Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The MakerBase MKS Gen_L v1.0 combines ATmega2560 and RAMPS 1.4 on one 4-layer PCB for simpler wiring and stable performance. It accepts 12–24V input and reduces heated bed current to 1/4, solving MOSFET heat issues.

Key Highlights

  • Integrated ATmega2560 and RAMPS 1.4 on a single PCB
  • High-quality 4-layer PCB for improved stability
  • Accepts 12V–24V input with special power chip
  • Reduces heated bed current to 1/4, minimizing MOSFET heat
  • Works with Marlin firmware, same config as RAMPS 1.4
  • Supports LCD2004, LCD12864, and MKS TFT displays

Ideal For

  • DIY 3D printer builders designing custom machines
  • Makers upgrading from RAMPS 1.4 setups
  • Enthusiasts needing reliable 24V heated bed control
  • Users requiring multiple display options
  • Projects needing external stepper driver support

Buying Tip

Check that your stepper drivers and display are compatible with the MKS Gen_L v1.0 before purchasing, and consider 24V operation to benefit from reduced heated bed current.

Elecvora expert review

Our verdict

The MakerBase MKS Gen_L v1.0 offers a streamlined, integrated solution for 3D printer control, reducing wiring complexity and improving reliability. Its 24V capability and heated bed current reduction make it a smart choice for DIY builders.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrated design simplifies wiring and saves space
  • 4-layer PCB enhances durability
  • 24V input reduces heated bed current and MOSFET heat
  • Direct replacement for RAMPS 1.4 with Marlin firmware
  • Multiple display and expansion options

Cons

  • Requires separate stepper drivers (not included)
  • No onboard WiFi or Ethernet connectivity
  • Limited to Marlin firmware, no advanced 32-bit features

Best for

DIY 3D printer builders seeking a reliable, integrated controller with 24V support

Not ideal for

Users wanting a plug-and-play board with built-in drivers and wireless connectivity

Specifications

Item TypeController Board
CompatibilityMKS TFT
Input Voltage (VDC)24
Length (mm)110
Width (mm)85
Weight (g)79
Shipping Weight0.107 kg
Shipping Dimensions17 × 13 × 2 cm

What's in the box

  • 1 x MakerBase MKS Gen_L v1.0 3D Printer Controller Board
  • 1 x USB Cable

Frequently Asked Questions

What firmware does the MKS Gen_L v1.0 use?
It uses Marlin firmware, configured in the same way as RAMPS 1.4.
Can I use 24V with this board?
Yes, it accepts 12V–24V input. At 24V, the heated bed current is reduced to 1/4, which helps prevent MOSFET overheating.
Which displays are compatible?
It supports LCD2004, LCD12864, and MKS TFT24/28/32/35/70 displays.
Does it come with stepper drivers?
No, stepper drivers are not included. You will need to purchase them separately.
What is included in the package?
The package includes the MKS Gen_L v1.0 controller board and a USB cable.
Can I connect external large stepper drivers?
Yes, the board has provisions to connect external large stepper drivers for higher current requirements.

Overview

The MakerBase MKS Gen_L v1.0 is a 3D printer controller board that merges the popular ATmega2560 microcontroller and RAMPS 1.4 shield into a single, integrated PCB. This design eliminates the need for stacked boards and reduces wiring complexity, resulting in a more stable and reliable setup. Built on a high-quality 4-layer PCB, it is engineered for DIY 3D printer enthusiasts who demand flexibility and control.

Key Features

  • Integrated Design: Combines 2560 and RAMPS 1.4 functionality on one board for easier wiring and enhanced stability.
  • 4-Layer PCB: High-quality construction ensures durability and reliable performance.
  • Wide Voltage Input: Special power chip supports 12V–24V input, with 24V reducing heated bed current to 1/4, efficiently solving MOSFET heat problems.
  • Marlin Firmware Ready: Uses Marlin firmware with the same configuration method as RAMPS 1.4, allowing direct replacement.
  • Display Compatibility: Works with LCD2004, LCD12864, and MKS TFT24/28/32/35/70 displays.
  • Expansion Interfaces: Retains Servos, AUX-1, and AUX-2 interfaces from RAMPS 1.4, and provides three 5V and three 12V output interfaces.
  • External Driver Support: Capable of connecting external large stepper drivers for demanding applications.

Specifications Explained

Input Voltage (12–24V): The board accepts a wide voltage range, with 24V operation significantly reducing current draw on the heated bed circuit, which lowers heat generation in the MOSFETs. Dimensions (110 × 85 mm): Compact footprint fits most printer frames. Weight (79 g): Lightweight yet robust. ATmega2560 Microcontroller: Provides ample processing power for complex printing tasks and supports multiple motor drivers.

Compatibility and Requirements

The MKS Gen_L v1.0 is compatible with MKS TFT displays and also supports LCD2004 and LCD12864 screens. It requires Marlin firmware, configured similarly to RAMPS 1.4. The board is designed to work with standard stepper drivers and can connect external large stepper drivers. A USB cable is included for connection to a computer.

Typical Uses

Ideal for DIY 3D printer builds, upgrades from RAMPS 1.4 setups, and projects requiring reliable control of multiple steppers, heated beds, and displays. Suitable for enthusiasts building custom printers or retrofitting existing machines.

What's in the Box

  • 1 x MakerBase MKS Gen_L v1.0 3D Printer Controller Board
  • 1 x USB Cable

Quick specs

Item Type
Controller Board
Compatibility
MKS TFT
Input Voltage (VDC)
24
Length (mm)
110
Width (mm)
85
Weight (g)
79
See all specifications