Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A tiny 0.91 inch OLED module with a 128x32 white pixel display and SSD1306 driver over a four-pin I2C interface. It runs from 3V to 5V and adds compact status readouts to small electronics projects.

Key Highlights

  • 0.91 inch OLED panel with 128x32 white pixels
  • SSD1306 driver over a simple four-pin I2C interface
  • Wide 3V to 5V operating voltage for flexible builds
  • Slim 38 x 12 mm board weighing only 3 g
  • Rated for -40 to 70 degrees Celsius environments
  • Self-emitting OLED pixels need no backlight

Ideal For

  • Makers building compact microcontroller status displays
  • Electronics hobbyists adding readouts to sensor projects
  • Wearable and handheld prototype developers
  • Robot and model builders needing a lightweight screen
  • Workshops that want a small I2C diagnostic display

Buying Tip

Check that your project has an I2C bus and can supply 3V to 5V before ordering, since the module uses a four-pin GND, VCC, SCK and SDA connection.

Elecvora expert review

Our verdict

This is a practical little display for projects where space is limited and wiring should stay simple. The 128x32 white OLED panel and SSD1306 driver cover basic readouts well, provided your project can supply 3V to 5V over I2C.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very small and light at 3 g
  • Simple four-pin I2C wiring
  • Wide 3V to 5V supply range
  • Clear white pixels without a backlight

Cons

  • Only 128x32 pixels, so text must be small
  • Requires your own wiring and controller
  • No mounting hardware or cables included

Best for

Compact microcontroller projects needing a simple status screen

Not ideal for

Projects that need a large or colour display

Specifications

Model No. / NameOLED Display Module
Display Size (Inch)0.91
Display Resolution (pixel)128 × 32
ChipSSD1306
Display Area (mm)22.384 × 5.584mm
Operating Voltage (V)3-5V
Interface TypeIIC
Operating Temperature (°C)-40º~70º Celsius
Pixel ColorWhite
Length (mm)38
Width (mm)12
Weight (g)3
Shipping Weight0.005 kg
Shipping Dimensions5 × 8 × 1 cm

What's in the box

  • 1 x GoldenMorning 0.91 inch I2C OLED Display Module, white pixels

Frequently Asked Questions

What interface does this OLED module use?
It uses a four-pin I2C interface with GND, VCC, SCK and SDA connections. Only clock and data lines are needed for communication.
What voltage does the module require?
The module operates from 3V to 5V, so it can share power with many common microcontroller boards within that range.
What is the display resolution?
The panel is 128x32 pixels with white pixels, giving a small monochrome readout for text, numbers and simple icons.
Is a controller or wiring included?
No. The package contains the display module only, so you will need your own microcontroller, wiring and power source.
What driver chip does it use?
It uses the SSD1306 driver, which is supported by many common OLED display libraries for 128x32 panels.
How should I care for the module?
Keep it within the rated -40 to 70 degrees Celsius range and avoid bending or pressing on the glass panel. Handle the board by its edges when wiring.

Overview

The GoldenMorning 0.91 inch I2C OLED Display Module is a small monochrome screen built around a 128x32 pixel OLED panel and an SSD1306 driver chip. It is intended for projects that need a readable readout in a very small footprint, such as handheld tools, compact sensors or wearable prototypes. Because the pixels emit their own light, the display does not rely on a backlight, which keeps the outline slim and the contrast crisp.

Communication happens over a four-pin I2C connection, so wiring stays simple: ground, supply voltage, clock and data. The module accepts 3V to 5V, making it convenient for a range of microcontroller boards.

Key Features

  • 128x32 pixel monochrome OLED panel with white pixels
  • SSD1306 driver IC with I2C interface
  • Four-pin connection: GND, VCC, SCK and SDA
  • Operating voltage range of 3V to 5V
  • Compact 38 x 12 mm board weighing about 3 g
  • Operating temperature range of -40 to 70 degrees Celsius

Specifications Explained

Display size and resolution

The 0.91 inch panel offers 128x32 pixels across an active area of 22.384 x 5.584 mm. That is enough space for several lines of small text, numeric readings or simple icons, while keeping the overall module narrow enough for tight enclosures.

Driver and interface

The SSD1306 controller handles the display, and the I2C interface uses only clock and data lines alongside power and ground. This reduces the number of wires needed compared with parallel displays.

Power and environment

A 3V to 5V supply range lets the module share power with many common logic systems. The rated -40 to 70 degrees Celsius range means it can be used in cold outdoor enclosures as well as normal indoor conditions.

Compatibility and Requirements

The module is designed for 3V to 5V microcontrollers and communicates over I2C. You will need a controller with an I2C bus and suitable connections for GND, VCC, SCK and SDA. Because only the display module is supplied, plan for your own jumper wires or soldered connections and a compatible power source.

Typical Uses

  • Status and diagnostic readouts on compact microcontroller projects
  • Small sensor displays for temperature, voltage or counts
  • Handheld instruments and wearable prototypes
  • Robot and model builds needing a lightweight screen

What's in the Box

One GoldenMorning 0.91 inch I2C OLED Display Module with white pixels. Other project parts, wiring and power supplies are not included.

Quick specs

Model No. / Name
OLED Display Module
Display Size (Inch)
0.91
Display Resolution (pixel)
128 × 32
Chip
SSD1306
Display Area (mm)
22.384 × 5.584mm
Operating Voltage (V)
3-5V
See all specifications