
1 / 3 · Click to enlarge
AI Summary
A single CCW folding propeller for Hobbywing X6-SE and H6M propulsion systems, made from carbon fiber reinforced polymer with a 22 x 7.0 inch profile. The folding hub and included adapter make transport and installation straightforward while delivering efficient thrust in the 2.0–5.0 kg range.
Key Highlights
- 22 x 7.0 inch folding blade in carbon fiber reinforced polymer
- Counter-clockwise rotation for matching motor direction
- Includes adapter for compatible X6-SE and H6M installation
- Recommended thrust range of 2.0–5.0 kg per propeller
- Operating speed range of 3000–4500 RPM
- Matte surface finish helps reduce glare outdoors
Ideal For
- Industrial UAV operators running X6-SE or H6M propulsion systems
- Drone training and education programmes needing replaceable folding props
- Aerial photography and mapping crews flying multirotor platforms
- Inspection and survey teams maintaining a spare CCW propeller
- Builders assembling a counter-clockwise position on a compatible airframe
Buying Tip
Confirm you are ordering the CCW variant and that your airframe uses an X6-SE or H6M propulsion system, since this propeller is not listed as compatible with other setups.
Elecvora expert review
Our verdict
A sensible replacement or spare for anyone already running Hobbywing X6-SE or H6M hardware, with a folding hub that makes transport easier and a material choice that keeps weight down. It is a system-specific part, so it only makes sense if your propulsion setup matches.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Light 67 g blade with stiff carbon fiber reinforced polymer construction
- Folding hub simplifies packing and storage
- Adapter included for the intended propulsion systems
- Clear thrust and RPM guidance for planning
- Matte finish reduces glare outdoors
Cons
- Sold as a single CCW propeller, so a clockwise counterpart may be needed separately
- Compatibility is limited to X6-SE and H6M systems
- No dimensions or warranty details are stated for the item
Best for
Owners of X6-SE or H6M propulsion systems needing a CCW spare or replacement
Not ideal for
Pilots flying airframes that do not use Hobbywing X6-SE or H6M propulsion
Specifications
| Shipping Weight | 0.07 kg |
|---|---|
| Shipping Dimensions | 28 × 10 × 3 cm |
What's in the box
- 1 x Hobbywing X6 SE 2270 Propeller with Adapter – CCW
Frequently Asked Questions
Is this a pair of propellers?
Which propulsion systems does it fit?
What thrust and speed should I expect?
What is the propeller size?
How much does it weigh?
How should I care for it?
Overview
The Hobbywing X6 SE 2270 is a single counter-clockwise folding propeller built for integrated drone propulsion systems. Its 22 inch diameter and 7.0 inch pitch give it a large swept area, which suits multirotor platforms that need efficient thrust rather than high RPM. The blade is formed from carbon fiber reinforced polymer, a material choice that balances low weight with the rigidity required for stable flight.
At 67 g, the propeller adds little mass at the motor end, and the folding hub lets the blades lie flat when the aircraft is packed away. A matte finish keeps the surface looking clean and reduces reflections that can be distracting in bright outdoor conditions.
Key Features
- Folding design: blades fold back for easier transport and storage between flights.
- Carbon fiber reinforced polymer: light, stiff construction for dependable thrust delivery.
- CCW rotation: matched to counter-clockwise motor positions on compatible systems.
- Adapter included: the supplied adapter supports installation on the intended propulsion systems.
- Matte finish: reduces glare and helps the propeller stay presentable over time.
Specifications Explained
Size and pitch
The 2270 designation refers to a 22 inch diameter and 7.0 inch pitch. A larger diameter with moderate pitch is typical of platforms that prioritise lift efficiency at lower rotational speeds, which is why the recommended operating window sits between 3000 and 4500 RPM.
Thrust and tension
Hobbywing lists a recommended thrust range of 2.0–5.0 kg and an ultimate tension of 11.0 kg. The recommended range describes the working envelope for normal flight; the ultimate figure is a strength limit, not a target for regular operation.
Weight
Each propeller weighs 67 g. Keeping rotating mass low helps motors respond cleanly and reduces the load on the hub assembly.
Compatibility and Requirements
This propeller is engineered for the HOBBYWING XRotor X6-SE and H6M propulsion systems. It is the counter-clockwise variant, so it must be paired with the correct motor position and a clockwise counterpart where the airframe requires one. Installation uses the included adapter. No other compatibility is stated by the manufacturer, so check your propulsion system before ordering.
Typical Uses
These propellers are aimed at drone education and training, aerial photography, mapping and inspection, and other industrial UAV work where consistent thrust and efficiency matter more than aggressive flight characteristics.
What's in the Box
- 1 x Hobbywing X6 SE 2270 Propeller with Adapter – CCW



















