
1 / 4 · Click to enlarge
AI Summary
A compact dual-channel H-bridge board for driving two DC motors or one 4-wire stepper motor. It works from 2.5V to 12V and handles up to 800mA per channel with simple PWM speed and direction control.
Key Highlights
- Dual independent L9110 driver channels
- 2.5V to 12V supply range for 3.3V and 5V systems
- 800mA continuous current per channel
- TTL/CMOS compatible inputs for direct MCU connection
- Built-in clamping diodes for inductive loads
- Four mounting holes for easy installation
Ideal For
- Robotics hobbyists building small robots
- Students learning motor control
- Makers using 3.3V or 5V microcontrollers
- DIY automation projects
- Educators teaching electronics
Buying Tip
Check that your motor's stall current does not exceed 800mA per channel to avoid overheating the driver.
Elecvora expert review
Our verdict
The L9110S is a simple, affordable dual motor driver that works well for small DC motors and lightweight steppers. It is easy to integrate with common microcontrollers and offers good value for basic robotics projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact and lightweight
- Wide voltage range suits many projects
- Simple wiring with screw terminals and headers
- Built-in protection diodes
Cons
- Limited to 800mA per channel, not for high-power motors
- No onboard voltage regulator for logic supply
- Documentation is minimal; users need to understand H-bridge basics
Best for
Small robotics and educational projects with low-current motors
Not ideal for
High-power motors or applications requiring more than 800mA per channel
Specifications
| Model Series | L9110 Series |
|---|---|
| Voltage Rating (V) | 2.5 to 12VDC |
| Current Rating (A) | 0.8 |
| Input Voltage (VDC) | 2.5-12V |
| Operating Temperature (°C) | 0.8A |
| Length (mm) | 29.2 |
| Width (mm) | 23 |
| Weight (g) | 7 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 8 × 6 × 3 cm |
What's in the box
- 1 x L9110 DC Stepper Motor Driver Board H-Bridge
Frequently Asked Questions
Can this board drive a stepper motor?
What is the maximum motor voltage?
How much current can each channel handle?
Is it compatible with 3.3V microcontrollers?
What is included in the package?
How do I control the speed of the motors?
Overview
The L9110S dual-channel H-bridge motor driver board is a compact solution for adding bidirectional motor control to your electronics projects. It uses two independent L9110 motor driver ICs, each capable of delivering up to 800mA continuous current, so you can drive two small DC motors or a single four-wire two-phase stepper motor. The board accepts a wide supply voltage of 2.5V to 12V, making it compatible with both 3.3V and 5V microcontrollers.
Motor connections are made through two sets of screw terminals, while control signals are routed to female header pins for quick jumper-wire hookup. The board also includes four mounting holes for secure installation on robots or project enclosures.
Key Features
- Two independent L9110 driver channels
- Wide 2.5V to 12V operating voltage
- 800mA continuous output current per channel
- Low saturation voltage for efficient operation
- TTL/CMOS compatible inputs connect directly to MCU pins
- Built-in clamping diodes protect against inductive spikes
- Pin high-pressure protection function
- Compact 29.2mm x 23mm board with four mounting holes
Specifications Explained
Voltage rating (2.5V to 12V): This range allows the board to work with common logic levels and battery packs, from 3.3V microcontroller systems up to 12V supplies. It is important not to exceed 12V to avoid damaging the ICs.
Current rating (0.8A per channel): Each channel can supply up to 800mA continuously. This is suitable for small DC motors and lightweight stepper motors. For higher-current motors, consider a driver rated for more current.
Operating temperature (0-80°C): The board is designed to operate within this range. Ensure adequate ventilation if running near the upper limit or under continuous load.
Dimensions and weight: At 29.2mm long, 23mm wide, and only 7g, the board is easy to fit into tight spaces. The four mounting holes simplify installation.
Compatibility and Requirements
The L9110S board is compatible with microcontrollers that output TTL or CMOS logic levels, such as those operating at 3.3V or 5V. It requires an external power supply between 2.5V and 12V for the motor, and the control inputs connect directly to MCU I/O pins. No additional driver circuitry is needed. The board has female headers for signal input and screw terminals for motor output.
Typical Uses
- Small robot cars and platforms
- DIY motorized projects
- Educational robotics kits
- Driving a single 4-wire 2-phase stepper motor
- Automated prototypes requiring bidirectional motor control
What's in the Box
1 x L9110 DC Stepper Motor Driver Board H-Bridge
Quick specs
- Model Series
- L9110 Series
- Voltage Rating (V)
- 2.5 to 12VDC
- Current Rating (A)
- 0.8
- Input Voltage (VDC)
- 2.5-12V
- Operating Temperature (°C)
- 0.8A
- Length (mm)
- 29.2













