor builders using 2S–3S LiPo and 9–10 inch props
Not ideal for
High-voltage or high-speed racing builds needing more than 3S
Specifications
| Motor KV (RPM/V) | 980 KV |
|---|---|
| Motor Type | Brushless Motor |
| Compatible LiPO Batteries | 2S to 3S |
| Maximum Thrust (gm) | 880 |
| Shaft Diameter | 3 mm |
| Framework | 12N14P |
| Compatible Prop (inch) | 9 ~ 10 |
| Length (mm) | 43.16 |
| Width (mm) | 27.9 |
| Weight (g) | 55 |
| Shipping Weight | 0.059 kg |
| Shipping Dimensions | 15 × 10 × 6 cm |
What's in the box
- 1 x EMAX XA2212 980KV Outrunner Brushless DC Motor
- 1 x Prop adapter
Frequently Asked Questions
What battery should I use with the EMAX XA2212 980KV?
What size propellers fit this motor?
How much thrust does one motor produce?
What is included in the package?
How do I maintain this motor?
Can I use this motor on a hexacopter or tricopter?
Overview
The EMAX XA2212 980KV is an outrunner brushless DC motor designed for multirotor aircraft that benefit from a moderate KV and larger props. Its 980 KV windings sit in the endurance-oriented range, making it a sensible choice for frames where flight time and smooth control matter more than aggressive acceleration. At 55 grams, the motor adds little mass, and its 27.9 mm width and 43.16 mm length fit common arm-mounted installations.
Key Features
- 980 KV brushless outrunner with 12N14P framework
- Maximum thrust of 880 g per motor
- Compatible with 2S to 3S LiPo batteries
- Accepts 9 to 10 inch propellers
- 3 mm shaft diameter
- High-quality bearings for smooth, low-vibration running
- Prop adapter included for easy propeller mounting
Specifications Explained
KV rating: 980 KV means the motor spins roughly 980 RPM per volt applied. On a 3S LiPo (nominal 11.1 V) that translates to a no-load speed of around 10,878 RPM, which suits the recommended 9 to 10 inch props without over-revving. On 2S the motor turns slower, giving a gentler, more efficient response.
Thrust and props: The 880 g maximum thrust figure is the peak the motor can produce with a suitable propeller. Because the recommended prop range is 9 to 10 inches, you have room to tune thrust versus efficiency: smaller props draw less current, larger props produce more lift.
12N14P framework: Twelve stator teeth and fourteen rotor poles is a common outrunner configuration that helps deliver smooth torque and reduced cogging, which is useful for stable hovering and gentle manoeuvres.
Physical size: A 3 mm shaft matches many standard prop adapters and collets. The 55 g motor weight and compact 27.9 mm diameter make it easy to balance across a multirotor frame.
Compatibility and Requirements
This motor is intended for 2S to 3S LiPo batteries and 9 to 10 inch propellers. You will need a suitable brushless ESC and a multirotor frame or arm with a matching motor mount pattern. The included prop adapter allows you to fit props with a 3 mm shaft bore. No battery, ESC, propeller or frame is included.
Typical Uses
The XA2212 980KV is well suited to quadcopters, tricopters, hexacopters and other multirotor layouts where endurance and smooth flight are priorities. It also works for general RC model projects that call for a 980 KV outrunner and 9 to 10 inch props.
What's in the Box
One EMAX XA2212 980KV outrunner brushless DC motor and a prop adapter.
Quick specs
- Motor KV (RPM/V)
- 980 KV
- Motor Type
- Brushless Motor
- Compatible LiPO Batteries
- 2S to 3S
- Maximum Thrust (gm)
- 880
- Shaft Diameter
- 3 mm
- Framework
- 12N14P




















