
1 / 4 · Click to enlarge
AI Summary
A pair of 12-inch glass fiber nylon propellers with 3.8-inch pitch, one CW and one CCW, plus 3, 4.5, and 6 mm reducers. The lightweight 48 g blades and included adapters make them easy to fit on a range of multirotor motor shafts.
Key Highlights
- 12-inch diameter with 3.8-inch pitch for multirotor lift
- Glass fiber nylon construction balances strength and low weight
- Includes one clockwise and one counter-clockwise propeller
- Comes with 3 mm, 4.5 mm, and 6 mm plastic reducers
- 7.8 mm shaft bore suits common motor shaft sizes
- Each propeller weighs approximately 48 g
Ideal For
- DIY drone builders working on 12-inch multirotor frames
- RC hobbyists assembling quadcopters or hexacopters
- FPV pilots flying larger platforms that accept 12-inch props
- Makers testing different motor and propeller combinations
- Hobbyists looking for a spare CW and CCW propeller pair
Buying Tip
Confirm your motor shaft diameter matches one of the included reducers (3 mm, 4.5 mm, or 6 mm) and that your frame has clearance for 12-inch propellers before ordering.
Elecvora expert review
Our verdict
The Pro-Range 1238 offers a practical combination of size, material, and included adapters for multirotor builders. It is a straightforward choice for those who need a matched CW/CCW pair in the 12-inch class without extra frills.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Matched CW and CCW pair simplifies ordering
- Glass fiber nylon provides a good strength-to-weight ratio
- Three reducer sizes included for flexible motor shaft fit
- Lightweight at about 48 g per propeller
Cons
- Mounting hardware is not included
- Propellers may need balancing before use
- Only one pair is supplied, so spare props require a separate order
Best for
DIY multirotor builders using 12-inch propellers who need a matched pair with reducers
Not ideal for
Pilots of small frames or motors that cannot accept 12-inch props or the included shaft sizes
Specifications
| Prop. Diameter (inch) | 12 |
|---|---|
| Material | Glass Fiber Nylon |
| Rotation Direction | CCW, CW |
| Shaft Diameter | 7.8 mm |
| No. of Blades | 2 |
| Pitch(inch) | 3.8 |
| Rotation | 1CW+1CCW |
| Length (mm) | 304 |
| Plastic Reducers | 3, 4.5, 6 |
| Weight (g) | 48 |
| Color | Grey |
| Shipping Weight | 0.053 kg |
| Shipping Dimensions | 30 × 4 × 2 cm |
What's in the box
- 1 x Counter-Clockwise (CCW) Propeller 1238 (12x3.8)
- 1 x Clockwise (CW) Propeller 1238 (12x3.8)
- A set of propeller reducers (3 mm, 4.5 mm, 6 mm)
Frequently Asked Questions
What is included in the package?
What size motor shaft do these propellers fit?
Are these propellers suitable for a quadcopter?
Do I need to balance these propellers?
Is mounting hardware included?
How should I care for these propellers?
Overview
The Pro-Range 1238 is a two-blade propeller set designed for multi-copter and drone builds that use larger frames. Each propeller has a 12-inch diameter and a 3.8-inch pitch, giving a balance of thrust and efficiency for multirotor applications. The blades are molded from glass fiber reinforced nylon in a gray color, a material choice that combines rigidity with enough flexibility to handle minor impacts during flight and handling.
This listing is for a matched pair: one clockwise (CW) and one counter-clockwise (CCW) propeller. That pairing is essential for multirotor aircraft, where opposing rotation directions cancel torque and keep the frame stable. A set of plastic reducers in 3 mm, 4.5 mm, and 6 mm sizes is included so the 7.8 mm hub bore can be adapted to different motor shaft diameters.
Key Features
- 12 x 3.8 inch size: A 304 mm diameter and 3.8-inch pitch suit multi-copter builds that need substantial disk area.
- Glass fiber nylon: The composite material provides a stiff yet resilient blade that resists flex under load.
- CW and CCW pair: One of each rotation direction is supplied for proper torque balance on multirotor frames.
- Reducer set included: 3 mm, 4.5 mm, and 6 mm plastic reducers let you mount the prop on a range of shaft sizes.
- Lightweight: At about 48 g per propeller, the pair adds limited rotating mass.
- Gray finish: A neutral color that is easy to see and matches many airframes.
Specifications Explained
Diameter and pitch: The 12-inch diameter refers to the circle the propeller sweeps, while the 3.8-inch pitch describes how far the prop would theoretically move forward in one revolution. Together they define the thrust and speed characteristics of the propeller for a given motor and frame.
Shaft diameter and reducers: The propeller hub has a 7.8 mm bore. The included plastic reducers fill the gap between the bore and smaller motor shafts, allowing you to use 3 mm, 4.5 mm, or 6 mm shafts without wobble. Always fit the reducer that matches your motor shaft for secure mounting.
Material and weight: Glass fiber nylon is a common choice for multirotor propellers because it is light and stiff. At 48 g per blade, these propellers are suitable for builds where weight savings matter but durability is still required.
Compatibility and Requirements
These propellers are intended for multi-copter and drone use. They require a motor with a shaft that matches one of the included reducers (3 mm, 4.5 mm, or 6 mm) and a frame that can accommodate 12-inch propellers. Mounting hardware such as prop nuts or bolts is not listed in the package contents, so check your motor's mounting method before installation. The propellers are not pre-balanced and may require balancing for smooth operation.
Typical Uses
These propellers are well suited to DIY multirotor projects, larger RC drones, and general aerial platforms that use 12-inch props. They can be used on quadcopters, hexacopters, and other multirotor configurations where a 12-inch propeller fits. The included reducers make them adaptable to a variety of motor shafts, which is helpful for builders who experiment with different motor combinations.
What's in the Box
- 1 x Counter-Clockwise (CCW) Propeller 1238 (12x3.8)
- 1 x Clockwise (CW) Propeller 1238 (12x3.8)
- A set of propeller reducers (3 mm, 4.5 mm, 6 mm)
Quick specs
- Prop. Diameter (inch)
- 12
- Material
- Glass Fiber Nylon
- Rotation Direction
- CCW, CW
- Shaft Diameter
- 7.8 mm
- No. of Blades
- 2
- Pitch(inch)
- 3.8




















