
1 / 5 · Click to enlarge
At a glance
This brushed / brushless dc motor driver is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.15 kg.
Key Highlights
- Shipping Weight: 0.15 kg
Ideal For
- Robots and moving models
- Automation projects
- Replacement for a worn motor
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Shipping Weight | 0.15 kg |
|---|---|
| Shipping Dimensions | 16 × 10 × 7 cm |
Overview
The H-Bridge For Motor Control, 800V High Voltage H-Bridge Driver Module with PWM Control & Current Sensing is listed in our brushed / brushless dc motor driver range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.15 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 16 × 10 × 7 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The 800V High Voltage H-Bridge Driver Module is designed for advanced motor control and high-voltage switching applications. Built with 800V 8A MOSFETs and integrated high-low side gate drivers, this module supports efficient PWM-based speed and direction control for DC motors and inverter systems. It features built-in current sensing through a shunt resistor for monitoring and control applications.
TVS diode protection on both input and output enhances operational safety during voltage spikes. Compatible with both 3.3V and 5V logic control systems, the module is suitable for robotics, industrial automation, solar pump controllers, and EV subsystems. Its compact 130 x 65 mm design makes it easy to integrate into prototypes and embedded systems requiring reliable high-voltage motor driving capability.
Features:
- Supports up to 800V high-voltage operation
- Uses 800V 8A MOSFETs for power switching
- Integrated high and low side gate drivers
- Built-in current sensing with shunt feedback
- PWM speed control support up to 20kHz
- TVS protection on input and output lines
- Compatible with 3.3V and 5V control logic
- Compact ready-to-use driver module design
Specifications:
- Product Type: High Voltage H-Bridge Driver Module
- Voltage Support: Up to 800V
- MOSFET Specification: 800V 8A
- Input Supply: AC/DC
- Protection Type: TVS Diode Protection
- Gate Driver: High-Low Side Drivers
- Current Measurement: Shunt at Negative Line
- Logic Voltage: 3.3V / 5V Compatible
- PWM Frequency Range: Up to 20kHz
- Board Dimensions: 130 x 65 mm
- Output Type: AC-0-AC
- Control Inputs: Q1, Q2, Q3, Q4 Inputs
- Auxiliary Supply: 12V
- Ground Pin: Available
- Dimentions: 130 x 65 x 20 mm
- Weight: 47 g
Package Includes:
1 x H-Bridge For Motor Control, 800V High Voltage H-Bridge Driver Module with PWM Control & Current Sensing
2 x 2-pin JST Wire Harness
1 x 6-pin JST Wire Harness













