Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A matched pair of 14x4.7 glass fiber nylon propellers in gray, with one CW and one CCW blade plus 3, 4.5 and 6 mm reducers. The lightweight 60 g design and 7.6 mm shaft bore make them a practical choice for 14-inch multi-copter builds.

Key Highlights

  • 14-inch diameter with 4.7-inch pitch for multi-copter lift
  • Glass fiber nylon construction balances lightness and rigidity
  • Includes one CW and one CCW propeller per pair
  • Three plastic reducers: 3 mm, 4.5 mm and 6 mm
  • 7.6 mm shaft bore and 60 g weight per propeller
  • Gray finish with a two-blade profile

Ideal For

  • DIY drone builders working on 14-inch multi-copter frames
  • RC hobbyists needing a matched CW and CCW propeller pair
  • Multi-rotor enthusiasts looking for spare or replacement blades
  • Makers who need reducers for 3 mm, 4.5 mm or 6 mm motor shafts

Buying Tip

Check your motor shaft diameter against the 7.6 mm bore and the included 3 mm, 4.5 mm and 6 mm reducers before ordering, and confirm your frame has clearance for 14-inch propellers.

Elecvora expert review

Our verdict

The Pro-Range 1447 offers a practical matched pair of 14-inch glass fiber nylon propellers with a useful reducer set for different motor shafts. It is a sensible choice for builders who need a straightforward replacement or spare pair for a 14-inch multi-copter.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Includes both CW and CCW propellers in one pack
  • Three reducers cover 3 mm, 4.5 mm and 6 mm shafts
  • Glass fiber nylon construction supports rigidity
  • Lightweight at about 60 g per propeller

Cons

  • Only one pair per pack, so a full quad may need multiple packs
  • No motors, frames or mounting hardware included
  • Performance depends on the rest of the build and is not specified

Best for

14-inch multi-copter builders needing a matched propeller pair with reducers

Not ideal for

Pilots needing small propellers for compact or high-speed builds

Specifications

Prop. Diameter (inch)14
Rotation DirectionCCW, CW
Shaft Diameter7.6 mm
No. of Blades2
Pitch(inch)4.7
Rotation1CW+1CCW
Length (mm)354
Plastic Reducers3, 4.5, 6
Weight (g)60
Shipping Weight0.064 kg
Shipping Dimensions36 × 6 × 1 cm

What's in the box

  • 1 x CCW propeller 1447 (14x4.7)
  • 1 x CW propeller 1447 (14x4.7)
  • 1 set of propeller reducers (3 mm, 4.5 mm, 6 mm)

Frequently Asked Questions

What is included in this propeller set?
The pack contains one CCW propeller, one CW propeller and a set of plastic reducers in 3 mm, 4.5 mm and 6 mm sizes.
Will these fit my motor shaft?
The propeller has a 7.6 mm bore, and the included reducers allow fitting to 3 mm, 4.5 mm or 6 mm shafts. Check your motor shaft size before ordering.
What size frame do these propellers suit?
They are 14-inch propellers with a 354 mm length, so they are intended for multi-copter frames that can accommodate that diameter and clearance.
How much does each propeller weigh?
Each propeller weighs approximately 60 g, and the shipping weight for the set is about 0.064 kg.
Are these propellers suitable for general drone use?
They are designed for multi-copters and DIY drone builds. Suitability depends on your motor, frame and overall setup, so verify compatibility before use.
How should I care for these propellers?
Inspect them for cracks or damage before each flight, keep the reducers secure and store them away from excessive heat or impact.

Overview

The Pro-Range 1447 is a two-blade propeller set sized for 14-inch multi-copter applications. Each pair ships with one clockwise and one counter-clockwise propeller, allowing you to mount a matched set on your airframe. The blades are molded from glass fiber reinforced nylon in a gray color, a material choice that aims to keep weight low while maintaining enough stiffness for stable rotation.

With a 14-inch diameter and a 4.7-inch pitch, these propellers are intended for builds that use larger frames and need a broad disc area. The 7.6 mm shaft bore is paired with three plastic reducers, so you can adapt the mounting hole to 3 mm, 4.5 mm or 6 mm motor shafts. At approximately 60 g per propeller, the set remains manageable for multi-rotor platforms.

Key Features

  • Matched rotation pair: one CW and one CCW propeller in every pack.
  • Glass fiber nylon build: a composite material that supports rigidity without excessive weight.
  • Reducer set included: 3 mm, 4.5 mm and 6 mm plastic reducers help fit different shaft sizes.
  • Two-blade design: a simple, efficient profile for multi-copter use.
  • Gray finish: a neutral color that suits most airframes.

Specifications Explained

Diameter and pitch: the 14-inch diameter defines the swept area, while the 4.7-inch pitch describes how far the propeller would advance in one revolution in ideal conditions. Together they indicate a larger, slower-turning propeller suited to multi-copter lift rather than high-speed flight.

Shaft bore and reducers: the native bore is 7.6 mm. The supplied reducers let you step down to 3 mm, 4.5 mm or 6 mm, which helps when matching the propeller to a motor shaft. Always confirm your motor shaft size before mounting.

Weight: at about 60 g per propeller, the pair adds a modest amount of mass to the airframe. Lighter propellers can help reduce rotational inertia, but final performance depends on the complete build.

Compatibility and Requirements

These propellers are intended for multi-copter use with a 7.6 mm bore or a motor shaft that matches one of the included reducers. You will need a suitable motor and airframe, and you should verify that the 14-inch diameter fits your frame and clearance requirements. The package does not include motors, frames or mounting hardware beyond the reducers.

Typical Uses

These propellers suit DIY drone builders, RC hobbyists and multi-rotor enthusiasts working on 14-inch-class platforms. They can be used as a replacement pair or as spares for existing builds. The gray glass fiber nylon construction is appropriate for general multi-copter flight where a larger propeller diameter is needed.

What's in the Box

  • 1 x CCW propeller 1447 (14x4.7)
  • 1 x CW propeller 1447 (14x4.7)
  • 1 set of propeller reducers (3 mm, 4.5 mm, 6 mm)

Quick specs

Prop. Diameter (inch)
14
Rotation Direction
CCW, CW
Shaft Diameter
7.6 mm
No. of Blades
2
Pitch(inch)
4.7
Rotation
1CW+1CCW
See all specifications