
1 / 3 · Click to enlarge
At a glance
Made by Makerbase, this 3d printer display and controller is a good fit for 3D printing users. Main specs: item type Controller Board; compatibility General Purpose; input voltage (vdc) 12–24. Check that your power source supplies 12–24 before connecting it.
Key Highlights
- Item Type: Controller Board
- Compatibility: General Purpose
- Input Voltage (VDC): 12–24
Ideal For
- Upgrading or repairing a 3D printer
- Spare parts for long prints
- Testing new materials
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Controller Board |
|---|---|
| Compatibility | General Purpose |
| Input Voltage (VDC) | 12–24 |
| Microcontroller | STM32F407VET6 |
| Flash Memory | 512 KB |
| Axis | 8 |
| PWM FANs | 3 |
| Length (mm) | 160 |
| Width (mm) | 90 |
| Weight (g) | 145 |
| Shipping Weight | 0.174 kg |
| Shipping Dimensions | 22.5 × 14 × 2 cm |
Overview
The MakerBase MKS Monster8 32-bit Control Board 3D Printer Parts, made by Makerbase, is listed in our 3d printer display and controller range and suits 3D printing users. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Controller Board
- Compatibility: General Purpose
- Input Voltage (VDC): 12–24 (match this to your power supply; too high a voltage can damage the part)
- Microcontroller: STM32F407VET6 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Flash Memory: 512 KB (more memory leaves room for larger programs and buffers)
- Axis: 8
- PWM FANs: 3
- Length (mm): 160 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- MORE FUN WITH STRONG DIY SUPPORT: Makerbase MKS monster 8 for voron large 3d printers have 8 stepper drivers and 9 motor interface(Driver0,1,2-1,2-2,3,4,5,6,7) which support multiple motor drives such as A4988, DRV8825, LV8729, TMC2208, TMC2209, TMC2225, TMC2226, gives more flexible DIY upgrade capability. You can replace the motor drive by yourself. The Monster8 mainborad can be used on Voron 2.4 Creality Ender-3 Ender-3 V2 and Ender-3 pro, please update the firmware on Github first.
- MARLIN AND KLIPPER FIRMWARE SUPPORT: Makerbase MKS monster8 3d printer motherboad support marlin 2.0.x and klipper, requires a Klipper host such as Raspberry Pi or MKS PI
- FLEXIBLE MATCHING FOR DIVERSITY: EXP1 and EXP2 for Makerbase MKS control board supported a wide variety of lcd display such as LCD2004, LCD12864, MKS MINI12864 V1.0, MKS MINI12864 V3.0, and also works for Makerbase touch screen including MKS TFT24, MKS TFT28, MKS TFT32, MKS TFT35, MKS H43
- MOTHERBOARD EXPANSION FUNCTION: 6 endstop support power select(X-,X+,Y-,Y+,Z-,Z+) and 3D TOUCH(PA8) interface, support DFU mode set by button(Boot0), Support driver power select(5V or 3.3V), Support TMC UART and SPI mode, SENSORLESS_HOMING function(Diag0-5,connect to X-,Y-,Z-,X+,Y+,Z+) and also Integrated SPI communication micro sd card and reserved SPI signal UDISK and virtual USB device.
- MCU is STM32F407VET6, 168MHz, 512K flash, 192KB RAM, Built-in CAN transceiver and interface(connect to CAN)
- DC12-24V input(2 MP1584EN Output DC12V(For FANs) and DC5V), Integrated SPI communication microsd card and reserved SPI signal interface.
- TVS power spike processing to protect the back-end circuit, 4K eeprom on board(connect to I2C)
Package Includes:
1 x MakerBase MKS Monster8 32-bit Control Board 3D Printer Parts
1 x USB cable
Quick specs
- Item Type
- Controller Board
- Compatibility
- General Purpose
- Input Voltage (VDC)
- 12–24
- Microcontroller
- STM32F407VET6
- Flash Memory
- 512 KB
- Axis
- 8



















