Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 0.96-inch OLED module offers a sharp 128x64 blue display with I2C connectivity for easy microcontroller integration. Its high contrast and wide viewing angle make it ideal for compact DIY electronics projects.

Key Highlights

  • 0.96-inch OLED screen with 128x64 pixel resolution
  • I2C interface for simple 4-wire connection
  • Wide 3.3V to 5V operating voltage range
  • High contrast and wide viewing angle without backlight
  • Compact 27.5 x 27.5 mm board with pre-soldered header
  • SSD1306 controller for broad library support

Ideal For

  • Arduino and Raspberry Pi enthusiasts
  • DIY electronics hobbyists
  • Makers building portable devices
  • Engineering students learning I2C
  • Developers creating compact user interfaces

Buying Tip

Check that your project has an I2C bus available and that you have the appropriate library for the SSD1306 controller.

Elecvora expert review

Our verdict

The GoldenMorning 0.96-inch OLED module is a reliable and easy-to-use display for adding visual output to microcontroller projects. Its I2C interface and wide voltage range make it accessible to beginners and versatile for advanced users.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple 4-pin I2C connection
  • High contrast and wide viewing angle
  • Compact and lightweight design
  • Wide operating voltage range
  • Pre-soldered header saves time

Cons

  • Limited to blue monochrome display
  • No onboard voltage regulator, so supply must match logic level
  • Requires external pull-up resistors in some configurations

Best for

Microcontroller projects needing a small, clear display

Not ideal for

Applications requiring full-color or large displays

Specifications

Model No. / NameOLED Display Module
Display Size (Inch)0.96
Display Resolution (pixel)128 × 64
Display Area (mm)21.74 x 10. 86mm
Operating Voltage (V)3.3-5V
Operating Temperature (°C)-40º~70º Celsius
InterfaceI2C IIC
Length (mm)27.5
Width (mm)27.5
Weight (g)7
ColorBlue
Shipping Weight0.01 kg
Shipping Dimensions5 × 5 × 2 cm

What's in the box

  • 1 x GoldenMorning 0.96 Inch I2C/IIC 4pin OLED Display Module BLUE

Frequently Asked Questions

What is the resolution of this OLED display?
The display has a resolution of 128x64 pixels, providing clear text and simple graphics.
What voltage does the module require?
It operates from 3.3V to 5V, making it compatible with most common microcontrollers.
How do I connect the display to my Arduino?
Connect VCC to 3.3V or 5V, GND to ground, SCL to the I2C clock pin (A5 on Uno), and SDA to the I2C data pin (A4 on Uno).
Is a library required to use this display?
Yes, you will need a library compatible with the SSD1306 controller, such as Adafruit_SSD1306 for Arduino.
What is included in the package?
The package includes one OLED display module with a pre-soldered 4-pin male header.
Can I use this display outdoors?
Yes, the operating temperature range is -40°C to 70°C, but avoid direct exposure to moisture.

Overview

The GoldenMorning 0.96 Inch I2C OLED Display Module is a compact, self-emitting display designed for electronics enthusiasts and professionals. It uses organic light-emitting diode technology to produce bright blue text and graphics without a backlight, resulting in high contrast and low power consumption. The module measures just 27.5 mm square and weighs 7 grams, making it easy to integrate into space-limited projects. With a resolution of 128x64 pixels and an active display area of 21.74 x 10.86 mm, it provides clear readability for status indicators, menus, and sensor data. The 4-pin I2C interface simplifies wiring to popular microcontrollers, and the onboard SSD1306 controller ensures compatibility with widely available libraries.

Key Features

  • Self-emitting OLED panel: No backlight needed, delivering deep blacks and high contrast.
  • 128x64 pixel resolution: Sharp enough for text, icons, and simple graphs.
  • I2C (IIC) interface: Uses only four pins (VCC, GND, SCL, SDA) for easy connection.
  • Wide voltage range: Operates from 3.3V to 5V, suitable for many development boards.
  • Pre-soldered 4-pin header: Ready for immediate use with jumper wires or direct soldering.
  • Compact and lightweight: 27.5 x 27.5 mm board and 7 g weight for portable designs.
  • SSD1306 controller: Well-documented and supported by common libraries.

Specifications Explained

The 0.96-inch display size refers to the diagonal measurement of the screen, while the 128x64 pixel resolution determines the level of detail you can show. The active display area of 21.74 x 10.86 mm gives you a clear idea of the physical viewing region. The I2C interface uses two data lines (SCL and SDA) plus power and ground, minimizing the number of pins required on your microcontroller. The operating voltage of 3.3V to 5V means the module can be powered directly from most common development boards without level shifting. The wide operating temperature range of -40°C to 70°C ensures reliable performance in harsh environments. The SSD1306 controller handles the display driving, and its popularity means you can find ready-made libraries for Arduino, Raspberry Pi, and other platforms.

Compatibility and Requirements

This module is designed for microcontrollers that support I2C communication and can supply 3.3V or 5V. It requires only four connections: VCC, GND, SCL, and SDA. No additional components are needed for basic operation, although pull-up resistors may be required depending on your host device. The pre-soldered header accepts standard jumper wires or can be soldered directly into a PCB. Ensure your development environment has a library compatible with the SSD1306 controller, such as the Adafruit SSD1306 library for Arduino.

Typical Uses

This OLED display is ideal for a wide range of projects, including portable weather stations, battery monitors, wearable devices, and DIY smart home controllers. Its small size and high contrast make it perfect for displaying sensor readings, system status, or simple user interfaces. Hobbyists and engineers use it to add a visual output to Arduino, ESP32, and other microcontroller projects. The blue display is easy to read in various lighting conditions, and the wide viewing angle ensures visibility from different positions.

What's in the Box

The package includes one GoldenMorning 0.96 Inch I2C/IIC 4pin OLED Display Module in blue. The module comes with a pre-soldered 4-pin male header for immediate use.

Quick specs

Model No. / Name
OLED Display Module
Display Size (Inch)
0.96
Display Resolution (pixel)
128 × 64
Display Area (mm)
21.74 x 10. 86mm
Operating Voltage (V)
3.3-5V
Operating Temperature (°C)
-40º~70º Celsius
See all specifications